Detail enhancement of blurred infrared images based on frequency extrapolation

A novel algorithm for enhancing the details of the blurred infrared images based on frequency extrapolation has been raised in this paper. Unlike other researchers’ work, this algorithm mainly focuses on how to predict the higher frequency information based on the Laplacian pyramid separation of the blurred image. This algorithm uses the first level of the high frequency component of the pyramid of the blurred image to reverse-generate a higher, non-existing frequency component, and adds back to the histogram equalized input blurred image. A simple nonlinear operator is used to analyze the extracted first level high frequency component of the pyramid. Two critical parameters are participated in the calculation known as the clipping parameter C and the scaling parameter S. The detailed analysis of how these two parameters work during the procedure is figure demonstrated in this paper. The blurred image will become clear, and the detail will be enhanced due to the added higher frequency information. This algorithm has the advantages of computational simplicity and great performance, and it can definitely be deployed in the real-time industrial applications. We have done lots of experiments and gave illustrations of the algorithm’s performance in this paper to convince its effectiveness.     

均匀流中近壁面垂直流向振荡圆柱水动力特性研究

对均匀来流下靠近壁面处在垂直流向做强迫振荡运动的光滑圆柱的水动力特性进行了试验研究. 试验在拖曳水池中进行, 雷诺数为2× 10⁵, 通过采集顺流向和垂直流向的力, 得到了阻力系数、升力系数、相位角等与间隙比、振荡频率和振幅之间的关系. 通过研究得到如下结论: 1)振荡圆柱的平均阻力系数在近壁面处随间隙比的减小而骤降; 2)振荡圆柱泄涡受到完全抑制的临界间隙比要小于静止圆柱; 3)近壁面的存在对振荡圆柱的能量传递有着重要的影响, 自由边界圆柱强迫振荡所得到的水动力系数不能用来预报海底管道的涡激振动; 4)对于振荡圆柱, 附加质量系数只有在一定的频率范围内才是定值, 且在低频率区域其绝对值随间隙比减小而增大; 5)圆柱在进行强迫振荡时, 其平均阻力系数、振荡阻力系数和振荡升力系数均随无因次振幅的增加而增大. 关键词： 海底管道 强迫振荡 水动力特性 涡激振动     

基于小波能量和光斑尺寸的干扰图像尺度分析

介绍了激光干扰对CCD成像系统的影响,从影响光电成像系统目标检测性能的角度阐述了激光干扰图像与背景杂波的相似性.针对激光干扰图像的频率特性,利用小波分析在图像处理中的优势,结合机器视觉中背景杂波的量化尺度,提出了基于小波能量和光斑尺寸的综合图像尺度.对典型激光干扰图像的小波分析显示,随着激光干扰功率的增大,干扰图像中的低频分量和高频分量会同时增加,图像中的光斑可被看作是低频分量,光斑周围“斑驳状”的散斑是高频分量,类似于盐噪音.激光视场内干扰实验及数值计算表明:激光干扰会降低Otsu算法分割准确度,增加相关检测虚警概率,该尺度将干扰图像的高频分量和低频分量结合起来,同时克服了单一光斑尺度和小波能量尺度的局限性,能够较好地评估视场内激光干扰CCD成像系统的效果.     

Spectroscopic Study of a Hollow Cathode Discharge Operating at Direct and High Frequency Currents - Temperature Measurements

Spectra excited in a hollow cathode discharge operating at high frequency and direct currents have been studied. Samples (La₂O₃ and Y₂O₃) were placed in the copper hollow cathodes and argon was a carrier gas. The excitation temperatures of Ar I, Ar II, Cu I, Y I, Y II and La II in high frequency and direct current hollow cathode discharges have been determined and compared.     

