电感耦合等离子体质谱法测定煤矸石中微量锗和镓

建立了测定煤矸石中微量锗和镓的电感耦合等离子体质谱法。煤矸石试样经高温灰化,用硝酸-氢氟酸-高氯酸-磷酸分解,以电感耦合等离子体质谱法测定其中的锗和镓。通过在线三通加入内标元素铑,消除非质谱干扰;通过选择干扰元素的异质同位素进行定量测定,采用数学公式在线校正,消除质谱干扰。与分光光度法进行比对,锗、镓测定结果的相对偏差为-0.63%~0.28%。克服了常规化学分析方法步骤繁琐、耗时长、工作量大的不足。该法测定结果的相对标准偏差小于3%(n=6),加标回收率为97.4%~102.5%。该方法具有检出限低、快速、简便、线性范围宽、多元素同时测定等优点,分析误差满足化学分析法的要求,可用于煤矸石中锗和镓的测定。     

Reactions of a Four-Membered Borete with Carbon,Silicon, and Gallium Donor Ligands: Fused and Spiro-Type Boracycles

Donor-acceptor cyclopropanes or cyclobutanes are dipolar reagents, which are widely used in the synthesis of complex organic (hetero)cycles in ring expansion reactions. Applying this concept to boron containing heterocycles, the four-membered borete cyclo-iPr₂N-BC₁₀H₆ reacted with the carbon donor ligands 2,6-xylylisonitrile and the carbene IMes :C(NMesCH)₂ with ring expansion and ring fusion, respectively. In particular, the tetracyclic structure formed with IMes displays zwitterionic character and absorption in the visible region. In contrast to the carbene IMes, the heavier carbenoids :Si(NDippCH)₂ and :Ga(AmIm) with a two-coordinate donor atom afford spiro-type bicyclic compounds, which display four-coordinate geometry at silicon or gallium. (TD-)DFT calculations provide deeper insight into the mechanism of formation and the absorption properties of these new compounds.     

Color Point Tuning in Lu3−x−yMnxAl5−xSixO12:yCe3+ for White LEDs

A series of the solid‐solution phosphors Lu_3?x?yMn_xAl_5?xSi_xO₁₂:yCe³⁺ is synthesized by solid‐state reaction. The obtained phosphors possess the garnet structure and exhibit similar excitation properties as the phosphor Lu₃Al₅O₁₂:Ce³⁺, but with an effectively improved red component in the emission spectrum. This can be attributed to the energy transfer from Ce³⁺ to Mn²⁺. Our investigation reveals that electric dipole–quadrupole interactions dominate the energy‐transfer mechanism and that the critical distance determined by the spectral overlap method is about 9.21 Å. The color‐tunable emissions of the Lu_3?x?yMn_xAl_5?xSi_xO₁₂:yCe³⁺ phosphor as a function of Mn₃Al₂Si₃O₁₂ content are realized by continuously shifting the chromaticity coordinates from (0.354, 0.570) to (0.462, 0.494). They indicate that the obtained material may have potential application as a blue radiation‐converting phosphor for white LEDs with high‐quality white light.     

铈掺杂钇铝石榴石黄色荧光粉形貌和粒度的制备工艺调控研究进展

铈掺杂钇铝石榴石（YAG∶Ce）黄色荧光粉的形貌和粒度对其发光性能及其应用均非常重要,理想的形貌应是晶粒尺寸可控的球形。 本文总结了制备方法、工艺参数及后处理条件在YAG∶Ce荧光粉形貌调控中的研究概况,分析了各种形貌调控手段的优缺点,归纳了粉体形貌与粒度调控的主要特点。     

电感耦合等离子体发射光谱法测定钇铝石榴石中掺杂Yb(Ⅲ)离子

采用碳酸钠-硼砂(质量比1：1)做熔剂分解钇铝石榴石,并确定了熔剂的最优化条件．以电感耦合等离子体光谱法对样品中掺杂Yb(Ⅲ)离子作了定量检测考察了样品和熔剂中单个基体和混合基体对分析结果的影响．发现单个基体Y对Yb的测定有增强效应．基体A1对Yb的测定有一定的抑制作用;基体对Yb测定的干扰可通过基体匹配进行消除元素的俭出限为2μg／L,标准加入回收率为88％～100％实际样品7次检测的RSD为2．1％。本方法可以较好地满足实际样品分析的需要。     

