Poly(phenylene oxide) copolymer anion exchange membranes

Poly(phenylene oxide) block and random copolymers are synthesized by oxidative polymerization of 2,6-dimethylphenol and 2,6-diphenylphenol for potential alkaline exchange membrane application. The copolymers are functionalized on the methyl substituted repeat units through a two-step process to produce pendent quaternary ammonium cationic groups. The amount of quaternary ammonium cations and the ion exchange capacity are quantified through titration measurements. Ionic conductivity of the copolymer membranes is measured by electrochemical impedance spectroscopy. Block copolymers show increased bromide conductivity at higher ion exchange capacities compared with the random copolymer analogs. The bromide conductivity for a block copolymer film with an ion exchange capacity of 1.27 mequiv/g reaches 26 mS/cm at 90 °C and 95% relative humidity. The hydroxide conductivity for the same film was measured to be 84 mS/cm at 80 °C and 95% relative humidity. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013, 51, 1770–1778, 2013     

Easy and effective method to produce functionalized particles for cellular uptake

In this contribution, a versatile approach for the synthesis of functionalized particles for drug delivery is presented, using two nonaggressive standardized procedures. The first procedure considered is the functionalization of an azido‐terminated α‐norbornenyl poly(ethylene oxide) (PEO) macromonomer with an alkyne‐containing active molecule via the copper catalyzed azide alkyne cycloaddition, click type reaction. The functionalized macromonomer is then polymerized by Ring‐Opening Metathesis Polymerization (ROMP) in dispersion to form functionalized particles. The second procedure consists in synthesizing particles by ROMP in dispersed media of norbornene with azido‐terminated α‐norbornenyl PEO macromonomer. The ROMP was initiated by the first generation Grubbs catalyst. Such functionalized core‐shell particles have stealthy properties due to their PEO shell and can be viewed as universal nanocarriers on which any alkyne‐modified active molecule can be grafted by click chemistry. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis of Acrylamide Molecularly Imprinted Polymers Immobilized on Graphite Oxide through Surface-Initiated Atom Transfer Radical Polymerization

A novel acrylamide (AA) molecularly imprinted polymer was synthesized by atom transfer radical polymerization (ATRP) on graphite oxide (GO) particles. Propionamide (PAM) was used as a dummy template molecule, hydroxy ethyl acrylate (HEA) as a functional monomer, ethylene glycol dimethacrylate (EDMA) as a crosslinking agent, and acetonitrile as both solvent and dispersion medium. Scanning electron microscopy (SEM) images and infrared spectroscopy (IR) confirmed that the molecularly imprinted polymers (MIP) were successfully grafted onto the surface of the GO particles. The corresponding adsorption kinetic curves and adsorption isotherms showed that the AA adsorption reached equilibrium after 5 h, with large amounts of AA being adsorped in the first 100 min. The maximum AA adsorption capacity was 123.48 µmol g^?1 according to Scatchard analysis, which indicated that the MIP possesses good AA adsorption capacity. This MIP-GO material was used to selectively determine AA in fried food samples.     

冲击波温度和压力对二氧化钛相变的影响

 介绍了一种简便易行的降低疏松固体物质冲击波温度的方法，其要点是用液体石蜡充填样品的空隙。以用粉末锐钛矿压装成型的样品为例，对比了不充填和充填液态石蜡时冲击波作用的结果。在同样的冲击加载条件下（均为钢飞片，撞击速度为3.16 km/s），估算两种样品中达到的压力分别为36.3 GPa和46.8 GPa，平均温度分别约为4.7×10³ ℃和2.0×10³ ℃，即：充填液态石蜡的样品中压力增加了约10 GPa，但平均温度降低了近3×10³ ℃。对冲击后回收样品的分析结果表明，不充填石蜡样品的主要产物为金红石，即冲击波产生的高温起了主要作用。而充填液态石蜡时，主要生成β-TiO₂高压相，即高压起了主要作用。     

关于氧化锌/双吡啶高氯酸盐非均相光诱导电子转移过程的研究

用ESR方法对9种不同双吡啶高氯酸盐与氧化锌组成的非均相体系的光诱导电子转移过程进行了系统的研究。ZnO-PQ⁺⁺-胶束-苯的分散系,经350nm~420nm的紫外光照后,PQ⁺⁺被还原成PQ⁺。具有大共轭结构的PQ⁺的ESR信号较强。胶束的存在也可使ESR信号增强。当体系充氧时,PQ⁺信号消失,并有超氧阴离子基O₂^·和羟基·OH被检出。     

Superparamagnetic iron oxide particles and positive enhancement for myocardial perfusion studies assessed by subsecond T1-weighted MRI

