Vibrational spectra,normal coordinate analyses,and molecular configurations of crystalline propionic acid

Temperature dependence of the IR spectra of crystalline propionic acid were examined in the temperature range 242–50 K. The intensities of most absorption bands increased on lowering the temperature, but some bands diminished until they disappeared at temperatures lower than about 120 K. Normal coordinate analyses indicate that the former bands are due to the stable cis dimer and the latter due to the less stable trans dimer which would be produced from the cis dimer by simultaneous proton transfer along two hydrogen bonds.     

Insights on the origin of the structural phase transition in BaV10O15 from electronic structure calculations and the effect of Ti-doping on its structure and electrical transport properties

Band structure calculations at the level of LMTO-ASA provide insight into the electronic structure of BaV₁₀O₁₅ and the origin of the structural phase transition. A crystal orbital Hamiltonian population/integrated crystal orbital Hamiltonian population analysis provides evidence that the crystallographic phase transition is driven by V-V bond formation. As well, the energy bands near the Fermi level are very narrow, <1 eV, consistent with the fact that the observed insulating behavior can be due to electron localization via either Mott-Hubbard correlation and/or Anderson disorder. The partial solid solution, BaV_10−xTi_xO₁₅, was examined to study the effect of Ti-doping at the V sites on the structure and electronic transport properties. In spite of the non-existence of “BaTi₁₀O₁₅”, the limiting x=8, as indicated by a monotonic increase in the cell volume and systematic changes in properties. This limit may be due to the difficulty of stabilizing Ti²⁺ in this structure. For x=0.5 both the first order structural phase transition and the magnetic transition at 40 K are quenched. The samples obey the Curie-Weiss law to x=3 with nearly spin only effective moments along with θ values which range from −1090 K (x=0.5) to −1629 K (x=3). For x>3 a very large, ∼2×10⁻³ emu/mol, temperature independent (TIP) contribution dominates. Conductivity measurements on sintered, polycrystalline samples show semiconducting behavior for all compositions. Activation energies for Mott hopping derived from high temperature data range from ∼0.1 eV for x=0-1 and fall to a plateau of 0.06 eV for x=3-7. Low temperature data for x=3, 5 and 7 show evidence for Mott variable range hoping (VRH) with a T^1/4 law and in one case between 5 and 17 K, a Efros-Shklovskii correlated hopping, T^1/2 law, was seen, in sharp contrast to BaV₁₀O₁₅ where only the E-S law was observed up to 75 K. Seebeck coefficients are small (<35 μV/K), positive, roughly TIP and increase with increasing x up to x=5. This may point to a Heikes hopping of holes but a simple single carrier model is impossible. The compositions for x>3 are remarkable in that local moment behavior is lost, yet a metallic state is not reached. The failure of this system to be driven metallic even at such high doping levels is not fully understood but it seems clear that disorder induced carrier localization plays a major role.     

New unsymmetrical difluoroaromatic compounds and estimation of their reactivities in nucleophilic substitution

A series of previously unknown unsymmetrical difluoroaromatic compounds, viz., p-fluorobenzoylphenyl(p-fluorophenyl)-substituted imidazoles, pyrazines, and quinoxalines, were synthesized according to multistep procedures with the use of chloral as the key compound. The reactivities of the resulting difluoroaromatic compounds were estimated based on ¹⁹F and ¹³C NMR spectral data and the results of quantum-chemical calculations. The calculated charge densities on the C_ipso atoms correlate linearly with the experimental chemical shifts in the ¹⁹F and ¹³C NMR spectra. Difluoroaromatic compounds, which are characterized by _F > –110 and _C > 163 and by the charge density on the C_ipso atom higher than 0.08 e, are sufficiently activated to be used for the preparation of high-molecular-weight polyethers.     

Reaction of 3-Acetyl-4,6,6-trimethyl-5,6-dihydro-2-pyrone with Carboxylic Acid Hydrazides

The reaction of 3-acetyl-4,6,6-trimethyl-5,6-dihydro-2-pyrone with the hydrazides of a series of carboxylic acids led to the synthesis of 5-alkyl(cyanomethyl)carbonyl-3,5a,7,7-tetramethylpyrazolino-4,5-c]tetrahydro-2-pyrones, which are the products from cyclization of the intermediately formed alkyl(cyanomethyl)hydrazones of 3-acetyl-4,6,6-trimethyl-5,6-dihydro-2-pyran. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 7, pp. 998–1001, July, 2005.     

