用于红外激光防护的高开关率VO2薄膜

采用反应离子束溅射和后退火处理技术在石英玻璃基底上制备了具有纳米粒子的二氧化钒(VO₂)薄膜. 该薄膜具有半导体-金属相变特性,在3 μm处的开关率达到76.6%。 热致相变实验结果给出了准确的最佳退火温度为465 ℃. 仿真、热致相变和光致相变实验都显示VO₂薄膜在红外波段具有很高的光学开关特性. 光电池防护实验结果显示VO₂薄膜将硅光电池的抗干扰能力提升了2.6倍, 证明了VO₂在激光防护中的适用性. 采用连续可调节系统研究得到VO₂在室温条件下的相变阈值功率密度为4.35 W/cm², 损伤阈值功率密度为404 W/cm²。 低相变阈值和高损伤阈值都进一步证明VO₂薄膜适用于激光防护系统。本实验制备的VO₂薄膜在光开关、光电存储器、智能窗等方面也具有广泛的应用价值.     

独立双池受激布里渊散射系统中能量转换效率的研究

利用瞬态包含泵浦抽空的SBS理论模型对独立双池受激布里渊散射系统进行数值模拟，给出了能量转换效率随泵浦功率密度的变化规律。实验验证，理论值与实验结果相吻合。     

利用时空混沌同步进行数字加密通信

提出一种利用时空混沌同步的计算机网络数字加密通信方案,并用软件实现了语音双工实时密码通信.在该方案中,收、发端两个单向耦合映射格点(OCOML)系统被同一混沌信号所驱动而达到同步,其时空混沌输出信号分别用作加密和解密的密钥序列,OCOML的耦合参数为系统的主密钥.系统的主要优点是传输效率高,便于用软件实现实时通信,且通信的安全性获得了改善. 关键词： 时空混沌同步 密码系统 传输效率     

有机层界面对双层有机发光二极管复合效率的影响

建立了双层有机发光二极管中载流子在有机层界面复合的无序跳跃理论模型.由于有机分子材料的空间及能带结构的无序性，采用刚体模型处理有机层界面问题是不恰当的，而采用无序跳跃模型比较合理.复合效率及复合电流由载流子跳跃距离、有机层界面的有效势垒高度及该界面处的电场强度分布所决定：在双层器件ITO/α-NPD/Alq₃/Al中，当所加电压小于19.5V时，复合效率随着载流子跳跃距离的增加而增加，而大于19.5V时，复合效率随着其距离的增加而减少；复合效率随着有机层界面有效势垒高度的增加而增加； 关键词： 有机层界面 双层有机发光二极管 复合效率 有效势垒高度 无序跳跃模型     

Reverse fragment based drug discovery approach via simple estimation of fragment contributions

1. Download : Download high-res image (110KB)
2. Download : Download full-size image

     

Classical Backfitting for Smooth-Backfitting Additive Models

Smooth backfitting has been shown to have better theoretical properties than classical backfitting for fitting additive models based on local linear regression. In this article, we show that the smooth backfitting procedure in the local linear case can be alternatively performed as a classical backfitting procedure with a different type of smoother matrices. These smoother matrices are symmetric and shrinking and some established results in the literature are readily applicable. The connections allow the smooth backfitting algorithm to be implemented in a much simplified way, give new insights on the differences between the two approaches in the literature, and provide an extension to local polynomial regression. The connections also give rise to a new estimator at data points. Asymptotic properties of general local polynomial smooth backfitting estimates are investigated, allowing for different orders of local polynomials and different bandwidths. Cases of oracle efficiency are discussed. Computer-generated simulations are conducted to demonstrate finite sample behaviors of the methodology and a real data example is given for illustration. Supplementary materials for this article are available online.     

Real‐Time Measurement of the Size Distribution of Diesel Exhaust Particles using a Portable 4‐stage Electrical Low Pressure Impactor

For this study, a 4 stage electrical low pressure impactor was designed to measure the real‐time size distribution of diesel particulate matter (DPM). For the performance evaluation, sodium chloride (NaCl) particles and dioctyl sebacate (DOS) particles were used. After evaluating the collection efficiency of each stage of the impactor, the size distributions of test particles were estimated using electrical current data and their inversion algorithm, and this was found to agree with the results obtained by a scanning mobility particle sizer (SMPS). For measurement of DPM, a common‐rail direct injection (CRDI) diesel engine, for engine speeds of 1,200 rpm and 1,500 rpm at 2.7 kgf·m, was used. Therefore, it was found that the size distribution of the DPM could be easily obtained, with the currents measured by the impactor and the data inversion algorithm, in less than 5 seconds. Furthermore, the effective density of the DPM could be obtained using the calculated results and the SMPS data.     

Study of ozone generation in an atmospheric dielectric barrier discharge reactor

Ozone (O₃) generation in a dielectric barrier discharge (DBD) reactor driven by a pulsed power supply was investigated at atmospheric pressure and room temperature. An O₃ generation efficiency model is established in which discharge power, O₂ concentration, gas flow rate, and volume of the discharge space are included. Constants in the O₃ generation efficiency model were obtained by fitting the model with experiment results. O₃ concentration can be simply calculated from the energy density and initial O₂ concentration. Comparison on O₃ concentrations from calculation with references is given.     

光生物节律因子计算模型的研究

通过实验测量额头温度拟合光生物节律因子-额温差曲线,对现有评价光生物效应作用大小的BioEq模型和CLA模型的计算结果进行分析比较.利用不同图片LCD屏幕的光谱计算节律因子,发现两种模型对于绿色波段的光抑制较强,而对红色波段的光则与实际不相符.通过对九种不同颜色的LED光源测试额头温度,比较模型计算结果与实际光生物效应的作用,发现光生物节律因子与生理体征变化线性递增,其中对BioEq模型的直线拟合相关度达到0.95.     

Chemical properties of water-soluble,nonionic azo compounds as initiators for emulsion polymerization

Four kinds of water-soluble, nonionic azo compounds were studied in terms of their decomposition rate and initiator efficiency in radical polymerization, and then used for emulsion polymerization. They had relatively low initiator efficiency from 0.09 to 0.46. It was attributed to the susceptibility to a cage effect, depending on their molecular size and hydrophobicity. Four azo compounds initiated emulsion polymerization but nonionic latex particles were not obtained unexpectedly. Methanol-containing medium results in the formation of a bimodal particle size distribution as well as a bimodal molecular weight distribution. © 1996 John Wiley & Sons, Inc.