Isotope dilution-thermal ionisation mass spectrometric analysis for tin in a fly ash material

Isotope dilution-thermal ionisation mass spectrometry (ID-TIMS) analysis has been applied to the determination of tin in a fly ash sample supplied by the EC Joint Research Centre (Ispra, Italy). The proposed procedure includes the silica gel/phosphoric acid technique for tin thermal ionisation activation and a strict heating protocol for isotope ratio measurements. Instrumental mass discrimination factor has been previously determined measuring a natural tin standard solution. Spike solution has been prepared from ¹¹²Sn-enriched metal and quantified by reverse isotope dilution analysis. Two sample aliquots were spiked and tin was extracted with 4.5 M HCl during 25 min ultrasound exposure time. Due to the complex matrix of this fly ash material, a two-step purification stage using ion-exchange chromatography was required prior TIMS analysis. Obtained results for the two sample-spike blends (10.11 ± 0.55 and 10.50 ± 0.64 μmol g⁻¹) are comparable, both value and uncertainty. Also a good reproducibility is observed between measurements. The proposed ID-TIMS procedure, as a primary method and due to the lack of fly ash reference materials certified for tin content, can be used to validate more routine methodologies applied to tin determination in this kind of samples.     

电感耦合等离子体原子发射光谱(ICP-AES)法测定粉煤灰中的铝

采用碳酸钠-碳酸钾-硼酸分解试样,盐酸浸取,电感耦合等离子体原子发射光谱法测定粉煤灰中的铝含量.铝的测定范围5.00％～25.00％.经加标回收实验,铝元素的加标回收率为99.6％～106％(n=3),方法准确简单,适用于粉煤灰中铝的测定.     

粉煤灰基氧氟沙星分子印迹聚合物的制备及其应用

以工业废料粉煤灰微球为基质,氧氟沙星 (OFL) 为模板分子,采用表面印迹法制备印迹材料MIP。通过紫外光谱法结合理论分析选择实验条件,并对该印迹材料结构、吸附行为进行研究。结果表明,该印迹材料对氧氟沙星具有良好的特异识别性和优良的亲和性。与以硅胶为载体制备的印迹聚合物相比,该材料吸附容量更高和印迹效果更好。将其作为固相萃取填料对鸡产品进行分离富集,与C18柱相比,分离富集效果更好。结合UPLC,对实际样品中氧氟沙星进行分析,回收率为82.0%-96.7%,相对标准偏差低于5.5%,可用于鸡产品中氧氟沙星分离分析。     

基于激光诱导击穿光谱(LIBS)的煤灰熔点快速检测

炉内结渣是影响火电机组和气化工艺可靠运行的关键因素之一,准确预测灰熔点可以提前调整炉膛出口温度以避免结渣。本论文采用激光诱导击穿光谱（LIBS）采集煤灰样中金属元素的光谱,分别建立煤灰中的金属元素的谱线强度与煤灰熔点的随机森林模型、支持向量机回归模型和线性回归模型,直接预测煤灰熔点温度。采用基于马氏距离(MD)的异常数据剔除算法和基于稀疏矩阵的基线估计与降噪算法（BEADS）,对粉煤灰样的全光谱数据进行了预处理。随机森林模型对粉煤灰熔点的预测平均相对误差（MRE）为54.74%,支持向量机回归模型的预测平均相对误差为60.08%,而线性回归模型的预测平均相对误差达到了9.78%。研究结果表明,线性回归模型对煤灰熔点的预测结果更准确。     

Metal fractionation of atmospheric aerosols via sequential chemical extraction: a review

This review surveys schemes used to sequentially chemically fractionate metals and metalloids present in airborne particulate matter. It focuses mainly on sequential chemical fractionation schemes published over the last 15 years. These schemes have been classified into five main categories: (1) based on Tessiers procedure, (2) based on Chesters procedure, (3) based on Zatkas procedure, (4) based on BCR procedure, and (5) other procedures. The operational characteristics as well as the state of the art in metal fractionation of airborne particulate matter, fly ashes and workroom aerosols, in terms of applications, optimizations and innovations, are also described. Many references to other works in this area are provided.     

