Hydrogen-induced metal-oxide interaction studied on noble metal model catalysts

Summary The effect of hydrogen reduction on the structure and catalytic properties of “thin film”and “inverse”model systems for supported metal catalysts is discussed. Thin film model catalysts were obtained by epitaxial growth of Pt and Rh nanoparticles on NaCl(001), which were coated with amorphous or crystalline supports of alumina, silica, titania, ceria and vanadia. Structural and morphological changes upon hydrogen reduction between 473 and 973 K were examined by high resolution electron microscopy. Metal-oxide interaction sets in at a specific reduction temperature and is characterized by an initial “wetting”stage, followed by alloy formation at increasing temperature, in the order VO_x< TiO_x< SiO₂< CeO_x< Al₂O₃. “Inverse”model systems were prepared by deposition of oxides on a metal substrate, e.g. VO_x/Rh and VO_x/Pd. Reduction of inverse systems at elevated temperature induces subsurface alloy formation. In contrast to common bimetallic surfaces, the stable subsurface alloys of V/Rh and V/Pd have a purely noble metal-terminated surface, with V positioned in near-surface layers. The uniform composition of the metallic surface layer excludes catalytic ensemble effects in favor of ligand effects. Activity and selectivity, e.g. for CO and CO₂methanation and for partial oxidation of ethene, are mainly controlled by the temperature of annealing or reduction. Reduction above 573 K turned out to be beneficial for the catalytic activity of the subsurface alloys, but not for the corresponding thin film systems which tend to deactivate viaparticle encapsulation.</o:p>     

Silica-supported PtSn alloy doped with Ga, In or, Tl: Characterization and catalytic behaviour in n-hexane dehydrogenation

Silica-supported trimetallic catalysts containing Pt, Sn and a group 13 metal (PtSnM, M=Ga, In, Tl) were prepared by consecutive impregnation steps from cis-[PtCl₂(PPh₃)₂] and chloride precursors. X-ray diffraction (XRD), transmission electron microscopy (TEM), selected-area electron diffraction (ED) and energy dispersive X-ray analysis (EDX) showed large platelet-like particles of PtSn_1−xM_x phases. PtSnGa catalyst with a Pt/(Sn+Ga) molar ratio of 1.72 showed a bimodal particle distribution and a Pt phase was identified. Differences in surface structures were also revealed by the performance of catalysts in the dehydrogenation of n-hexane. For PtSnIn and PtSnTl (Pt/(Sn+M) molar ratio of about 1) the dehydrogenation was favoured. In contrast, PtSnGa catalyst yielded hydrogenolysis products. Photoelectron spectra showed the Pt 4f_7/2 level at a binding energy of 70.0–71.8 eV in all cases. Moreover, the FT-IR spectra of chemisorbed CO on the PtSnGa showed a slight shift in the ν(CO) toward higher values with respect to the monometallic catalyst, pointing to an electronic effect in accordance with photoelectron spectroscopy.     

Electrochemical characterization of Ni–Fe alloy codeposition under MHD control

The nickel–iron alloy electrodeposition is affected by a superimposed magnetic field. Some previous papers [Msellak et al., Magnetohydrodynamics, 39:487–493, 2003 and Msellak et al., J Magn Magn Mat, 281:295–304, 2004] have exhibited some dramatic changes in iron amount and morphology of these deposits. As it is usual for a magnetic field up to 1 T, no charge transfer effect can be expected, and the observed modifications can be explained by the magnetohydrodynamic convection that controls the iron species flux during the electrochemical reaction. By electrochemical impedance spectroscopy and physical investigations (scanning electron microscopy, X-ray diffraction, and inductively coupled plasma), the reduction process is analyzed, the characteristic parameters of the mechanism are determined, and the magnetic field effects can be quantified. Contribution to special issue on “Magnetic field effects in Electrochemistry”.     

Formation of PdNiZn thin film at oil‐water interface: XPS study and application as Suzuki‐Miyaura catalyst

Nanosheet of PdNiZn and nanosphere of PdNiZn/reduced‐graphene oxide (RGO) with sub‐3 nm spheres have been successfully synthesized through a facile oil‐water interfacial strategy. The morphology and composition of the films were determined by X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy dispersive analysis of X‐ray (EDAX) and elemental mapping. In the present study, we have developed a method to minimize the usage of precious Pd element. Due to the special structure and intermetallic synergies, the PdNiZn and PdNiZn/RGO nanoalloys exhibited enhanced catalytic activity and durability relative to Pd nanoparticles in Suzuki‐Miyaura C‐C cross‐coupling reaction. Compared to classical cross‐coupling reactions, this method has the advantages of a green solvent, short reaction times, low catalyst loading, high yields and reusability of the catalysts.     

