用于核磁共振的直接数字合成频率源

直接数字频率源的使用可以简化核磁共振谱仪的设计,降低核磁共振谱仪设计的成本. 文中介绍一种采用Analog Device公司的AD7008芯片设计的基于PC机的直接数字合成频率源,它可实现频率和相位的高速切换,频率分辨率为0.01Hz,相位分辨率为0.09°,最后给出核磁共振实验结果.     

Optical and dielectric properties of polyvinylchloride/polymethylmethacrylate blends

The optical and dielectric properties of prepared polyvinychloride/atactic polymethylmethacrylate (PVA/-PMMA) blends are studied as a function of applied field frequency and PMMA content. The observed optical energy gaps and the energy gap tails were determined from the measured absorption spectra. It was found that the applied frequency and the -PMMA concentration have some effects on the physical parameters such as the optical energy gap, the glass transition temperature (T_g), the dielectric constant, and the refractive index. Correlation between the determined optical energy gaps and the measured T_g is presented. The observed changes in these physical parameters are due to structural changes in the amorphous domains, impurities and space charge within the interfaces in the mixed phases.     

A comparative study of approaches for spectral control of Ti:sapphire pulsed lasers

The results of a comparative study (theoretical and experimental) of two original approaches for spectral control of two-wavelength pulsed Ti:sapphire (Ti:S) lasers and the most popular conventional methods are presented. Single line operation as a particular case is considered. We compare our own methods: (i) combined dual pulse pumping–passive self-injection locking (DPP–PSIL) and (ii) coupled cavity dye laser injection locking (CCLIL) with the conventional methods: (i) intracavity selection (IS), (ii) PSIL and (iii) traditional injection locking using an external dye laser. The most important criteria—laser efficiency, emission line width, tuning range, spectral purity and buildup time are compared under optimized conditions. The comparison is made using the same pump source with constant output energy in each case. The results serve as a basis for choosing correctly the most suitable spectral control technique for a particular Ti:S laser application. It is shown that the DPP–PSIL method guarantees a remarkable improvement of the Ti:S laser performance (nearly doubling the laser efficiency with the same line width and comparable laser tuning range as IS, combined with a protection of the selectors). The CCLIL approach assures a maximum laser efficiency in narrow line emission in addition to a minimal and reproducible buildup time. The IS method provides a maximal tuning range.     

SiO2/PEG分散体系动态剪切流变行为

在动态应变条件下, SiO2/PEG200(聚乙二醇, 平均分子量为200)分散体系出现了剪切增稠现象. 剪切流变实验表明, 在两种情况下都出现了剪切增稠: 一种是在不同的恒定频率下应变扫描, 在临界应力γc出现的剪切增稠; 另一种是恒定的应变(γ0=500%)条件下频率扫描, 在临界频率棕c抑10 rad·s-1出现的剪切增稠. 在不同的恒定频率应变扫描条件下, 实验研究了储能模量(G’)和耗能模量(G’’)与应变的关系, 同时初步探讨了应变与不同恒定频率的函数关系. 在线性粘弹性区域内, G’和G’’满足G’∝ω0.57和G’’∝ω0.7指数关系. 在恒定的应变条件下, 发现模量和复数粘度与扫描频率具有强烈的依赖关系, 这些现象可以定性地通过“粒子簇”理论来解释.“粒子簇”理论认为这种剪切增稠的发生是由于形成了亚稳定、流动所导致的“粒子簇”, 使得粘度上升.     

Investigation of Absorption Spectra of(Cr~(4 ),Yb~(3 )):YAG Crystal

1lntroductionThsaturableabsotherswhichhavebeensucceSSfullyusedforpassiveQswitched1asersincludedye['],Lffi:F2colDcenterCrytals['],Cr -doPedcrysds['~'],etc.Amngthem,Cr -doPedCryStalsdevtheedinrecentyearssuchasCr :YAG,Cr :GSGG,andCr :WeSnyandsoon,havetheadVanageSofgoodphoto-chedcalandthermalstabillty,largabsorptbocross-section,besaturableintensityandhighdaInaethreshod.Inaddition,Cr canbedoPedintOgainmediumtoformselfQ-switchedl..,['J.Cr -dopedcrystalsbecomethemostprotalsingsatIJrable…     

