Three-dimensional elastostatic solutions for transversely isotropic functionally graded material plates containing elastic inclusion

Based on the generalized England-Spencer plate theory, the equilibrium of a transversely isotropic functionally graded plate containing an elastic inclusion is studied. The general solutions of the governing equations are expressed by four analytic functions α(ζ), β(ζ), φ(ζ), and ψ(ζ) when no transverse forces are acting on the surfaces of the plate. Axisymmetric problems of a functionally graded circular plate and an infinite func-tionally graded plate containing a circular hole subject to loads applied on the cylindrical boundaries of the plate are firstly investigated. On this basis, the three-dimensional (3D) elasticity solutions are then obtained for a functionally graded infinite plate containing an elastic circular inclusion. When the material is degenerated into the homogeneous one, the present elasticity solutions are exactly the same as the ones obtained based on the plane stress elasticity, thus validating the present analysis in a certain sense.     

Fabrication of Compositional‐Gradient Biodegradable Polymeric Films Showing Self‐Bending Deformation

A compositional graded film of poly(ε‐caprolactone) (PCL) with 4,4′‐thiodiphenol (TDP), in the film thickness direction, was fabricated by self‐diffusing of TDP in the PCL melt. We found out the self‐bending deformation of the gradient film, which bent into a rolled‐up shape by itself. The initial shape of the film was flat when the sample was quenched from the melt. Upon the fast crystallization of PCL, the gradient film bent to the side with low TDP content. Then, after PCL crystallized the film bent to the opposite direction, that is, to the side with high TDP content. This bending to the TDP rich region was induced by not only the crystallization of PCL but also mass transfer due to the diffusion of TDP from TDP rich region to poor region.

     

Transverse surface waves in a layered structure with a functionally graded piezoelectric substrate and a hard dielectric layer

As to an ideally layered structure with a functionally graded piezoelectric substrate (material parameters change continuously along the thickness direction) and a hard dielectric layer, the existence and propagation behavior of transverse surface waves is studied by analytical technique. The dispersion equations for the existence of the transverse surface waves with respect to phase velocity are obtained for electrically open and short circuit conditions, respectively. A detailed investigation of the effect of gradient coefficient on dispersion relation, electromechanical coupling factor and penetration depth is carried out. It is found by numerical examples that adjusting gradient coefficient makes the electromechanical coupling factor of the transverse surface waves achieve quite high values at some appropriate ratio values of the layer thickness to the wavelength, and at the same time, the penetration depth can be reduced to the same order as the wavelength.     

SCATTERING OF THE HARMONIC STRESS WAVE BY CRACKS IN FUNCTIONALLY GRADED PIEZOELECTRIC MATERIALS

The present paper considers the scattering of the time harmonic stress wave by a single crack and two collinear cracks in functionally graded piezoelectric material （FGPM）. It is assumed that the properties of the FGPM vary continuously as an exponential function. By using the Fourier transform and defining the jumps of displacements and electric potential components across the crack surface as the unknown functions, two pairs of dual integral equations are derived. To solve the dual integral equations, the jumps of the displacement and electric potential components across the crack surface are expanded in a series of Jacobi polynomials. Numerical examples are provided to show the influences of material properties on the dynamic stress and the electric displacement intensity factors.     

Mechanical stability of functionally graded stiffened cylindrical shells

This paper is concerned with the elastic buckling of stiffened cylindrical shells by rings and stringers made of functionally graded materials subjected to axial compression loading. The shell properties are assumed to vary continuously through the thickness direction. Fundamental relations, the equilibrium and stability equations are derived using the Sander’s assumption. Resulting equations are employed to obtain the closed-form solution for the critical buckling loads. The results show that the inhomogeneity parameter and geometry of shell significantly affect the critical buckling loads. The analytical results are compared and validated using the finite element method.     

