Continuous chemiluminescence determination of formaldehyde in air based on Trautz-Schorigin reaction

A new continuous method for the determination of formaldehyde in air is described. A cylindrical wet effluent diffusion denuder is used for the collection of formaldehyde from air into a thin film of absorption liquid (distilled-deionized water). Formaldehyde in the denuder concentrate is on-line detected employing a chemiluminescence flow method based on a reaction of formaldehyde and gallic acid with hydrogen peroxide in an alkaline solution. The collection efficiency of formaldehyde is quantitative at the air flow rate of 0.5 L min⁻¹ (absorption liquid flow rate of 336 μL min⁻¹). The limit of detection (S/N = 3) is 0.60 μg m⁻³ HCHO (0.49 ppb). The calibration graph is linear up to 300 μg m⁻³ HCHO (244 ppb). The relative standard deviations of chemiluminescence method for 1 × 10⁻⁶ and 5 × 10⁻⁶ M HCHO are 2.87% and 1.49%, respectively. Acetaldehyde interferes negligible, other compounds do not interfere. The method was employed for formaldehyde measurement in ambient air. The comparison measurement illustrates the good agreement of results obtained by proposed method with those obtained by reference fluorimetric method.     

高效液相色谱法测定密胺餐具中甲醛单体迁移量

采用高效液相色谱法测定密胺餐具中的甲醛迁移量。样品经乙酸(4+96)溶液浸泡提取后,加入2,4-二硝基苯肼,与浸泡液中的甲醛反应生成2,4-二硝基苯腙,以C18色谱柱为分离柱,以甲醇-水(7+3)溶液为流动相进行等度洗脱,检测波长为350 nm。甲醛的质量浓度在0.01~40.0 mg·L-1范围内呈线性,测定下限(10S/N)为0.01 mg·L-1。对空白样品进行加标回收试验,回收率在99.8%~101%之间,相对标准偏差(n=10)均不大于0.6%。方法适用于密胺餐具中甲醛迁移量的检测。     

Picomole‐level Formaldehyde Determination in Gaseous and Beer Samples Using Flow Injection Chemiluminescence Analysis

Based on the linear enhancement of formaldehyde (FA) within 7.0 ～ 1000 pmol l^?1 on luminol—bovine serum albumin (BSA) chemiluminescence (CL) system, FA determination in air and beer samples using CL with flow injection (FI) was proposed. The detection limit was 2.5 pmol l^?1 (3σ) and the relative standard deviations were less than 4.5% (n = 7). At a flow rate of 2.0 mL min^?1, a whole analysis from sampling to washing only needed 32 s, offering a sample throughput of 112 h^?1. This proposed method was successfully utilized to determine FA vapor pressure in liquid (121.8 ± 3.8 Pa), FA content in real air sample (8.93 ± 0.03 mg m^?3), and FA levels in beer (199.5 ± 5.6 ～ 225.2 ± 3.5 mg l^?1), giving determination recoveries from 90.7% to 109.3%. The mechanism of BSA—FA interaction was also investigated, showing FA binding to BSA was a spontaneous process mainly through hydrogen bonding and van der Waals force by FI‐CL, with binding constant K of 1.89 × 10⁶ l mol^?1 and the number of binding sites n of 0.86. Molecular docking analysis further revealed FA could enter into the pocket at subdomain IIA of BSA, with K of 1.71 × 10⁵ l mol^?1 and ΔG of ‐29.68 kJ mol^?1.     

比久农药中游离偏二甲肼的高效液相色谱快速测定

建立了用甲醛衍生测定农药比久样品中微量的偏二甲肼的方法。采用甲醛与偏二甲肼柱前衍生,在室温、中性溶液中反应10 min,生成确定量的有较强紫外吸收的偏二甲腙,不须富集可直接用HPLC法测定偏二甲肼。研究了甲醛与偏二甲肼的反应条件及产物的光谱特征,测得衍生物的最大吸收波长λmax=237 nm和表观摩尔吸光系数ε=3.6×103(L.mol-1.cm-1),选定ZorbaxODS色谱柱,V(磷酸盐缓冲溶液,pH 7)∶V(甲醇)=94∶6为流动相,检测波长为237 nm。结果表明:在0.56~960μg/mL范围内回归方程为:A=0.4677ρ-0.2790,R2=0.9998,检出限为1.3μg/g,回收率为97.5%~103.4%,相对标准偏差为0.9%~1.8%。     

Silver nanoparticle decorated poly(2-aminodiphenylamine) modified carbon paste electrode as a simple and efficient electrocatalyst for oxidation of formaldehyde

