Strategies for hydrogen storage in metal--organic frameworks

Increased attention is being focused on metal-organic frameworks as candidates for hydrogen storage materials. This is a result of their many favorable attributes, such as high porosity, reproducible and facile syntheses, amenability to scale-up, and chemical modification for targeting desired properties. A discussion of several strategies aimed at improving hydrogen uptake in these materials is presented. These strategies include the optimization of pore size and adsorption energy by linker modification, impregnation, catenation, and the inclusion of open metal sites and lighter metals.     

Inorganic-Organic Hybrid Polymers from the Polymerisation of Methacrylate-Substituted Oxotantalum Clusters with Methylmethacrylate: A Thermomechanical and Spectroscopic Study

New inorganic-organic hybrid materials were prepared by free-radical polymerization of methyl methacrylate (MMA) with methacrylate-substituted oxotantalum cluster [Ta₄O₄(OEt)₈(OMc)₄] and their properties evaluated. The cluster was prepared by the reaction of the parent alkoxide with methacrylic acid. Samples of the hybrid materials were produced with Ta-cluster to methyl methacrylate in the ratios of 1:50 and 1:100 and were characterized by thermal and spectroscopic techniques. The glass transition temperatures of the hybrid materials are shifted to higher temperatures than pure PMMA as a result of cross-linking of the polymer by the oxotantalum clusters. The increase in T_g is also observed from the dynamic mechanical analysis (DMA). Evidence of crosslinking between the Ta-cluster and PMMA is obtained from infrared spectroscopic study. Surface studies performed by X-ray photoelectron spectroscopy (XPS) provide information about the atomic concentrations of the surface and indicate tantalum bonded to oxygen.     

Synthesis and characterization of new strontium 4-carboxyphenylphosphonates

Several new strontium 4-carboxyphenylphosphonates, i.e., two modifications of Sr(HOOCC₆H₄PO₃H)₂, SrH(OOCC₆H₄PO₃)·H₂O, Sr₃(OOCC₆H₄PO₃)₂·4H₂O and Sr₃(OOCC₆H₄PO₃)₂·5.7H₂O were prepared and characterized by elemental analysis, thermogravimetry, X-ray powder diffraction and infrared spectroscopy. It was found that the compositions of these compounds depend on the acidity of the reaction medium. In addition, the presented compounds are interconvertible in dependence on pH. The position of the acid hydrogen atom in SrH(OOCC₆H₄PO₃)·H₂O was determined from the IR spectra of the studied compounds.The structure of the β modification of Sr(HOOCC₆H₄PO₃H)₂ was solved from its X-ray powder diffraction pattern using an ab initio method (the FOX program) with subsequent Rietveld refinement in the FULLPROF program. The compound is monoclinic, with the space group P2₁/c (No. 14), a=49.88(2), b=7.867(2), c=5.602(3) Å, β=128.68(2)°, and Z=4. It has a one-dimensional structure with an inorganic part built of SrO₈ distorted tetragonal antiprisms.     

Cobalt Ion Incorporation into Periodic Mesoporous Organosilica Materials Synthesized by Co-condensation of 1,2-Bistrimethoxysilylethane with 3-Glycidoxypropyltriethoxysilane

Bifunctional periodic mesoporous organosilica materials with and without cobalt ion incorporation were synthesized by co-condensation of 1,2-bistrimethoxysilylethane (BTME) with 3-glycidoxypropyltriethoxysilane (GPTS) in the presence of cetyltrimethylammonium bromide. Nitrogen gas adsorption on samples with varying ratios of BTME:GPTS revealed that increasing the amount of GPTS affects pore size, surface area and pore volume as well as shapes of the isotherms and hysteresis loops. The hysteresis loops of the Type IV isotherms obtained for GPTS-modified ethane silica materials (without cobalt ion) change from Type H3 to Type H4 with increasing GPTS content. There is a tendency for pore sizes to change from mesopore to micropore when the amount of GPTS is increased. Isotherms of cobalt ion incorporated GPTS-modified ethane silica materials change from Type IV to Type I with increasing GPTS content. The surface area, pore volume and pore diameter decrease with increasing loading of GPTS as well as after cobalt ion incorporation. Thermogravimetric analysis and differential thermal analysis show that the surfactant is removed by solvent extraction. Cobalt ion incorporation is confirmed by powder X-ray diffraction and Raman spectroscopy.     

