Free vibration of non-uniform nanobeams using Rayleigh–Ritz method

In this article, boundary characteristic orthogonal polynomials have been implemented in the Rayleigh–Ritz method to investigate free vibration of non-uniform Euler–Bernoulli nanobeams based on nonlocal elasticity theory. Non-uniform cross section of nanobeams has been considered by taking linear as well as quadratic variations of Young's modulus and density along the space coordinate. Detailed analysis has been reported for all the possible cases of such variations. The objective of the present study is to analyze the effects of nonlocal parameter, boundary condition, length-to-diameter ratio and non-uniform parameter on the frequency parameters. It is found that clamped nanobeams are having highest frequency parameters than other types of boundary conditions for a particular set of parameters. It is also observed that frequency parameters decrease with increase in scaling effect parameter. First four deflection shapes of non-uniform nanobeams have also been incorporated. In this analysis, some of the new results in terms of boundary conditions have also been included.     

一种宽能谱多球中子谱仪能量响应的MC模拟

利用蒙特卡罗程序FLUKA模拟计算了聚乙烯慢化球和辅助材料慢化球对低能中子到高能中子的响应函数曲线。结果表明,对纯聚乙烯球来说,随着聚乙烯层厚度的增加,响应曲线峰逐步右移,峰值在高能区有所下降,对20 Me V以上的中子,无论纯聚乙烯球的尺寸有多大,其响应均下降到很低的程度;对辅助材料慢化球来说,中子能量小于1 Me V时,辅助材料慢化球与聚乙烯慢化球的响应曲线相似,但当中子能量大于20 Me V时,中子与辅助材料层发生(n,xn)反应,慢化球的响应呈显著上升趋势。分析计算结果,最终能够确定宽能谱多球中子谱仪的尺寸组合。     

Responsive mechanism of 2-(2'-hydroxyphenyl)benzoxazole-based two-photon fluorescent probes for zinc and hydroxide ions

Response theory is used to investigate one- and two-photon absorption(TPA) as well as the emission properties of a series of potential zinc ion and pH sensitive materials containing 2-(2’-hydroxyphenyl)benzoxazole(HPBO) end groups.Special emphasis is placed on the evolution of their optical properties upon combining with zinc ions or deprotonation.Our calculated results indicate that upon combining with zinc ions or deprotonation,these HPBO derivatives show drastic changes in their one-photon absorption(OPA),emission,and TPA properties.Moreover,the mechanisms of the probes are analyzed and found to be an intramolecular charge transfer.These compounds are thus proved to be excellent candidates for two-photon fluorescent zinc and pH probes.     

Landau damping in a bounded magnetized plasma column

The damping decrement of Landau damping and the effect of thermal velocity on the frequency spectrum of a propagating wave in a bounded plasma column are investigated.The magnetized plasma column partially filling a cylindrical metallic tube is considered to be collisionless and non-degenerate.The Landau damping is due to the thermal motion of charge carriers and appears whenever the phase velocity of the plasma waves exceeds the thermal velocity of carriers.The analysis is based on a self-consistent kinetic theory and the solutions of the wave equation in a cylindrical plasma waveguide are presented using Vlasov and Maxwell equations.The hybrid mode dispersion equation for the cylindrical plasma waveguide is obtained through the application of appropriate boundary conditions to the plasma-vacuum interface.The dependence of Landau damping on plasma parameters and the effects of the metallic tube boundary on the dispersion characteristics of plasma and waveguide modes are investigated in detail through numerical calculations.     

Fabrication of Sensitive Potentiometric Cholesterol Biosensor Based on Co3O4 Interconnected Nanowires

Highly sensitive, selective, reliable and inexpensive cholesterol biosensors are highly demanded for the routine monitoring of cholesterol molecules in order to prevent heart failure incidents. In this study, Co₃O₄ nanostructures are synthesized using polyvinyl pyrrolidone surfactant as growth template by a low temperature aqueous chemical growth method. The morphology of nanostructures was investigated by scanning electron microscopy and X‐ray diffraction techniques. The nanostructures exhibit interconnected nanowires like morphology with interconnected network of nanowires. The nanostructures of Co₃O₄ are polycrystalline. The cholesterol oxidase was physically adsorbed on the interconnected nanowires of Co₃O₄ for the chemical sensing of cholesterol molecules. The sensor device detected a wide range of cholesterol from 1×10^?7 M to 1×10^?3 M concentrations with sensitivity of ?94.031 mV/decade. A detection limit of 0.035×10^?7 M cholesterol concentration was observed and a fast response time of 10 s was also noticed. The fabricated device is highly stable, selective, sensitive, reproducible and repeatable. All the collected information about presented cholesterol biosensor indicates its potential application for the monitoring of cholesterol concentrations from human blood serum and real‐life samples.     

