Synthesis,characterization, and application of griseofulvin surface molecularly imprinted polymers as the selective solid phase extraction sorbent in rat plasma samples

In present study, an investigation was carried out to develop and validate an analytical method for the selective extraction and determination of griseofulvin (GSF) from plasma samples. For this purpose, a rational approach was made to synthesize and characterize the surface molecularly imprinted polymers (SMIPs). The SMIPs were utilized as solid phase extraction (SPE) sorbents. The SMIPs were prepared by using GSF as template molecule on the surface of modified silica particles through a non-covalent technique. The particles demonstrated high adsorption capacity (119.1 µg/mL), fast adsorption equilibrium time (30 min) and good recognition selectivity for the template drug. The scanning electron microscopy and infrared spectroscopy were used to explain the structural and morphological characteristics of the SMIPs and surface non-imprinted polymers. The SPE method was combined with HPLC for plasma analysis. The method validation results demonstrated that the established method possessed good linearity for GSF ranging from 0.1 to 50 µg/mL (R² = 0.997). The limit of detection for this method was 0.02 µg/mL for rat plasma samples. The recoveries of GSF from spiked plasma samples were (90.7–97.7%) and relative standard deviations were (0.9–4.5%). Moreover, the SMIPs as selective SPE sorbent can be reused more than 8 times which is a clear advantage over commercial SPE sorbents. Finally, the usefulness of the proposed strategy was assessed by extraction and detection of GSF in real rat plasma samples.     

大气闪烁对自适应光学校正的影响

 激光在大气湍流中长距离近水平传输时，闪烁加强，限制了常规自适应光学的校正能力。数值研究了大气闪烁对自适应光学校正的影响，拟合得到了在Fresnel数一定时，Strehl比与Rytov方差的表达式，以及Rytov方差一定时，Strehl比与Fresnel数的表达式。结果表明，在Rytov方差较小时，纯相位校正Ｓtrehl比只与Rytov方差有关；随着Rytov方差的增加，Strehl比不仅与Rytov方差有关，还与Fresnel数有关，Fresnel数越大，校正Strehl比越大；大发射和接收孔径有利于提高校正Strehl比；在一定的Rytov方差下，Stregl比随Fresnel数增大而增加，逐步趋于饱和，达到纯相位校正的极限。     

黑米花色苷酰化修饰红外光谱分析

黑米花色苷易受外部环境影响发生降解致使局部分子结构破坏而使营养价值和保健功能有所下降。利用有机酸提供酰基对黑米花色苷进行修饰来提高花色苷结构的稳定性。利用红外光谱分析经咖啡酸酰化修饰黑米花色苷的结构变化。结果表明：黑米花色苷酰化修饰前后于官能团区3 650~3 200和1 680~1 620 cm-1处均有吸收峰，且其于指纹区1 282.68和1 277.51 cm-1处出现酚羟基吸收峰，于1 056.07和1 054.03 cm-1处出现醇羟基吸收峰，719.90和719.71 cm-1处出现苯环上C-H面外弯曲振动吸收峰。由此可见，黑米花色苷酰化修饰后主要结构框架仍为花色苷的芳环结构。此外，黑米花色苷酰化修饰前后于1 900~1 650 cm-1间1 714.28和1 728.13 cm-1处均出现共轭羰基的特征吸收峰，对应于可直接连接在苯环上的α-羰基结构，由此说明黑米花色苷结构中存在着酰基基团。黑米花色苷经酰化修饰后红外图谱于1 517.20 cm-1处出现新吸收峰，其正好处于1 800~900 cm-1双键(不含氢)伸缩振动区，指纹区876.65 cm-1处亦出现了苯环上的C-H面外弯曲振动吸收峰。与之相呼应在经二阶导数处理后红外光谱图中在2 500～2 000 cm-1间出现了新的波动，此波段为累积双键伸缩振动区，而官能团区3 650~3 200 cm-1间3 370.20 cm-1处的吸收峰正好处于多分子缔合区。由此可见，在咖啡酸作为酰基供体，酰化修饰黑米花色苷时由于分子间的重新缔合于结构中引入了新的酰基基团而呈现出一种双酰化的空间结构。黑米花色苷酰化结构中有机酸与糖链相连，将有机酸置于2-苯基苯并吡喃骨架的表面，这种堆积作用模式可以较好地抵抗水的亲核攻击和其他降解反应进而提高黑米花色苷结构的稳定性。     