消除个体条件测量差异的动态光谱及其频域提取法的研究

在近红外光谱的皮肤无创检测中,个体差异是一个相当大的技术难题。在血液成分无创检测中,个体差异包括毛发、角质层、表皮、真皮、皮下组织、肌肉、骨骼等。研究表明,个体差异随着个体不同而不同,是阻碍血液成分无创检测技术实用化的重要因素。文章提出了基于光电容积脉搏波的产生机理和傅里叶变换的检测血液成分浓度的新方法——频域提取法,这种方法可以消除测量中由于皮肤组织和肌肉组织产生的差异;提出了动态光谱的概念,从理论和实验两个方面说明了这种方法的优点,并通过实验直接提取了各波长中仅由血液成分产生的吸光度光谱图,对于近红外光谱无创检测血液成分的实际应用有着重要意义。     

Fluctuating characteristics of radiative source term in hydrogen turbulent jet diffusion flame

The laminar flamelet model in combination with joint probability density function transport equation of mixture fraction and turbulence frequency is used to simulate turbulent jet diffusion flames of hydrogen. The frequency distributions of radiative source terms are calculated for four important infrared bands of water vapor. The results show that, for the given ensemble, about 95% samples of radiative source term for each band locate within the region of ±3.0 standard deviation of the mean radiative source term. Due to the different relation between band intensity parameters and temperature for every band, the symmetrization of frequency distributions for each band is different.     

Stimulated four-photon mixing and efficient polychromatic visible light generation in SiO2-based single-mode optical fibers pumped at 1.319 μm

The generation of near-infrared and intense visible light through stimulated multi-wave mixing processes in single-mode silica-based optical fibers pumped by a Q-switched and mode-locked Nd:YAG laser operated at 1.319 μm is described. The experimental results show that intense infrared light around 1.2 μm is produced via selp-hase-matched four-photon mixing at the minimum group velocity dispersion region of pure SiO₂-core and P₂O₅-doped silica fibers. In the visible spectral region, from 580 nm to 600 nm, 20 W peak power 100-ps pulses were generated by pumping single spans of single-mode P₂O₅-doped and undoped SiO₂-core fibers with 1.319-μm laser pulses. The signal light generated in such fibers propagated in the LP₀₂ fiber mode and exhibited a threshold power that depended upon the fiber length and a critical length that was power dependent. Also, it exhibited an asymmetrical spectrum of a few nanometers bandwidth, with a long tail toward high frequencies. For GeO₂-doped silica-based fibers, a multiple-wavelength visible signal propagating in several high-order fiber modes was generated.     

Improvements in drug purity determination by capillary electrophoresis using UV-absorption and LIF-detection with a UV-laser

Summary In drug purity determinations by capillary electrophoresis using UV-detection generally a relative high concentration of the main compound has to be injected. Principles how to handle overloading effects are described. NXX-066 is a drug with a native fluorescence which made it possible to use of CE system equipped with a LIF-detection unit. Monitoring drug purity determination with LIF detection results in an improved limit of quantification of the impurities and/or opens a possibility to avoid an overloaded main peak. A frequency doubled (FRED) argon ion laser set at 244 nm was used as excitation source in drug purity determination with the LIF-detection unit and the chemicals used were therefore carefully chosen in order to minimize the background noise level, which easily is enhanced when fluorescence detection is performed in the UV-range. The separation of the fluorescent NXX-066 analogues proved to be a difficult task, but an adequate resolution was obtained when β- and γ-cyclodextrins was added as structural selectors and the separation window was expanded by the use of a repressed/reversed electroosmotic flow. A comparison of the separation capability for the UV-detection system and the laser induced fluorescence detection system was performed, showing that the overloading effects of the main peak can be removed using the CE-LIF system and thereby obtain a substantially improved resolution of the analogues. A comparison of LC-UV and CE-UV for drug purity determination of a crude product from, synthesis of NXX-066 is also included in this paper where a good correlation of the results were obtained. Presented at the 8th. International Symposium on High Performance Capillary Electrophoresis, Jan. 21–25 1996, Orlando, USA.     

AC loss measurements on model Bi-2223 conductors

Measurements of the AC loss in applied magnetic fields at 77 K have been made on model composite Bi-2223 conductors. A vibrating sample magnetometer (VSM) and a dual Hall sensor magnetometer (HSM) were used to cover the frequency range from below 0.01 Hz to over 250 Hz at AC fields up to 0.05 T rms. The VSM was limited to the frequency range below 0.2 Hz. A comparison of the two measurement techniques was possible at intermediate frequencies. The samples consisted of vertical stacks of well separated flat filaments of superconductor in Ag and Ag-alloy matrix, allowing a range of filament coupling conditions to be explored.