(MN)nHm(M=Ga,In; n=1-4; m=1, 2)团簇的结构与稳定性

采用密度泛函理论(DFT)的B3LYP方法, 在6-31G**和Lanl2dz水平上分别对(MN)nHm(M=Ga, In; n=1-4; m=1, 2)进行了优化和振动频率计算. 得到了上述团簇的最稳定构型、H原子的结合能以及它们的能隙. 结果表明, (MN)nH(M=Ga, In; n=1-4)的基态构型均为双重态, (MN)nH2(M=Ga, In; n=1-4)的基态构型均为单重态; 当氢的个数为1时, 加在N原子上比加在M(M=Ga, In)原子上稳定, 如有N3单元, 那么加在N3单元两侧的构型是相同的, 且它是最稳定的; 当氢的个数为2时, 除n=1外, 分别加在两个N原子上的构型是最稳定的, 如有N3单元, 那么分别加在N3单元分离最远的两个N原子的构型是最稳定的. GaNH、(GaN)3H 和InNH的结合能和能隙都很大, 说明这些团簇都有很高的稳定性.     

(Gd,Lu)3Al5O12∶Tb3+,Eu3+透明陶瓷制备与发光性能

通过简单的化学沉淀法制备了纳米前驱体,结合真空烧结工艺,制备了一系列镥稳定钆铝石榴石{(Gd, Lu)₃Al₅O₁₂∶Tb,Eu}透明陶瓷。将透明陶瓷加工成1 mm厚的圆片,对透明陶瓷样品进行了X射线衍射、光致发光、透过率和衰减时间等表征。高温烧结过后,陶瓷样品仍保持稳定的石榴石相。选定313 nm作为透明陶瓷的激发波长,可获得最强的荧光发射。此外,通过对不同样品进行紫外可见荧光测试,获得了由绿光到红光的可调节发射。在313 nm激发,543 nm和591 nm的监测波长下,透明陶瓷样品均具有Eu³⁺的毫秒级衰减时间。     

离子注入n型GaN光致发光谱中宽黄光发射带研究

利用离子注入方法和光致发光技术系统研究了注入离子对n型GaN宽黄光发射带的影响.实验采用的注入离子为：N，O，Mg，Si和Ga，剂量分别为10¹³，10¹⁴，10¹⁵和10¹⁶/cm²，注入温度为室温.注入后的样品在900 ℃流动氮气环境下进行热退火，退火时间为10 min，并对退火前后的样品分别进行室温光致发光测量.通过实验数据的分析，独立提出了提取注入离子对晶体黄光发光特性影响的半经验模型.利用该模型导出的公式，可以确定注入的N，O，Ga，Mg和Si离子对黄光发射带的影响随注入剂量的变化关系以及该影响的相对强弱. 关键词： 氮化镓 光致发光谱 离子注入     

Ellipsometric analysis and optical absorption characterization of gallium phosphide nanoparticulate thin film

Gallium phosphide (GaP) nanoparticulate thin films were easily fabricated by colloidal suspension deposition via GaP nanoparticles dispersed in N,N-dimethylformamide. The microstructure of the film was performed by x-ray diffraction, high resolution transmission electron microscopy and field emission scanning electron microscopy. The film was further investigated by spectroscopic ellipsometry. After the model GaP+void|SiO₂ was built and an effective medium approximation was adopted, the values of the refractive index n and the extinction coefficient k were calculated for the energy range of 0.75 eV-4.0 eV using the dispersion formula in DeltaPsi2 software. The absorption coefficient of the film was calculated from its k and its energy gaps were further estimated according to the Tauc equation, which were further verified by its fluorescence spectrum measurement. The structure and optical absorption properties of the nanoparticulate films are promising for their potential applications in hybrid solar cells.