Multipeak fitting analysis of Raman spectra on DLCH film

The hydrogenated diamond‐like carbon (DLCH) film with 1‐µm thickness is deposited by direct hydrocarbon gas ion beam method on silicon wafer and annealed at 400 °C. Detailed Raman spectra feature are fitted from nine sets of different peak fitting functions, including Gaussian, Lorentzian and Breit‐Wigner‐Fano (BWF) functions. These fitting results obtained from a two‐peak combination show some specific variances on the G peak position, FWHM_G and I_D/I_G ratio for as‐deposited and as‐annealed DLCH films. The most popular two‐peak fitting method with full Gaussian function tends to exhibit a higher ratio of the G peak position shift and higher I_D/I_G ratio than others fitting methods, the drastic difference among the most popular G (G) & G (D) and B (G) & L (D) schemes also have brought out in I_D/I_G ratio. However, for a more complex four‐peak Gaussian function fitting Raman spectra, the I_D/I_G ratio is close to that of a two‐peak fitting function with a mixture functions of BWF (G) and L (D). Furthermore, a series of systematic peak fitting procedures and comparisons of Raman spectra have been discussed in this study. Copyright © 2009 John Wiley & Sons, Ltd.     

基于Marangoni界面效应的数控化学抛光去除函数的研究

 利用基于Marangoni界面效应对化学抛光去除函数的理论及实验进行研究,提出采用湿法化学抛光（刻蚀）方法为大口径高精度光学元件的加工提供新的解决途径。介绍了Marangoni界面效应及其验证实验,运用WYKO轮廓仪对熔石英基片局域刻蚀前后的粗糙度进行检测,结果表明,粗糙度基本无变化,刻蚀前后粗糙度分别为0.72 nm和0.71 nm。基于Preston假设, 建立了数控化学抛光理论模型,运用WYKO干涉仪观察实验现象可知,化学抛光刻蚀曲线基本上成平底陡峭的去除函数曲线,小磨头抛光是倒置的仿高斯函数曲线。     

基于双向偏振态激光诱导荧光方法的离子速度分布函数测量

为了评估利用发散磁场构型双电层效应的紧凑式螺旋波等离子体推力器的离子加速效果,探索了一种双向偏振态激光诱导荧光测量方法来对螺旋波等离子体源近出口端的离子速度分布函数进行测量。实验中采用Ar作为螺旋波等离子体源工质,中心波长为611.662 nm的激光以轴向方式注入等离子体,以激励一价Ar离子获得波长为461.086 nm的诱导荧光光谱。为了消除磁化等离子体中逆塞曼效应对激光诱导荧光光谱带来的分裂影响,通过四分之一波片将入射激光分别调制为左旋和右旋圆偏振态,并对其诱导光谱进行了分别测量,结果发现不同磁场强度下两次测量结果的偏移值与理论高度吻合,证明了双向偏振态激光诱导荧光测量方法的理论可行性。进一步,采用高斯型滤波器反卷积算法从测量光谱中去除自然展宽和能量饱和效应,再通过对两次相反偏振态测量结果进行平移处理消除逆塞曼效应,从而分离得到实际的多普勒效应。测量了射频能量600 W,不同轴向位置、磁场大小以及气体压力下的螺旋波Ar等离子体激光诱导荧光光谱,结果表明在该实验条件下离子并没有因双电层效应而达到期望值的加速效果,离子速度的形成可能只是一种磁约束作用下的双极电场所导致,并不能产生好的推力性能。     

A Criterion for Stability of Synchronization and Application to Coupled Chua＇s Systems

We investigate synchronization in an array network of nearest-neighbor coupled chaotic oscillators. By using of the Lyapunov stability theory and matrix theory, a criterion for stability of complete synchronization is deduced. Meanwhile, an estimate of the critical coupling strength is obtained to ensure achieving chaos synchronization. As an example application, a model of coupled Chua＇s circuits with linearly bidirectional coupling is studied to verify the validity of the criterion.     

正常金属-分子量子点-超导耦合系统的介观输运研究

运用非平衡格林函数理论、正则变换以及BCS平均场理论研究了正常金属-分子量子点-超导耦合系统（N-MQD-S）的介观输运,得到了系统的电流公式并选择适当的参数进行了数值计算。数值计算结果表明：电声子耦合强度 与线宽函数 对系统的输运行为有较大影响。当 增大时,由声子辅助隧穿所产生的共振峰将高于分子量子点自身能级产生的共振峰;当线宽函数 增大时,在Andreev反射共振峰的两侧将出现新的边峰。     

Characteristics of xenon-lamp pumped pyrromethene 567-doped dye laser based on polymethylmethacrylater

The solid-state medium containing pyrromethene 567 (PM567) in a polymethylmethacrylate polymer host is shown to lase under the flash lamp excitation. The experimental setup is an ordinary industrial product without special design. The bulk transmission losses, the output energy, and the other lasing properties are compared. The medium with the lowest transmission loss, measured to be 0.392 %/cm at 633 nm, gives a laser output of 130 mJ with a slope efficiency of 0.082%.     

The beam-based calibration of an X-ray pinhole camera at SSRF

A pinhole camera for imaging X-ray synchrotron radiation from a dipole magnet is now in operation at the Shanghai Synchrotron Radiation Facility (SSRF) storage ring. The electron beam size is derived by unfolding the radiation image and the point spread function (PSF) with deconvolution techniques. The performance of the pinhole is determined by the accuracy of the PSF measurement. This article will focus on a beam-based calibration scheme to measure the PSF system by varying the beam images with different quadrupole settings and fitting them with the corresponding theoretical beam sizes. Applying this method at SSRF, the PSF value of the pinhole is revised from 37 to 44 μm. The deviation in beam size between the theoretical value and the measured value is minimized to 4% after calibration. This optimization allows us to observe the horizontal disturbance due to injection down to as small as 0.5 μm.     

超燃冲压发动机等截面隔离段中流动的LBM模拟

采用耦合的双分布函数格子Boltzmann方法模拟超燃冲压发动机中隔离段的流动.计算结果反映了隔离段内流场的基本结构,表明LBM在隔离段的模拟中是-种具有潜力的数值计算方法.