Compact DG modules and Gorenstein DG algebras

When the base connected cochain DG algebra is cohomologically bounded, it is proved that the difference between the amplitude of a compact DG module and that of the DG algebra is just the projective dimension of that module. This yields the unboundedness of the cohomology of non-trivial regular DG algebras. When A is a regular DG algebra such that H(A) is a Koszul graded algebra, H(A) is proved to have the finite global dimension. And we give an example to illustrate that the global dimension of H(A) may be infinite, if the condition that H(A) is Koszul is weakened to the condition that A is a Koszul DG algebra. For a general regular DG algebra A, we give some equivalent conditions for the Gorensteiness. For a finite connected DG algebra A, we prove that D^c(A) and D^c(A ^op) admit Auslander-Reiten triangles if and only if A and A ^op are Gorenstein DG algebras. When A is a non-trivial regular DG algebra such that H(A) is locally finite, D^c(A) does not admit Auslander-Reiten triangles. We turn to study the existence of Auslander-Reiten triangles in D_lf^b(A) and D_lf^b (A ^op) instead, when A is a regular DG algebra. This work was supported by the National Natural Science Foundation of China (Grant No. 10731070) and the Doctorate Foundation of Ministry of Education of China (Grant No. 20060246003)     

On the structure of graded <Emphasis Type="Italic">λ</Emphasis>-Hopf algebras

Let G be an abelian group, B the G-graded λ-Hopf algebra with A being a bicharacter on G. By introducing some new twisted algebras （coalgebras）, we investigate the basic properties of the graded antipode and the structure for B. We also prove that a G-graded λ-Hopf algebra can be embedded in a usual Hopf algebra. As an application, it is given that if G is a finite abelian group then the graded antipode of a finite dimensional G-graded A-Hopf algebra is invertible.     

Analysis of Functionally Graded Piezoelectric Cylinders in a Hygrothermal Environment

This paper presents an analytical solution for the interaction of electric potentials, electric displacement, elastic deformations, and describes hygrothermal effect responses in hollow and solid cylinders, subjected to mechanical load and electric potential. Exact solutions for displacement, stresses and electric potentials in functionally graded piezoelectric material are determined using the infinitesimal theory. The material properties coefficients of the present cylinder are assumed to be graded in the radial direction by a power law distribution. Numerical examples display the significant of influence of material inhomogeneity. It is interesting to note that selecting a specific value of inhomogeneity parameter can optimize the piezoelectric hollow and solid cylinders responses, which will be of particular importance in modern engineering designs.     

A New Higher Order Shear Deformation Model for Static Behavior of Functionally Graded Plates

In this paper, a new displacement based high-order shear deformation theory is introduced for the static response of functionally graded plate. Unlike any other theory, the number of unknown functions involved is only four, as against five in case of other shear deformation theories. The theory presented is variationally consistent, has strong similarity with classical plate theory in many aspects, does not require shear correction factor, and gives rise to transverse shear stress variation such that the transverse shear stresses vary parabolically across the thickness satisfying shear stress free surface conditions. The mechanical properties of the plate are assumed to vary continuously in the thickness direction by a simple power-law distribution in terms of the volume fractions of the constituents. Numerical illustrations concerned flexural behavior of FG plates with Metal-Ceramic composition. Parametric studies are performed for varying ceramic volume fraction, volume fraction profiles, aspect ratios and length to thickness ratios. The validity of the present theory is investigated by comparing some of the present results with those of the classical, the first-order and the other higher-order theories. It can be concluded that the proposed theory is accurate and simple in solving the static behavior of functionally graded plates.     

多维梯度折射率介质内辐射传递的扩散近似

推导多维梯度折射率介质内稳态辐射传递的扩散近似方程.使用有限元法对扩散近似进行离散和求解,利用两个二维半透明介质的稳态辐射传递问题验证该扩散近似的精度及适用性.算例考虑介质为均匀折射率及梯度折射率两种情况.利用扩散近似分别求解辐射平衡时的边界热流、介质内温度场分布,并与辐射传递方程的求解结果进行对比分析.结果表明:介质折射率变化、散射特性、光学厚度及散射反照率均直接影响扩散近似的精度;在光学厚及强散射条件下,该扩散近似可以作为一种快速算法应用于梯度折射率介质稳态辐射传递的求解.