Determination of polychlorinated biphenyls in ash using dimethylsulfoxide microwave assisted extraction followed by solid-phase microextraction

A procedure for the determination of several coplanar and non coplanar PCBs in ash samples is described. Analytes were extracted from the samples using dimethylsulfoxide (DMSO) under the action of a microwave field, and then they were concentrated on a PDMS-DVB solid-phase microextraction (SPME) fibre using the headspace mode, after water dilution of the DMSO extract. Determinations were carried out using GC-ECD and GC-MS detection. Influences of microwave extraction (solvent volume, temperature and time) and SPME conditions (stirring, kind of SPME fibre, salt and water addition, sampling time and temperature) on the performance of the whole analytical procedure were systematically investigated. Working under optimal conditions quantification limits from 0.2 to 1.5 ng g⁻¹ were obtained for all the compounds, except for PCB 209, which could not be consistently extracted from the sample using the proposed conditions.     

Withering timings affect the total free amino acids and mineral contents of tea leaves during black tea manufacturing

The aim of the present study was to investigate the effect of withering timings (i.e. 0, 21, 22, 23 and 24 h) on the moisture, total free amino acids, ash, essential and toxic mineral element contents of tea (Camellia sinensis L.) leaves during black tea manufacturing. Moisture, ash, Na, P, Mg, Cu, Zn, Mn, Al, Ni and Pb contents were significantly (P < 0.05) affected by withering, whereas non-significant (P > 0.05) results were noted for total free amino acids, K, Fe and Cd contents. The highest moisture content (76.4%) was examined in fresh leaves that progressively decreased to 63.8% in 24 h withering. Total free amino acid contents gradually increased up to 23 h and then decreased. Ash, P, Cu, Zn and Mn contents showed an increasing trend with withering time. Conversely, significantly lowered amounts of Na (162.5 mg/kg) and Mg (803 mg/kg) were recorded in tea leaves after 24 h withering. Among the toxic elements, Al, Ni and Pb contents were progressively increased over withering time. It was concluded that tea is a potential source of essential chemical constituents and during processing proper care should be taken to produce high quality black tea.     

A technique for sequential leaching of coal and fly ash resulting in good recovery of trace elements

Coal and fly ash contain many elements. These elements exist in different forms which may change throughout the coal combustion process. There are several processes, including X-ray techniques and leaching techniques by which studies have attempted to assess the form of a particular element in a sample. This work focuses on determining the leachability of selected elements sequentially leached in four extraction solutions: water, 1 M ammonium acetate, 3 M hydrochloric acid and 50% hydrofluoric acid. The emphasis is on evaluating the steps involved in the leaching process with the mass recovery for each element being the basis for evaluation. The total amount of each element that will leach out under the given extraction condition is presented as a fraction of the total present in the material. The materials evaluated were NIST coal and fly ash standards. The elements measured in this study include aluminum, barium, beryllium, calcium, chromium, cobalt, iron, magnesium, manganese, nickel, potassium, sodium, strontium, vanadium and zinc.     

Effect of filler content on the stress relaxation behavior of fly ash/polyurea composites

In this study, fly ash/polyurea (FA/PU) composites of various fly ash volume fractions were fabricated. The time-domain stress relaxation behaviors of pure polyurea and the FA/PU composites were measured by dynamic mechanical analysis (DMA) in tension mode at various temperatures. Both temperature and volume fraction of fly ash can affect the segmental motion of polyurea as well as the interaction between fly ash hollow spheres and polyurea matrix, which constitutes the intrinsic mechanism of stress relaxation. Master curves of relaxation modulus were constructed and compared for PU and FA/PU composites. A model was proposed to relate the relaxation modulus and volume fraction of fillers based on three-parameter fractional derivative model and Mori-Tanaka model. The numerical predictions obtained from the model are found to be in good agreement with the experimental results.     

Green Synthesis of Magnetic Zeolite LTA using NaOH Activated Fly Ash

The magnetic zeolite LTA was successfully synthesized using NaOH activated fly ash. The properties of the magnetic zeolite LTA were characterized by XRD, FTIR, SEM, TEM, BET, and VSM. We can be concluded that the synthesized composite consists of zeolite LTA and magnetic Fe₃O₄ nanoparticle. The nitrogen adsorption technique confirmed that the magnetic zeolite LTA exhibits a specifific surface area of 10.0183 m² · g^–1, which is much larger than that of the fly ash. VSM result confirms that the magnetization saturation value of the magnetic zeolite LTA is 10.06 emu · g^–1. Therefore, the magnetic zeolite LTA could be easily separated from the liquid phase using a magnet.