Chemical Modification of Silica Gels

Highly porous pure and polyethyleneglycol (PEG)-doped silica gels have been prepared from tetraethyl orthosilicate (TEOS) in ethanol using NH₄OH base-catalysis. Addition of PEG to the SiO₂-system increases the average particle size and most frequent pore diameter of the resultant gels while their total surface area decreases. The viscosity of the sol increases with PEG concentration and passes through a maximum with increasing molecular weight at PEG 200. Results obtained indicate a definite interaction of the polymer with SiO₂ and that this interaction is not as a result of direct formation of Si– O– C linkage, but is more likely to be due to hydrogen bonding between the hydrated PEG and the Si– O– Si network. Structure-process correlations are considered.     

Methane conversion to C2 hydrocarbons in solid electrolyte membrane reactors

Solid electrolyte membrane reactors (SEMRs) have been used to both study and influence catalytic reaction rates. Methane coupling is the reaction most thoroughly and intensively studied in these membrane reactors. In the last 20 years, oxygen ion (O²⁻), proton (H⁺) and mixed (O²⁻-e⁻, H⁺-e⁻) conducting membranes have been tested in order to maximize the conversion of methane to C₂ compounds. The present review contains the fundamental operating principles of the various SEMR types and their applications in this reaction. The difficulties that should be overcome in order to promote this SEMR process to an industrial scale are discussed.     

Flow injection spectrophotometric method for chloride determination in natural waters using Hg(SCN)(2) immobilized in epoxy resin

A flow injection (FI) spectrophotometric method was proposed for the determination of chloride ion in natural waters. The determination of chloride was carried out by reaction with Hg(SCN)₂ immobilized in an epoxy resin bead in a solid-phase reactor (SPR) and the thiocyanate ions released were determined spectrophotometrically at 480 nm after complexing reaction with Fe(III). The analytical curve for chloride was linear in the concentration range from 5.6 × 10⁻⁵ to 2.2 × 10⁻⁴ mol l⁻¹ with a detection limit of 1.4 × 10⁻⁵ mol l⁻¹. The relative standard deviation (R.S.D.) was 2.2% for a solution containing 2.2 × 10⁻⁴ mol l⁻¹ (n = 10). The simple manifold allows a routine analytical frequency of 100 determinations per hour. The main advantage of the developed method is the 400% reduction of the Hg waste solution generated when compared to conventional methods for chloride determination based on the same spectrophotometric reaction.     

Gas permeation of porous organic/inorganic hybrid membranes

Selective gas permeation of porous organic/inorganic hybrid membranes via sol-gel route and its thermal stability are described. Separation performance of the hybrid membrane was improved compared with porous membranes governed by the Knudsen flow, and gas permeability was still much higher than that through nonporous membranes. Additionally, it was shown that these membranes were applicable at higher temperatures than organic membranes.SEM observation demonstrated that the thin membrane was crack-free. Nitrogen physisorption isotherms showed the pore size was in the range of nanometers. Gas permeability through this membrane including phenyl group was in the range of 10^–8 [cc(STP) cm/(cm² s cmHg)] at 25°C. The ratios of O₂/N₂ and CO₂/N₂ were 1.5 and 6.0, respectively, showing the permeation was not governed by the Knudsen flow. The permeability decreased as the temperature increased. Furthermore, the specific affinity between gas molecules and surface was observed not only in the permeation data of the hybrid membranes but in the physisorption data. These results suggested that the gas permeation through the hybrid membrane was governed by the surface flow mechanism.Thermal analysis indicated that these functional groups were still stable at higher temperatures. The phenyl group especially remained undamaged even at 400°C.     

催化裂化装置沉降器内结焦的微观结构及其生长过程的分析

对催化裂化装置（FCCU）沉降器内结焦的微观结构进行分析，结果表明，结焦形态主要有4种，丝状焦、滴状焦、块状焦和颗粒状焦。各种结焦形态的成因机理不同，微观结构及生长过程也不同。丝状焦是由铁、镍金属元素催化烃类气体，以及易生焦物发生脱氢缩合反应，以催化剂颗粒形成结焦中心并逐渐长大形成细丝状焦炭；滴状焦是由稠环芳烃脱氢缩合反应而生成，高沸点未汽化油滴黏附在催化剂颗粒或器壁表面形成“焦核”，即由重芳烃、胶质、沥青质脱氢缩合反应和二烯烃聚合环化反应而生成的；块状焦是高沸点未汽化油滴相互溶解后，再脱氢缩合反应或聚合环化反应而形成的结焦；颗粒状焦是油气在气相中脱氢缩合反应或聚合环化反应形成的微小结焦颗粒相互团聚形成的颗粒簇。催化裂化装置沉降器内的结焦一般是上述几种结焦过程的组合，是催化结焦和非催化结焦过程共同作用的结果。