测量不同质量圆盘下圆盘的转动惯量误差的研究

实验由三线摆法测量物体的转动惯量,现在采用累积放大法测量周期,用平均值计算周期,分析圆盘转动惯量测量值及理论值的百分差与下圆盘质量之间的关系,从而来研究一定高度不同质量圆盘下圆盘转动惯量产生的误差影响。最后得出实验结果,下圆盘质量越小,误差越小,当下圆盘质量小于0.085kg时,误差突然增大。     

基于子模型法的带有表面裂纹钢丝应力强度因子研究

钢丝裂纹应力强度因子是进行钢丝疲劳断裂寿命评估、疲劳裂纹扩展分析和钢丝断裂强度评估等工作的重要参数。本文首先介绍了裂纹扩展分析软件FRANC3D,然后基于子模型法模拟研究了拉伸荷载作用下带有表面裂纹钢丝的应力强度因子,裂纹种类包括直线形裂纹和半圆形裂纹,最后拟合得到拉伸荷载作用下带表面裂纹钢丝的应力强度因子形状修正系数表达式,分析了利用该公式进行承载力评估时产生误差的原因。研究结果表明,利用子模型模拟分析拉伸荷载作用下带有表面裂纹的钢丝应力强度因子时计算精度高,计算速度快,对计算机硬件要求低;利用该方法得到的钢丝裂纹应力强度因子,在进行索承式桥梁吊索安全性能评估时,评估结果更精确。     

Binding energy of the donor impurities in GaAs-Ga_(1-x)Al_xAs quantum well wires with Morse potential in the presence of electric and magnetic fields

The behavior of a donor in the GaAs–Ga_(1-x)Al_xAs quantum well wire represented by the Morse potential is examined within the framework of the effective-mass approximation. The donor binding energies are numerically calculated for with and without the electric and magnetic fields in order to show their influence on the binding energies. Moreover, how the donor binding energies change for the constant potential parameters(De, re, and a) as well as with the different values of the electric and magnetic field strengths is determined. It is found that the donor binding energy is highly dependent on the external electric and magnetic fields as well as parameters of the Morse potential.     

Static lateral stiffness of wire rope isolators

This paper presents an analytical model for the static lateral stiffness of Wire Rope Isolators (WRI). The wire rope isolator, which is a passive isolation device, has been widely adopted as a shock and vibration isolation for many types of equipment and lightweight structures. The major advantage of the WRI is its ability to provide isolation in all three planes and in any orientation. The WRI in the lateral roll mode, is required to possess the required lateral stiffness to support and isolate the equipment effectively. The static lateral stiffness of WRI depends mainly on the geometrical characteristics and wire rope properties. The model developed in this paper is validated experimentally using a series of monotonic loading tests. The flexural rigidity of the wire ropes, which is required in the model, was determined from the transverse bending test on several wire rope cables. It was observed that the lateral stiffness is significantly influenced by the wire rope diameter and height of the isolator. The proposed analytical model can be used for the evaluation of lateral stiffness and in the preliminary design of the WRI.     

Theoretical Analysis of Spectral Correlations Between Photon Pairs Generated in Nanoscale Silicon Waveguides

Spontaneous four wave mixing in nonlinear waveguide is one of the excellent technique for generating photon pairs in well-defined guided modes. Here we present a comprehensive study of the frequency characteristic of correlated photon pairs generated in telecom C-band from a dispersion-engineered silicon wire waveguide. We have demonstrated that the waveguide configuration, shape of pump pulse, two-photon absorption as well as linear losses have significant influences on the biphoton spectral characteristics and the amount of frequency entanglement generated. The superior performance as well as the structural compactness and CMOS compatibility makes the silicon wire waveguide an ideal integrated platform for the implementation of on-chip quantum technologies.     

量子线,量子点和它们的激光器

介绍了半导体量子线、量子点的自组织生长法和掩膜表面选择局部生长法，讨论了量子线、量子点激光器的优点以及遇到的问题，指出了大小均匀性是实现量子线、量子点激光器的主要障碍．     

Geometry and Mechanics of Uniform n-Plies: from Engineering Ropes to Biological Filaments

We study the mechanics of uniform n-plies, correcting and extending previous work in the literature. An n-ply is the structure formed when n pretwisted strands coil around one another in helical fashion. Such structures are encountered widely in engineering (mooring ropes, power lines) and biology (DNA, proteins). We first show that the well-known lock-up phenomenon for n=2, described by a pitchfork bifurcation, gets unfolded for higher n. Geometrically, n-plies with n>2 are all found to behave qualitatively the same. Next, using elastic rod theory, we consider the mechanics of n-plies, allowing for axial end forces and end moments while ignoring friction. An exact expression for the interstrand pressure force is derived, which is used to investigate the onset of strand separation in plied structures. After defining suitable displacements we also give an alternative variational formulation and derive (nonlinear) constitutive relationships for torsion and extension (including their coupling) of the overall ply. For a realistic loading problem in which the ends are not free to rotate one needs to consider the topological conservation law, and we show how the concepts of link and writhe can be extended to n-plies. This revised version was published online in July 2006 with corrections to the Cover Date.     

Coated wire chromium(III) ion-selective electrode based on azamacrocycles

Tetraazacyclotetradecane, tetratosyltetraaza 12C4, and tritosyltriaza 9C3 have been explored as electroactive materials for preparing coated wire ion-selective electrodes (CWISEs) for Cr(III) ions. The best performance was observed for the membrane comprising electroactive material (tetratosyltetraaza 12C4), plasticizer (dibutyl phthalate), and poly(vinyl chloride) in the optimum ratio 5:60:35 (w/w). Linear Nernstian response for this electrode was obtained over the total Cr(III) concentration range of 1×10^–1 to 1×10^–7 M in 0.05 M NH₄NO₃ medium, with a slope of 20±1 mV per decade change. The working pH range of the electrode was 1.8–5.5. Selectivity coefficients of some mono, divalent, and trivalent metal ions were determined. Analyses of electroplating bath solutions, chromating, and effluent samples have been carried out using this CWISE and the results are found to be comparable with those obtained by using conventional methods or by AAS.     

Optical and electronic properties of single modulation doped GaAs/AlGaAs V-grooved quantum wire modified by ion implantation

1 Introduction Recently, there is considerable interest in the fabrication and study of quasi-one di-mensional quantum wires (QWRs) due to their potential application for novel optoelec-tronic devices such as QWR laser array [1,2] etc. Among the various techniques devel-oped for producing quasi-one dimensional (quasi-1D) QWRs, the self-organized growth on patterned substrates has been proven to be one of the most promising methods, due to the simplicity of fabrication[3―5]. The QWR is fa…     

Adhesion between Epoxy-Polysulfone Blends and Fibers

The adhesive strength of a fiber-polymer interface is determined, where epoxy resin blends and linear heat-resistant thermoplastics - polysulfone (PSF) and polyetherimide (Ultem) - are used as matrices. Steel wire and polyamide (nylon-6) fibers are taken as reinforcing fillers. It is shown that the addition of PSF to epoxy resin results in a maximum on the concentration curve corresponding to a 10% PSF content. It is also found that the adhesive strength of the ED-20+Ultem-steel wire interface is practically independent of the modifier content under low (up to 10%) Ultem concentrations.