Products of hydrolysis of C,N-chelated triorganotin(IV) chlorides and use of products as catalysts in transesterification reactions

Triorganotin(IV) chlorides containing one L^CN chelating ligand were hydrolyzed with an excess of sodium hydroxide. The composition of the products is strongly dependent on the nature of the organic groups bound to the tin atom. Di(n-butyl)tin, dimethyltin as well as the diphenyl derivative exhibits an equilibrium between hydroxide and stannoxane forms (oxide), whereas alkyltin species react spontaneously and reversibly with carbon dioxide present in the air to form carbonate species. On the other hand, diphenyl derivatives display virtually no reaction with CO₂ towards carbonates, while the di-t-butyl-substituted tin derivative is stable under the same experimental condition and remains as a tin hydroxide. In the case of the dimethyltin derivative, a methyl group migration was observed with displacement of one L^CN chelating ligand during the reaction on the air. The coordination geometry of the tin central atom(s) of all studied compounds can be described as trigonal bipyramidal with a dative bonded dimethylamino group occupying one coordination site. The catalytic activity of these compounds in transesterification reactions is generally lower compared to the systems reported in the literature, with the exception of the transesterification of ethyl acetate by cyclohexanol which displays a remarkable activity.     

Tl2O3/聚-N-乙烯基咔唑复合纳米线的研究

Stable monolayers of electropolymerized poly-N-vinylcarbazole (EPVK) and arachidic acid(AA) are obtained on a subphase of alkaline Tl2O3 colloidal solutions. As revealed by the atomic force microscope, there is phase separation in the mixed LB monolayers. Transmission electron microscopic observations reveal that ordered arrays of composite Tl2O3/Epvk nanowires are formed in the mixed monolayers. Formation of the composite nanowire arrays is attributed to the ordered adsorption of Tl2O3 colloidal particles along the polycationic EPVK chains. The composite nanowire array is 3.2nm wide with a spacing of 2.7nm.The composite nanowire arrays can also be formed when pure EPVK is used. Composite LB multilayers of Tl2O3/EPVK nanowire arrays are prepared. The bilayer spacing is 5.54nm.The present study is of importance to the fabrication of inorganic semiconductor/functional polymer composite nanowires.     

Structure and hydration of polycytidylic acid from the data of infrared spectroscopy, EHF dielectrometry and computer modeling

The aim of this paper is to summarize the original results concerned with the elucidation of the role of water environment in the formation of different structures of polyribocytidylic acid (poly(rC)), depending on the pH, temperature and ion content. To solve this problem, we studied the hydration of poly(rC)-K⁺ in films differing in water content, by methods of infrared spectroscopy and piezogravimetry, and in solution, using the dielectric measurements at a wavelength of 7.6 mm (extremely high frequencies — EHF). The experimental results were confirmed by a Monte Carlo simulation of the interaction between water molecules and single-strand and double-strand poly(rC) fragments in clusters of 800 water molecules. A model of hydration of double-strand complex of poly(rC)⁺-poly(rC) has been proposed based on our results and the known X-ray parameters of the complex. The obtained results and proposed structure of poly(rC)⁺-poly(rC) suggest that, the stabilization of this complex occurs due to intra- and inter-chain water bridges, together with the hydrogen bonds between neutral and protonated cytosines in pairs.     

Synthesis of ω- and (ω – 1)-acetylenic acids from five-, six-, or seven-membered cycloalkanones

A convenient method for the synthesis of - and ( – 1)-acetylenic acids involves free-radical oxidative scission of cycloalkanones containing five-, six, or seven-membered cycles to give the corresponding -olefinic acids followed by bromination of the latter and subsequent dehydrobromination under the action of alkalis.     

High temperature corrosion behaviour of M(Co,Ni)CrAIY-coatings on high temperature materials-microanalytical investigations

In our former investigations, the phenomenon high temperature corrosion (HTC) was described exemplarily on selected materialcoating combinations for blades of stationary gas turbines, mainly in the temperature region of up to 750° C. To answer the question, in which manner higher gas inlet and/or higher material surface temperature would influence the HTC behaviour, a special analytical technique—the integral layer profile analysis—was introduced to ameliorate concentration profile methods. By examining IN 738 LC specimens with CoCrAlY plasma spray coating, stressed by hot gas at 900° C, the limits of this system are shown by explaining the corrosion mechanism; the method is also used for other systems, e.g. U 520 with NiCrAlY coating at 750° C.     

Thermal polymerization of acrylamide during the formation of the structures of acrylamide complexes with metal nitrates

The effects of the composition of Mn^II, Co^II or Ni^II nitrate hydrate — acrylamide (AAM) mixtures and of the duration of their aging at ambient temperature on the structurization of acrylamide complexes and on the character of their thermal polymerization have been studied by scanning and isothermic differential calorimetry. Structurization is a rather prolonged step in the synthesis of acrylamide complexes. The peculiarities and rate of this step are determined by the composition of the mixture and by the nature of the complexforming compound; it yields several structural modifications of the AAM complexes. The thermal polymerization of those structural forms of acrylamide complexes that polymerize at low temperatures may be formally described as polymerization in an acrylamide-nitrate-water mixture. The effective activation energy of the polymerization of acrylamide mixed with Mn^II nitrate hydrate is 45 kJ mol^–1.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 679–683, April, 1995.This work was carried out with financial support from the Russian Foundation for Basic Research, Project No. 93-03-4162.