Influence of aspect ratio and anisotropy distribution in ordered CoNi nanowire arrays

The size effects on magnetic properties of nanowires arrays were studied varying the nanowires diameter and maintaining the same periodicity among them, for two different nominal compositions of Co and Ni in the alloy form. The competition among magnetocrystalline and shape anisotropies changes drastically from smallest to biggest diameters altering the easy axis direction. In the case of 75% of Co in alloy, experimental values of the effective anisotropy constant (K_eff) vary from positive to negative depending on the diameter, which means a reversal of the easy axis direction. For 50% of Co the shape anisotropy dominates over the magnetocrystalline for all studied diameters.     

Dislocation driven chromium precipitation in Fe-9Cr binary alloy: a positron lifetime study

The influence of initial heat treatment on anomalous Cr precipitation within high temperature solubility region of the Fe–9Cr alloy has been investigated using positron lifetime studies. Air-quenched samples with pre-existing dislocations exhibited a distinct annealing stage in positron lifetime between 800 and 1100?K corresponding to Cr-precipitation. During this stage, Transmission Electron Microscopy showed fine precipitates of average size 4 nm, dispersed throughout the sample and from Energy-dispersive X-ray spectroscopy (EDS) analysis they are found to be Cr-enriched. The presence of dislocations is found to be responsible for Cr precipitation.     

Role of compositional changes on thermal,magnetic,and mechanical properties of Fe-P-C-based amorphous alloys

This work aimed to tune the comprehensive properties of Fe-P-C-based amorphous system through investigating the role of microalloying process on the crystallization behavior,glass forming ability(GFA),soft magnetic features,and mechanical properties.Considering minor addition of elements into the system,it was found that the simultaneous microalloying of Ni and Co leads to the highest GFA,which was due to the optimization of compositional heterogeneity and creation of near-eutectic composition.Moreover,the FeCoNiCuPC amorphous alloy exhibited the best anelastic/viscoplastic behavior under the nanoindentation test,which was owing to the intensified structural fluctuations in the system.However,the improved plasticity by the extra Cu addition comes at the expense of magnetic properties,so that the saturation magnetization of this alloying system is significantly decreased compared to the FeCoPC amorphous alloy with the highest soft magnetic properties.In total,the results indicated that a combination of added elemental constitutes,i.e.,Fe69Co5Ni5Cu1P13C7 composition,provides an optimized state for the comprehensive properties in the alloying system.     

A study on the phase transformation behaviour of Cu-20wt.Sn alloy produced using powder metallurgy method: Experimental and molecular dynamics modelling

In this study, Cu-20wt.Sn alloy was produced by powder metallurgy (PM) method by using high purity element powders. The phases in the microstructure of the produced alloy were determined by XRD study. The phase transformation behaviour of the alloy was investigated by DSC and modelling method. Moreover, the Cu-20wt.Sn alloy system was modelled with molecular dynamics (MD) simulation based on modified Embedded Atom Method (MEAM). The radial distribution function (RDF) was calculated to determine the structural properties of system during the phase transformations. The experimental results showed that the transformation ($\alpha +\delta$) → ($\alpha +\gamma$) occur at temperature above 500°C. The simulation results showed that the phase transformation $\alpha +\delta \to \alpha +\gamma$ occurs at 550°C temperature. Our simulation results are in reasonable agreement with the experimental data.     

Effect of transition elements on dispersoid formation and elevated-temperature mechanical properties in 6082 aluminum alloy

ABSTRACT

The effect of transition elements, specifically Mn, Cr, V, and Mo, on dispersoid formation and mechanical properties in 6082 aluminum alloy was studied. The elevated-temperature mechanical properties were evaluated based on the compressive yield strength and creep resistance. The results indicated that the addition of Mn to the 6082 alloy resulted in the formation of a large number of the thermally stable α-Al(MnFe)Si dispersoids, thereby significantly improving the elevated-temperature mechanical properties of the alloy. Subsequent additions of Cr, V, and Mo increased the amount of Mn-bearing intermetallic phases, which decreased the supersaturation levels of Mn and Si in the α-Al, and consequently decreased the volume fraction of the dispersoids. The alloys containing Cr, V, and Mo exhibited similar yield strengths at 300°C and higher yield strengths at room temperature compared to the alloy containing only Mn. The size effect of the smaller dispersoids containing Cr, V, and Mo together with the solid-solution hardening of these elements could balance out the strength decrease resulting from the decreased volume fraction of the dispersoids. The additions of Cr, V, and Mo significantly increased the creep resistance of the Mn-containing 6082 alloy. Vanadium induced the highest creep resistance followed by Cr and Mo. Solute atoms of these elements with low diffusivity in the aluminum matrix contributed significantly to increasing the creep resistance at 300°C.