Advances in two-dimensional GC with glass capillary columns

A versatile two-dimensional gas chromatograph is described, consisting of 2 separate ovens, one intermediate trap, an auxiliary inlet, and the necessary hardware to effect off-line switching according to the principle of Deans. The unit has been designed for use with high resolution glass capillary columns. The performance of individual instrumental components was critically evaluated. Results showed that low dead volume glass to metal connections were required in the manifold and detector lines to minimize extra-column effects. The mass of the intermediate trap must be low to allow rapid heating. Operational parameters are discussed and examples of some applications are shown.     

The detection of formaldehyde in textiles using interdigitated microelectrode array diffusion layer titration with electrogenerated hypobromite

An interdigitated microelectrode array (IDA) was applied to the determination of formaldehyde released from textiles produced in industry. The proposed method is based on formaldehyde reaction with hypobromite which is formed in weakly basic media by control current electrooxidation of bromide on the generator segment of the IDA array. The unreacted hypobromite diffuses through the gap between individually polarisable IDA segments and it is amperometrically detected on the collector segment of the IDA. The efficiency of this nonconvective transfer process in the absence of formaldehyde was substantially higher (78%) in comparison with that when using the rotating ring disc electrode. The influence of the added formaldehyde on the transfer process can be utilised to develop a simple and sensitive analytical procedure for formaldehyde detection with a detection limit of 4×10⁻⁶ mol dm⁻³.     

Comparison of slurry sampling and microwave-assisted digestion for calcium, magnesium, iron, copper and zinc determination in fish tissue samples by flame atomic absorption spectrometry

The development of a slurry sampling method for the determination of calcium, copper, iron, magnesium and zinc in fish tissue samples by flame atomic absorption spectrometry is described. In comparison with microwave-assisted digestion, the proposed method is simple, requires short time and eliminates total sample dissolution before analysis. Suspension medium was optimized for each analyte to obtain quantitative recoveries from fish tissue samples without matrix interferences. Nevertheless, iron recoveries higher than 46% were not found. Treatment of samples slurried in nitric acid by microwave irradiation for 15-30 s at 75-285 W permitted to achieve efficient recoveries for calcium, iron, magnesium and zinc. Further improvement in the matrix effects for iron determination was accomplished by the use of an additional step of short microwave-assisted suspension treatment. However, standard addition method was required for calcium and copper determination, being necessary hydrochloric acid as suspension medium for the last one. Although copper could not be determined in the certified reference material using microwave-assisted digestion, the accuracy of the slurry sampling method was verified for all the investigated analytes. Detection limits were 22.8 ± 8.0, 0.884 ± 0.092, 5.07 ± 0.76, 35.5 ± 0.7 and 1.17 ± 0.04 μg g⁻¹ for calcium, copper, iron, magnesium and zinc, respectively. The standard deviations obtained using slurry sampling method and microwave-assisted digestion were not significantly different, and the mean relative standard deviation of the over-all method (n = 3) of the slurry sampling method for different concentration levels was below 12%.     

Determination of daidzein and genistein in soybean foods by automated on-line in-tube solid-phase microextraction coupled to high-performance liquid chromatography

An automated on-line method for the determination of the isoflavones, daidzein and genistein, was developed using in-tube solid-phase microextraction coupled to high-performance liquid chromatography (in-tube SPME-HPLC). In-tube SPME is a new extraction technique for organic compounds in aqueous samples, in which analytes are extracted from the sample directly into an open tubular capillary by repeated draw/eject cycles of sample solution. Daidzein, genistein and their glucosides tested in this study were clearly separated within 8 min by HPLC using an XDB-C8 column with diode array detection. In order to optimize the extraction of these compounds, several in-tube SPME parameters were examined. The glucosides daidzin and genistin were analyzed as aglycones after hydrolysis because the glucosides were not concentrated by in-tube SPME. The optimum extraction conditions for daidzein and genistein were obtained with 20 draw/eject cycles of 40 microl of sample using a Supel-Q porous layer open tubular capillary column. The extracted compounds were easily desorbed from the capillary by mobile phase flow, and carryover was not observed. Using the in-tube SPME-HPLC method, the calibration curves of these compounds were linear in the range 5-200 ng/ml, with a correlation coefficient above 0.9999 (n = 18), and the detection limits (S/N = 3) were 0.4-0.5 ng/ml. This method was successfully applied to the analysis of soybean foods without interference peaks. The recoveries of aglycones and glucosides spiked into food samples were above 97%.     

