Photophysics of Fluorescent Contact Sensors Based on the Dicyanodihydrofuran Motif

Fluorescent molecular rotors have been used for measurements of local mobility on molecular length scales, for example to determine viscosity, and for the visualization of contact between two surfaces. In the present work, we deepen our insight into the excited-state deactivation kinetics and mechanics of dicyanodihydrofuran-based molecular rotors. We extend the scope of the use of this class of rotors for contact sensing with a red-shifted member of the family. This allows for contact detection with a range of excitation wavelengths up to ∼600 nm. Steady-state fluorescence shows that the fluorescence quantum yield of these rotors depends not only on the rigidity of their environment, but – under certain conditions – also on its polarity. While excited state decay via rotation about the exocyclic double bond is rapid in nonpolar solvents and twisting of a single bond allows for fast decay in polar solvents, the barriers for both processes are significant in solvents of intermediate polarity. This effect may also occur in other molecular rotors, and it should be considered when applying such molecules as local mobility probes.     

Exploiting Protein N-Terminus for Site-Specific Bioconjugation

Although a plethora of chemistries have been developed to selectively decorate protein molecules, novel strategies continue to be reported with the final aim of improving selectivity and mildness of the reaction conditions, preserve protein integrity, and fulfill all the increasing requirements of the modern applications of protein conjugates. The targeting of the protein N-terminal alpha-amine group appears a convenient solution to the issue, emerging as a useful and unique reactive site universally present in each protein molecule. Herein, we provide an updated overview of the methodologies developed until today to afford the selective modification of proteins through the targeting of the N-terminal alpha-amine. Chemical and enzymatic strategies enabling the selective labeling of the protein N-terminal alpha-amine group are described.     

Revisiting the Rate-Limiting Step of the ANS–Protein Binding at the Protein Surface and Inside the Hydrophobic Cavity

8-Anilino-1-naphthalenesulfonic acid (ANS) is used as a hydrophobic fluorescence probe due to its high intensity in hydrophobic environments, and also as a microenvironment probe because of its unique ability to exhibit peak shift and intensity change depending on the surrounding solvent environment. The difference in fluorescence can not only be caused by the microenvironment but can also be affected by the binding affinity, which is represented by the binding constant (K). However, the overall binding process considering the binding constant is not fully understood, which requires the ANS fluorescence binding mechanism to be examined. In this study, to reveal the rate-limiting step of the ANS–protein binding process, protein concentration-dependent measurements of the ANS fluorescence of lysozyme and bovine serum albumin were performed, and the binding constants were analyzed. The results suggest that the main factor of the binding process is the microenvironment at the binding site, which restricts the attached ANS molecule, rather than the attractive diffusion-limited association. The molecular mechanism of ANS–protein binding will help us to interpret the molecular motions of ANS molecules at the binding site in detail, especially with respect to an equilibrium perspective.     

A Novel Fluorescent Probe for ATP Detection Based on Synergetic Effect of Aggregation-induced Emission and Counterion Displacement

In this work,a fluorescent probe(TPEBe-I)was developed for adenosine triphosphate(ATP)detection based on the synergetic effect of aggregation-induced emission and counterion displacement.TPEBe-I gave weak emission in aqueous solution due to the heavy-atom effect of counter iodide ion.However,upon the addition of ATP,the new aggregate complex(TPEBe-ATP)was formed between the cationic unit of TPEBe-I and ATP through electrostatic interactions,which not only restricted the intramolecular motion of luminogen but also eliminated the quenching effect of iodide ion.As a result,the fluorescent light-up detection for ATP was successfully achieved.Moreover,TPEBe-I exhibited high selectivity towards ATP and showed a wide linear detection region towards the logarithm of ATP concentration(5—600μmol/L)with a detection limit of 1.0μmol/L,enabling TPEBe-I as a promising probe for ATP quantitative analysis.     

甚高频激发容性耦合氩等离子体的电子能量分布函数的演变

甚高频激发的容性耦合等离子体由于离子通量和能量的相对独立可控而受到人们的关注. 本文采用朗缪尔探针诊断技术测量了40.68 MHz激发的容性耦合Ar等离子体的特性(如电子能量概率分布、电子温度和密度等)随宏观参量的演变情况. 实验结果表明, 电子能量概率分布随着气压的增加从双麦克斯韦分布逐步转变为单麦克斯韦分布并最终演变为Druyvesteyn分布, 而射频激发功率的增加促进了低能电子布居数的增强; 在从等离子体放电中心移向边界的过程中, 低能电子的布居数显著下降, 而高能电子的布居则有所上升; 放电极板间距的变化直接导致了等离子体中电子加热模式的转变. 另外, 我们也对等离子体中的高低能电子密度和温度的分配情况进行了讨论.     

