Controlled structure and density of “living” polystyrene brushes on flat silica surfaces

Thin layers of polystyrene were grown from surface-grafted nitroxide initiators via controlled “living” free radical polymerization. The “reactive” Langmuir-Blodgett deposition method allowed an effective control of the initiator layer density leading to PS brushes with different and high grafting density and stretching. The influence of the grafting density on the layer structure was studied. Comparison with theoretical predictions for monodispersed brushes in bad solvent was discussed. The thickness was found to vary linearly with molecular weight and the density dependence was shown using wetting measurements. Special features of controlled radical nitroxide polymerization from a surface were discussed. A direct comparison of the molecular weight and polydispersity between surface and bulk polymers was made by de-grafting the brushes into a toluene/HF solution. Finally, some evidence of a “surface Fischer” effect was shown from re-initiated layers. Received 20 December 2001     

CH分子束的强度与CH_4/He混合配比的关系及CH(A~2Δ)振转温度的计算

为了获得CH分子束及其相关特性,以氦气为载气,利用直流脉冲放电技术产生了CH分子束。实验记录了放电时间相对于脉冲分子束不同延时CH光谱信号强度的变化,放电相对延时为460μs左右获得最大的信号强度。研究了在保持CH4/He总气压3 atm和放电电压-4 kV不变的条件下CH分子束强度与不同配比的关系,建立了理论模型,对实验数据进行了理论拟合,拟合曲线与实验结果符合较好,配比为1%(甲烷与氦的气压比为1∶99)左右能够维持较稳定的放电现象和较强的放电强度而获得较强的CH自由基束流。在这一配比下对CH(A2Δ-X2Π)(0,0)带发射光谱进行探测和分析,获得CH(A2Δ)转动温度和振动温度分别为2455 K和4575 K,并估计此时每个脉冲中大约包含1013~1014个CH自由基。     

On the topological representation of catalytic cycles with nonlinear steps

Reaction route analysis is applied to visualize reaction networks in several heterogeneous catalytic reactions. Combination of the theory of complex reactions with the notion of catalytic cycles results in a topological representation of complex mechanisms with the nodes comprising all possible surface species including free sites and branches indicating interconnections between reactions.     

Synthesis and crystal structure of 1,3,5-tris [4-(phenylethynyl)phenyl]benzene

The crystal structure of 1,3,5-tris[4-(phenylethynyl)phenyl]benzene (1) has been investigated. Compound1 represents a model of the repeating unit of the most typical polyphenylene, which contains 1,3,5-trisubstituted benzene rings (chain centers) and acetylenic groups (complex-forming and cross-linking centers) in the main chain. The acetylene groups of neighboring molecules have a tendency to close mutual arrangement, which is favorable for their topochemical interaction. However, the relative conformational rigidity of molecules1 restricts not only the possibility of the optimal adjustment of the reactive sites of neighboring molecules to one another, but also hampers the close packing of molecules in the crystal, which contains channels filled by the solvent molecules (chloroform).Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 1986–1992, November, 1994.The work was carried out with the financial support of the International Science Foundation and the American Crystallographic Association.     

临界可压缩模类与弱Jacobson根

本文讨论临界可压缩模类和结合环的弱Ｊａｃｏｂｓｏｎ根．首先，我们证明了非平凡的临界可压缩模类是素模的特殊类．其次，我们引入结合环的弱Ｊａｃｏｂｓｏｎ根．弱Ｊａｏｎｂｓｏｎ根是特殊根．最后，我们给出有关弱本原环，半弱本原环和弱Ｊａｃｏｂｓｏｎ根环的某些性质．     

Synthesis of functional polymers—Vinylidene fluoride based fluorinated copolymers and terpolymers bearing bromoaromatic side‐group

The radical co‐ and terpolymerization of 4‐[(α,β,β‐trifluorovinyl)oxy]bromo benzene (TFVOBB) with 1,1‐difluoroethylene (or vinylidene fluoride, VDF, or VF₂), hexafluoropropene (HFP), perfluoromethyl vinyl ether (PMVE), and chlorotrifluroroethylene (CTFE) is presented. Although TFVOBB could be thermocyclodimerized, it could not homopolymerize under radical initiation. TFVOBB could be copolymerized in solution under a radical initiator with VDF or CTFE comonomers, while its copolymerization with HFP or PMVE were unsuccessful. The terpolymerization of TFVOBB with VDF and HFP, or VDF and PMVE, or VDF and CTFE also led to original fluorinated terpolymers bearing bromoaromatic side‐groups. The conditions of co‐ and terpolymerization were optimized in terms of the nature of the radical initiators, and of the nature of solvents (fluorinated or nonhalogenated). Various monomer concentrations in the co‐ and terpolymers were assessed by ¹⁹F and ¹H‐NMR spectroscopy. The thermal and physico chemical properties were also studied. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5077–5097, 2004     

Influence of charge distribution on the conformation of neutral polyampholytes

Summary Two polyampholyte copolymers based on sodium-2-acrylamido-2-methylsulfonate (NaAMPS) and methacryloyloxyethyltrimethylammonium chloride (MADQUAT) have been prepared either in homogeneous solution or by an inverse microemulsion polymerization technique. The copolymer microstructure was shown to depend on the method of preparation. The microemulsion polymerization yields copolymers with a monomer sequence distribution not far from random while those obtained by polymerization in solution have a strong tendency to alternation. The aqueous-solution properties of the two samples have been investigated by viscometry. The results show that the charge distribution along the copolymer chain affects considerably its conformation, in good agreement with recent theoretical studies. Paper presented at the I International Conference on Scaling Concepts and Complex Fluids, Copanello, Italy, July 4–8, 1994     

19F NMR study of relative polarities and reactivities of N-H,N-Hg,and N-Au bonds in 2-(4-fluorophenyl)benzimidazole and its PhHg and Ph3PAu derivatives in intermolecular exchange

It has been shown by the¹⁹F NMR method that the relative polarities of nitrogenelement bonds in 2-(4-fluorophenyl)benzimidazole and its PhHg and PPh₃Au derivatives increase in the order N-H19F NMR. It has been found that these reactions occur by a bimolecular associative mechanism and that the N-H bond is substantially less reactive than the N-Hg and N-Au bonds, which have identical reactivities within the limits of sensitivity of the method used.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1574–1580, August, 1995.This work was carried out with financial support from the Russian Foundation for Basic Research (Project No. 93-03-5528).