Application of heat conduction calorimetry to high explosives

This paper describes some thermal analysis experiments conducted on high explosive samples. These employ differential scanning calorimetry to monitor thermal effects at elevated temperatures (around 200 °C) and heat conduction calorimetry to record thermal effects at much lower temperatures (below 100 °C).The work shows that, due to the generally high thermal stability of many high explosive compositions, heat generation rates are very low, if detectable at all, at normal storage temperatures, even when using a very sensitive instrument. The sensitivity and reproducibility of this technique has been investigated in detail by Wilker et al. [S. Wilker, U. Ticmanis, G. Pantel, Detailed investigation of sensitivity and reproducibility of heat flow calorimetry, in: Proceedings of the 11th Symposium on Chemical Problems Connected with the Stability of Explosives, Sweden, 1998] and shown to be capable of recording heat generation rates of less than a microwatt. This allows continuous measurement of decomposition processes in nitrate ester based propellants at temperatures as low as 40 °C. However, the measurement of very low levels of heat generation is difficult, time consuming and therefore expensive. If the assumption is made that the life limiting process is invariably the slow decomposition of the energetic component, this will frequently lead to very long service lifetime predictions.A number of possible complications are identified. Firstly, due to its low detection threshold, a heat conduction calorimeter may detect other reactions which will not lead to failure, but which may still dominate the heat flow signal. Secondly, the true failure process may generate little energy and be overlooked. In view of these considerations, at present it seems unwise to rely on heat conduction microcalorimetry as the only tool for the assessment of the life of high explosive energetic systems.Based on examples of life terminating processes in high explosives during storage and use, it is clear that decomposition of the energetic material is not invariably the cause of system failure. It is also by no means the only reaction that may take place in, and be observed by, a heat conduction calorimeter.     

Solventless injecction for packed column supercritical fluid chromatography

The adverse effects of injection solvent strength on microbore packed column SFC band broadening are demonstrated and a solventless injection system that eliminates these effects is introduced. The injection system removes solvent in a GC-like manner using a retention gap and an on-column capillary GC syringe. The analyte is delivered to the analytical column in a solvent-free plug of supercritical fluid mobile phase.     

C2H4-K体系中振动态至电子态传能的研究

用TEA CO_2激光将C_2H_4分子激发到高振动激发态，高振动激发态的C_2H_4分子与基态的K原子碰撞发生振动态→电子态（V→E）传能过程，根据提出的能级组模型，对测得的时间分辨原子荧光信号进行处理，获得温度在453－663 K范围内，C_2H_4-K体系中V→E传能速率的数量级为10~(-10)/cm~3·molecule~(－1)·s~(－1)，对应的碰撞传能截面约为0.30～0.80 nm．随着反应温度升高，V→E传能截面减小．上述实验结果表明碰撞体间吸引相互作用在这种非共振的V→E传能过程中起主要作用．利用多极相互作用势下的碰撞络合物模型对实验结果进行了讨论．     

A convergent synthesis of octadeca-2E, 13Z-dienyl acetate, a pheromone component ofSynanthedon tipuliformis C.

A convergent synthesis of octadeca-2E, 13Z-dienyl acetate, a pheromone component ofSynanthedon tipuliformis C., has been developed. The synthesis is based on cross-coupling of 8-iodooct-2E-en-I-ol THP ether with dec-5Z-enyl bromide catalyzed by CuBr. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1529–1531, August, 1997.     

Synthesis and characterization of sulfone-containing polyesters derived from 4,4′-dicarboxydiphenyl sulfone by direct polycondensation

Several sulfone-containing polyesters having inherent viscosities 0.43-0.19 dL g^?1 were prepared by direct polycondensation of 4,4′-dicarboxydiphenyl sulfone (DCDPS) with various aromatic and aliphatic diols, by p-toluenesulfonyl chloride and N,N′-dimethylformamide in pyridine solution. The polyesters were examined by elementary analysis, IR spectra, inherent viscosity, x-ray diffraction, solubility, DSC, and TGA. The diffraction diagram showed that all polyesters were crystalline except that obtained from bisphenol-A. All polymers were soluble in sulfonic acid (18M), phenol and p-chlorophenol, but not in acetone and toluene. These polymers obtained from aromatic bisphenols lost no mass below 325°C, but 10% loss of mass was recorded above 396°C in nitrogen. DCDPS copolymerized with isophthalic acid (IPA) and bisphenol-A had inherent viscosity up to 0.49 dL g^?1, with relatively narrow distribution of molar mass . © 1995 John Wiley & Sons, Inc.     

A statistical method to detect chromosomal regions with DNA copy number alterations using SNP-array-based CGH data

Single nucleotide polymorphism (SNP) arrays were used to detect chromosomal regions with DNA copy number alterations. Current statistical methods for microarray-based comparative genomic hybridization (array-CGH) analysis generally assume certain relationships among adjacent markers on the same chromosome, and these assumptions may be questionable. For an SNP-array-based CGH study, multiple normal reference SNP arrays were collected. In order to utilize these normal reference SNP arrays, we derived an empirical distribution of signal ratios for each SNP marker. With an assumed threshold value for the overall error rate control and the defined signal ratio ranges for chromosomal amplification and deletion, we proposed a procedure to identify chromosomal alteration regions based on several bootstrapped one-sample t-tests and the false discovery rate control. When we have multiple arrays for different individuals with the same disease, our method can also be used to detect SNP markers for chromosomal alteration regions that are common among these individuals. We applied our method to a published SNP array data set for breast carcinoma cell lines. For an individual with breast cancer, numerous chromosomal alteration regions were identified. Compared to results of previous studies, our method identified more chromosomal alteration regions, with some being implicated in the literature to harbor genes associated with breast cancer. For multiple cancer arrays, our results suggested the existence of common chromosomal alteration regions. However, a high proportion of false positives also indicated that genetic variations among different individuals with breast cancer can be present.