Fiber Grating Based Optical Recirculating Filter with an Optimized Response

A novel optical recirculating filter for RF applications is described, which exploits a specially designed fiber grating with a ramped spectral profile to enable optimization of the filter response. The design overcomes the limitations imposed by loss in conventional fiber recirculating filters. Additionally, a tunable free spectral range is demonstrated by using the device in a grating array. Both theoretical and experimental results are presented and discussed.     

Stimulated four-photon mixing and efficient polychromatic visible light generation in SiO2−based single-mode optical fibers pumped at 1.319 μm

Abstract

The generation of near-infrared and intense visible light through stimulated multi-wave mixing processes in single-mode silica-based optical fibers pumped by a Q-switched and mode-locked Nd:YAG laser operated at 1.319 μm is described. The experimental results show that intense infrared light around 1.2 μm is produced via selp-hase-matched four-photon mixing at the minimum group velocity dispersion region of pure SiO₂?core and P₂O₅?doped silica fibers. In the visible spectral region, from 580 nm to 600 nm, 20 W peak power 100-ps pulses were generated by pumping single spans of single-mode P₂O₅?doped and undoped SiO₂?core fibers with 1.319-μm laser pulses. The signal light generated in such fibers propagated in the LP₀₂ fiber mode and exhibited a threshold power that depended upon the fiber length and a critical length that was power dependent. Also, it exhibited an asymmetrical spectrum of a few nanometers bandwidth, with a long tail toward high frequencies. For GeO₂?doped silica-based fibers, a multiple-wavelength visible signal propagating in several high-order fiber modes was generated.     

Frequency multiplication using induced dipole domains in a semiconductor superlattice

We theoretically studied the possibility of frequency multiplication using propagating dipole domains which are induced in a semiconductor superlattice by microwave radiation. We have investigated the dynamics of electrons in a superlattice submitted to both a static voltage and a microwave field by performing a simulation based on a drift-diffusion model and incorporating current-limiting boundary conditions. The motion of electrons in the superlattice was governed by an Esaki–Tsu drift velocity field characteristic with a negative differential mobility above a critical electrical field. The simulation delivered, for a static voltage larger than a critical voltage, the periodic formation and annihilation of propagating dipole domains and, as a consequence, a reduction of the direct current through the superlattice. Our simulation showed that an additional microwave field can periodically induce and subsequently quench domains giving rise to a strongly anharmonic current. The anharmonicity of the current is the origin for the generation of higher harmonics of the microwave field. Both the formation and annihilation of a domain can take place within a time of about 1 ps suggesting that the mechanism of domain induction and quenching can be used for generation of radiation up to almost 1 THz.     

An efficient method for calculation of the MM fiber frequency response in the presence of mode coupling

We present a more efficient and less time consuming method for calculating the mode coupling effects in multimode fibers. Instead of solving the power transfer equation, we solve the system of coupled equations. It is shown that this method is much faster, more accurate and easier to implement. It allows defining the fiber transfer function in the matrix formalism. The convergence of the power transfer equation to our method is investigated.     

Frequency Map分析在合肥光源GPLS上的应用

介绍了Frequency Map Analysis在合肥光源上的应用,通过粒子跟踪得到加入六极以及八极磁铁后合肥光源的tune漂移,根据得到的tune图分析高阶共振情况计算发现通用光源模式(GPLS)lattice处在弱共振带上.     

钛酸铅单晶纳米棒的生长机制和声子特性研究

采用改进熔盐法经一步反应合成了直径50-80nm,长度为1-5μm的单晶PbTiO3纳米棒。纳米棒沿(100)晶向生长,其形成可以用Ostwald成熟机制来解释。PbTiO3纳米棒晶格结构为四方(a=b=3.926,c=3.963),与单晶相比四方性明显下降。通过变温拉曼测试发现其铁电-顺电相变温度为440℃,低于单晶(490℃)。相变过程中“软模”E(1TO)的软化行为(从67 cm-1到56 cm-1)比单晶显著减弱,表明钛酸铅纳米棒中铁电性的弱化。