Designing a plano-convex aspheric lens for fiber optics collimator

A plano-convex aspheric lens is designed to collimate the emitted light of the fiber optics. In this paper even orders of general aspheres are used to describe the aspheric surfaces sag. To determine the aspheric coefficient, the even asphere polynomial are fitted on the computed sag data. The surface sag data is determined using genetic algorithm method. The surface sag was analyzed by the commercial optical software package ZEMAX. For typical fiber optics, the numerical aperture (NA) of 0.22 was assumed. With this specification, the expected output spot diagram of 20 mm and the maximum aperture of 25.4 mm have been obtained. A comparison between here presented lens and the similar type of conventional lens has been carried out; the proposed aspheric lens corrected the spherical aberration, which led to increase in the collimated distance.     

Z-scan analysis and ab initio studies of β-BaTeMo2O9 single crystal

The Z-scan measurements for the non-centrosymmetric optical crystals β-BaTeMo₂O₉ (BTMO) were performed. The corresponding experiments were carried out using the 5 ns pulses of the second harmonic of a nanosecond Nd:YAG laser at the 532 nm wavelength. It was shown that the studied crystals possess promising third-order optical susceptibilities, which allow to use the crystal as optical limiters. The comparison with other oxide materials is presented. To clarify the origin of the observed effect, the electronic and optical properties of BTMO were calculated using the density functional theory (DFT)-based method. The performed calculations of the electronic and optical properties revealed certain peculiar features that can be suitable for the nonlinear optical applications. The relation between the observed nonlinear optical features and the calculated band structure is emphasized. The values of the calculated band gap and refractive index for β-BaTeMo₂O₉ are also reported.     

基于傅立叶变换的SVJ模型的欧式期权定价

为了更加精确的计算期权价格,将结合随机波动和跳扩散模型(以下简称SVJ模型)以更好的描述期权标的资产价格过程,然而这样的价格过程无法得到概率密度函数的封闭形式,而只能得到包含特殊函数和无限求和的复杂的表达式.不过它们的特征函数都是封闭且是唯一的,因而可以通过它们的特征函数,并运用两种傅立叶变换的方法来求出期权价格.其中FFT算法计算的结果将与Monte Carlo模拟得出的结果进行比较,然后再将SVJ模型的计算结果和Black-Scholes模型进行比较.     

Signal modeling using the gradient search

This letter presents a new method for continuous signal modeling. Firstly, the continuous signal can be represented as a function of the trigonometric functional extension (Fourier series). Fourier series of the signal are parameterized by the fundamental frequency and unknown parameters. Then, the gradient-based iterative identification algorithm is derived, for estimating parameters of the signal model with known and unknown frequencies, separately. Finally, the simulation results indicate that the proposed algorithm is effective.     

Analysis of the Chemical Composition of Red Pigments and Inks for the Characterization and Differentiation of Contemporary Prints

Prints are one of the most popular artistic forms. They consist of an original matrix that is printed on a paper support. The stamps are part of a series, and each series is composed of a particular number of prints. Many contemporary prints are made using oil inks and synthetic pigments (reds and yellows). Inks are mainly composed of pigments (organic or inorganic) and a binding medium. The analysis of inks has the potential to facilitate and complement the identification of stamps of different origins.

Fourier transform infrared spectroscopy (FTIR) and Scanning Electron Microscopy-Energy Dispersive X-ray (SEM-EDX) are techniques that are typically available in museums and centers related to the study of works of art. Both can be classified as micro-destructive and provide complementary information about the organic and some inorganic compounds (FTIR), and the elemental composition (SEM-EDX). In this article, the two techniques were used to analyze the composition of red ink in prints. As a result of these analyses, it was possible to distinguish among nearly all of the pigments and inks, indicating that the composition of the red ink can be reliably used to differentiate between stamps of different origins in a series of prints.     

New method to solve electromagnetic parabolic equation

This paper puts forward a new method to solve the electromagnetic parabolic equation （EMPE） by taking the vertically-layered inhomogeneous characteristics of the atmospheric refractive index into account. First, the Fourier transform and the convo- lution theorem are employed, and the second-order partial differential equation, i.e., the EMPE, in the height space is transformed into first-order constant coefficient differential equations in the frequency space. Then, by use of the lower triangular characteristics of the coefficient matrix, the numerical solutions are designed. Through constructing ana- lytical solutions to the EMPE, the feasibility of the new method is validated. Finally, the numerical solutions to the new method are compared with those of the commonly used split-step Fourier algorithm.