Superparamagnetic iron oxide particles (SPIOs) are usually referred to as T₂ MR contrast agents, reducing signal intensity (SI) on T₂-weighted MR images (negative enhancement). This study reports the original use of SPIOs as T₁-enhancing contrast agents, primarily assessed in vitro, and then applied to an in vivo investigation of a myocardial perfusion defect. Using a strongly T₁-weighted subsecond MR sequence with SPIOs intravenous (IV) bolus injection, MR imaging of myocardial vascularization after reperfusion was performed, on a dog model of coronary occlusion followed by reperfusion. Immediately after the intravenous bolus injection of 20 μmol/kg of SPIOs, a positive signal intensity enhancement was observed respectively, in the right and left ventricular cavity and in the nonischemic left myocardium. Moreover, compared to normal myocardium, the remaining ischemic myocardial region (anterior wall of the left ventricle) appeared as a lower and delayed SI enhancing area (cold spot). Mean peak SIE in the nonischemic myocardium (posterior wall) was significantly higher than in the ischemic myocardium (anterior wall) (110 ± 23% vs. 74 ± 22%, Mann-Whitney test < 1%, n₁ = 6, n₂ − n₁ = 0, U > 2). In conclusion, the T₁ effect of SPIOs at low dose, during their first intravascular distribution, suggests their potential use as positive markers to investigate the regional myocardial blood flow and some perfusion defects such as the “no-reflow phenomenon”.     

新型固体氧化物燃料电池连接件的结构设计与数值仿真

离散型连接件构成的固体氧化物燃料电池结构中存在反应气体容易产生涡流和较小压降等问题, 影响电池的输出功率. 本文基于COMSOL Multiphysics仿真平台, 建立离散型连接件的固体氧化物燃料电池的三维模型进行数值仿真模拟. 考虑其气体流量、组成、质量以及电化学反应过程, 研究离散型连接件电池阳极和阴极内反应气体的流速、流道阻力和浓度对电池工作性能的影响, 并与相同工况下的平直流道型连接件的固体氧化物燃料电池三维模型进行比较. 结果表明: 离散型连接件的固体氧化物燃料电池流道内的气体流速较大, 气体浓度下降较慢, 有较强的流道传质能力, 与平直流道型连接件的固体氧化物燃料电池相比, 离散型连接件电池的最大输出功率提升了61.27％.     

Rapid thermal annealing effects on the structural and optical properties of Na–N codoped ZnO films

Polycrystalline ZnO thin films codoped with Na and N were obtained by chemical bath deposition. The structural characteristic and the optical properties of the rapid thermal annealed ZnO:(Na,N) films were investigated by X-ray diffraction, scanning electron microscopy, energy dispersive spectrometer (EDS), Raman spectrum and room-temperature photoluminescence. After RTA treatment, the XRD spectra showed a continuous decrease of the full- width at half-maximum (FWHM) of the (0 0 2) diffraction peak of the ZnO:(Na,N) film. The Raman spectra revealed that the intensity of the mode around 582 cm⁻¹ increased with the increase of the RTA temperature. The PL spectra showed different trends in the UV luminescence of ZnO:(Na,N) films after RTA treatments.     

Influence of post-deposition annealing on the structural,optical and electrical properties of Li and Mg co-doped ZnO thin films deposited by sol–gel technique

Lithium (Li) and magnesium (Mg) co-doped zinc oxide (ZnO) thin films were deposited by sol–gel method using spin coating technique. The films were deposited on glass substrates and annealed at different temperatures. The effects of annealing temperature on the structural, optical and electrical properties of the deposited films were investigated using X-ray diffraction (XRD), Ultraviolet–Visible absorption spectra (UV–VIS), photoluminescence spectra (PL), X-ray photo electron spectroscopy (XPS) and Hall measurements. XRD patterns indicated that the deposited films had a polycrystalline hexagonal wurtzite structure with preferred (0 0 0 2) orientation. All films were found to exhibit a good transparency in the visible range. Analysis of the absorption edge revealed that the optical band gap energies of the films annealed at different temperatures varies between 3.49 eV and 3.69 eV. Room temperature PL spectra of the deposited films annealed at various temperatures consist of a near band edge emission and visible emission due to the electronic defects, which are related to deep level emissions, such as oxide antisite (O_Zn), interstitial zinc (Zn_i), interstitial oxygen (O_i) and zinc vacancy (V_Zn) which are generated during annealing process. The influence of annealing temperature on the chemical state of the dopants in the film was analysed by XPS spectra. Ion beam analysis (Rutherford back scattering) experiments were performed to evaluate the content of Li and Mg in the films. Hall measurements confirmed the p-type nature of the deposited films.