Effect of Particle Size on Electro-Optic Properties of Liquid Crystal Devices Doped with γ-Cyclodextrin Stabilized Barium Titanate Nanoparticles

Barium titanate stabilized by γ-cyclodextrin nanoparticles were prepared by using a microwave reactor equipped with ultrasonic nozzle mixing at 240°C in a tetraethylene glycol solution of barium ethoxide and titanium ethoxide in the presence of γ-cyclodextrin. Particles in γ-cyclodextrin-stabilized BaTiO₃ nanoparticles had an average diameter of 2.1 nm and mainly distributed within the range of about 1 to 4 nm. The γ-cyclodextrin-stabilized BaTiO₃ nanoparticles were mixed with 4-cyano-4′-pentylbiphenyl at room temperature resulting in a liquid crystal sol of 4-cyano-4′-pentylbiphenyl. The response time of liquid crystal devices in the presence of γ-cyclodextrin-stabilized BaTiO₃ nanoparticles was faster than that in the absence.     

Mechanically Adaptive and Shape‐Memory Behaviour of Chitosan‐Modified Cellulose Whisker/Elastomer Composites in Different pH Environments

Biomimetic polymer composites with water‐active mechanically adaptive and shape‐memory behaviour in different pH environments are synthesised by using chitosan‐modified cellulose whiskers (CS‐CWs) as the stimulus‐responsive phase and thermoplastic polyurethane (TPU) as the resilient matrix. The effect of surface modification on the mechanically adaptive behaviour of CS‐CW/TPU composites is investigated by using three representative solutions with various pH values. The results show that surface modification significantly enhances the modulus contrast under wet and dry conditions with the acidic solution as the stimulus, while maintaining the high modulus contrast with the basic solution as the stimulus. CS‐CW/TPU composites also exhibit excellent shape‐memory effects in all three solutions that are comparable to those pristine CW/TPU composites. Furthermore, activation of force generation in the stretched CS‐CW/TPU composites by water absorption/desorption was observed.     

Tumor Microenvironment Stimuli-Responsive Fluorescence Imaging and Synergistic Cancer Therapy by Carbon-Dot–Cu2+ Nanoassemblies

A method is developed to fabricate tumor microenvironment (TME) stimuli-responsive nanoplatform for fluorescence (FL) imaging and synergistic cancer therapy via assembling photosensitizer (chlorine e6, Ce6) modified carbon dots (CDs-Ce6) and Cu²⁺. The as-obtained nanoassemblies (named Cu/CC nanoparticles, NPs) exhibit quenched FL and photosensitization due to the aggregation of CDs-Ce6. Their FL imaging and photodynamic therapy (PDT) functions are recovered efficiently once they entering tumor sites by the stimulation of TME. Introducing of Cu²⁺ not only provides extra chemodynamic therapy (CDT) function through reaction with hydrogen peroxide (H₂O₂), but also depletes GSH in tumors by a redox reaction, thus amplifying the intracellular oxidative stress and enhancing the efficacy of reactive oxygen species (ROS) based therapy. Cu/CC NPs can act as a FL imaging guided trimodal synergistic cancer treatment agent by photothermal therapy (PTT), PDT, and thermally amplified CDT.     

Zwitterionic Polydopamine Engineered Interface for In Vivo Sensing with High Biocompatibility

Electrochemical sensing performance is often compromised by electrode biofouling (e.g., proteins nonspecific binding) in complex biological fluids; however, the design and construction of a robust biointerface remains a great challenge. Herein, inspired by nature, we demonstrate a robust polydopamine-engineered biointerfacing, to tailing zwitterionic molecules (i.e., sulfobetaine methacrylate, SBMA) through Michael Addition. The SBMA-PDA biointerface can resist proteins nonspecific binding in complex biological fluids while enhancing interfacial electron transfer and electrochemical stability of the electrode. In addition, this sensing interface can be integrated with tissue-implantable electrode for in vivo analysis with improved sensing performance, preserving ca. 92.0% of the initial sensitivity after 2 h of implantation in brain tissue, showing low acute neuroinflammatory responses and good stability both in normal and in Parkinson′s disease (PD) rat brain tissue.