This work describes the promising activity of silver nanoparticles on the surface of a poly(2-amino diphenylamine) modified carbon paste electrode (CPE) towards formaldehyde oxidation. Electrodeposition of the conducting polymer film on the CPE was carried out using consecutive cyclic voltammetry in an aqueous solution of 2-aminodiphenylamine and HCl. Nitrogen groups in the polymer backbone had a Ag ion accumulating effect, allowing Ag nanoparticles to be electrochemically deposited on the surface of the electrode. The electrochemical and morphological characteristics of the modified electrode were investigated. The electro-oxidation of formaldehyde on the surface of electrode was studied using cyclic voltammetry and chronoamperometry in aqueous solution of 0.1 mol/L NaOH. The electro-oxidation onset potential was found to be around -0.4 V, which is unique in the literature. The effect of different concentrations of formaldehyde on the electrocatalytic activity of the modified electrode was investigated. Finally, the diffusion coefficient of formaldehyde in alkaline media was calculated to be 0.47 × 10^-6 cm²/s using chronoamperometry.     

基于电纺丝法的In2O3/CdO复合材料的制备及甲醛气敏特性

用静电纺丝法制备了In(NO₃)₃/聚乙烯吡咯烷酮(PVP)纺丝前驱物, 然后分别在500、600、700℃时烧结得到三种In₂O₃ 纳米纤维. 通过X 射线衍射(XRD)仪、热重差热分析(TG/DTA)、场发射扫描式电子显微镜(FE-SEM)表征结果得知, 500℃时In₂O₃的晶相已经形成, 且粒径为最小, 约为24 nm, 纳米纤维呈介孔结构.将三种烧结温度的In₂O₃纤维制作成气敏元件, 测试对比了三种元件对甲醛气体的敏感特性, 结果表明, 500℃烧结得到的In₂O₃纳米纤维在工作温度为240℃时响应最好, 对浓度为10×10^-6 (体积分数, φ)甲醛的响应为7.用静电纺丝法合成了CdO 纳米颗粒, 通过XRD、SEM 表征得知CdO 呈粒径约为68 nm 的颗粒. 将In₂O₃和CdO以不同摩尔比(1:1, 10:1, 20:1)复合, 对比测试了纯In₂O₃及三种In₂O₃/CdO复合材料对应的气敏元件对甲醛的气敏特性, 测试结果表明当In₂O₃纳米纤维与CdO纳米颗粒以摩尔比10:1 复合时, 元件的工作温度较低(200℃), 且对甲醛表现出最佳的气敏特性, 对浓度为10×10^-6甲醛的响应为13.6, 响应/恢复时间为140 s/32s. 最后对不同摩尔比复合的In₂O₃/CdO对甲醛的气敏机理进行了初步分析.     

化学动力学中隧道效应的研究（Ⅱ）──甲醛单分子反应渠道间的相互作用研究

对甲醛单分子热反应模拟给出了分子渠道Ｅｃｋａｒｔ垒，计算了该渠道在不同温度下的隧道校正因子，研究了分子渠道与游离基渠道间的相互作用，计算了存在反应渠道间相互作用时各渠道的Ｋ＿（ｕｎｉ）（ｉ）、Ｅａ（ｉ），分子渠道考虑隧道效应，而游离基渠道无隧道效应，计算结果与实验结果一致。     

高效液相色谱直接测定甲醛衍生物反应条件的研究

研究了直接用于液相色谱测定甲醛与2,4-二硝基苯肼的反应条件,使反应在弱酸性和50％的乙腈条件下进行,反应产物甲醛衍生物不需要有机溶剂萃取,可直接用于液相色谱分析,避免了萃取过程的损失。该反应条件与传统的在强酸性条件下的反应进行比较。本实验所研究的反应条件用于液相色谱测定甲醛具有操作方便、准确和应用范围广等特点。在样品中添加5．14,10．28和51．4mg/kg,回收率分别为108％、93．1％和86．2％相对标准偏差(n=10)分别为1．13％、1．34％和1．29％。     

动力学光度法测定痕量甲醛

在稀硫酸溶液中,甲醛对KClO3氧化罗丹明6G褪色反应有催化作用,研究了其动力学条件,建立了测定痕量甲醛的动力学光度分析方法,线性范围为0.02～1.8μg/mL,检出限为1.5×10-8g/mL。该法用于湖水、饮料和漆料中痕量甲醛的测定,标准加入回收率为93.8%～108.5%,RSD为2.6%～3.4%。     

流动注射化学发光测定水杨酸

基于在甲醛存在下 ,水杨酸与KMnO4在酸性介质中直接化学发光反应 ,建立了测定水杨酸的流动注射化学发光的方法 ,该法测定水杨酸的线性范围为5 .0× 1 0 -7～ 1 .0× 1 0 -3 mol L ,检出限为 3.0× 1 0 -7mol L ,相对标准偏差为 2 0 %(水杨酸 5 .0× 1 0 -5mol L ,n =1 1 )。该法已应用于脚癣药水中水杨酸的测定。