基于拉锥结构的全光纤型内窥OCT探针研究

本文报道了一种基于拉锥结构的全光纤型内窥光学相干层析成像探针. 基于大纤芯多模光纤的低光束发散特性, 使用大纤芯多模光纤代替透镜作为成像元件, 并在单模光纤与大纤芯多模光纤之间引入过渡拉锥段以减少插入损耗. 首先利用光学仿真软件(Rsoft)确定探针的最佳结构, 然后通过拉锥、切割以及熔接工艺实现探针制作, 并对探针的出射光束特性与插入损耗进行测量, 最后将该探针与扫频光学相干层析成像主系统联机, 对人体指尖皮肤及鸡气管壁组织进行成像. 该探针直径为250 μm, 不锈钢保护管外径为325 μm, 硬端长度1 cm, 插入损耗约为0.3 dB, 空气中有效成像范围达800 μm. 该探针为内窥光学相干层析成像技术在心血管疾病的应用提供了高紧凑度、高传输效率与高灵活性的选择.     

纳米表面相互作用及振动测头模型

如何实现高精度的测量是现代制造业及微电子技术领域的热点问题之一. 基于微纳米测头的三坐标测量机是当前实现高精度测量的重要手段. 随着测量尺寸的减小, 常用的纳米/微纳尺度的测头与待测表面之间形成静态接触, 其表面相互作用成为了影响其测量精度和可靠性的关键因素之一. 本文基于一种触发式振动测头, 研究了其动力学模型, 并通过对测头纳米尺度表面相互作用的理论分析及数值模拟, 确立了测头振动参数与表面相互作用之间的关联. 实验研究表明, 参数优化后的谐振微纳测头能有效抑制表面作用带来的干扰, 提高测量精度.     

Manganese-enhanced magnetic resonance microscopy of mineralization

Paramagnetic manganese (II) can be employed as a calcium surrogate to sensitize magnetic resonance microscopy (MRM) to the processing of calcium during bone formation. At high doses, osteoblasts can take up sufficient quantities of manganese, resulting in marked changes in water proton T(1), T(2) and magnetization transfer ratio values compared to those for untreated cells. Accordingly, inductively coupled plasma mass spectrometry (ICP-MS) results confirm that the manganese content of treated cell pellets was 10-fold higher than that for untreated cell pellets. To establish that manganese is processed like calcium and deposited as bone, calvaria from the skull of embryonic chicks were grown in culture medium supplemented with 1 mM MnCl(2) and 3 mM CaCl(2). A banding pattern of high and low T(2) values, consistent with mineral deposits with high and low levels of manganese, was observed radiating from the calvarial ridge. The results of ICP-MS studies confirm that manganese-treated calvaria take up increasing amounts of manganese with time in culture. Finally, elemental mapping studies with electron probe microanalysis confirmed local variations in the manganese content of bone newly deposited on the calvarial surface. This is the first reported use of manganese-enhanced MRM to study the process whereby calcium is taken up by osteoblasts cells and deposited as bone.     

Fluorescent Probe ABM for Screening Gastrointestinal Patient’s Immune State

The fluorescent probe-aminoderivative of benzanthrone, ABM (developed at Riga Technical University, Riga, Latvia) was used to characterize the membranes of lymphocytes of cancer patients: 46 patients with gastrointestinal diseases, 13 patients having different primary localizations with massive metastases and intoxication. Patients were divided into three groups: (1) with decreased fluorescence intensity, (2) normal fluorescence intensity, (3) increased fluorescence intensity. The lymphocytes distribution among subsets differed between groups, in correspondence to the level of florescence intensity. Surgical treatment affected the main immunological parameters and elevated the functional activity of lymphocytes. In the advanced tumors group, fluorescence intensity correlates with the survival rate. Results suggest that determination of lymphocytes functional activity by ABM can aid evaluation of the immune status in cancer patients.     

电子回旋共振离子源等离子体的密度测量

 诊断电子回旋共振离子源等离子体的传统方法是采用传统的单探针无发射时测量伏安曲线,并根据曲线的拐点由理论公式计算出的等离子体密度。本文设计并研制了等离子体密度的测量装置。采用单根朗缪尔探针（该探针可以用来发射电子）测量等离子体的伏安特性。在探针有发射和无发射两种状态下测量得到两条伏安曲线,根据这两条曲线的"分叉点"得到等离子体电位,然后根据该电位直接由计算机计算出电子温度、电子密度。采用该新方法,测量得到的等离子体参量空间电位约为17 V,悬浮电位约为-5 V,电子温度约为4.4 eV,离子密度为1.10×10¹¹cm^-3,与传统方法计算出的等离子体1.12×10¹¹cm^-3相比,两者相差仅1.8％,但新方法效率和精度更高。