Nucleophilic substitution of nitro groups by [F]fluoride in methoxy-substituted ortho-nitrobenzaldehydes—A systematic study

As model reactions for the introduction of [¹⁸F]fluorine into aromatic amino acids, the replacement of NO₂ by [¹⁸F]fluoride ion in mono- to tetra-methoxy-substituted ortho-nitrobenzaldehydes was systematically investigated. Unexpectedly, the highly methoxylated precursors 2,3,4-trimethoxy-6-nitrobenzaldehyde and 2,3,4,5-tetramethoxy-6-nitrobenzaldehyde showed high maximum radiochemical yields (82% and 48% respectively). When the electrophilicity of the leaving group substituted carbon atom is expressed by its ¹³C NMR chemical shift a good correlation with the reaction rate at the beginning of the reaction (first min) was found (R² = 0.89), whereas the maximum radiochemical yields correlated much poorer with this electrophilicity parameter. This may be caused by side reactions becoming influencial in the further reaction course. As possible side reactions the demethylation of methoxy groups and intramolecular redox reactions could be detected by HPLC/MS.     

Hydrothermal syntheses, structures, and magnetic properties of (NH4)2NaVF6 and Na3VF6

The single crystals of perovskite fluorides (NH₄)₂NaVF₆ and Na₃VF₆ were synthesized under mild hydrothermal conditions. The structures of the compounds were determined by means of single-crystal and powder X-ray diffraction analyses, respectively. (NH₄)₂NaVF₆ has a cubic elpasolite-type structure and crystallizes in the space group with lattice constant a=8.495(0) Å. Rietveld refinement indicates that Na₃VF₆ has a monoclinic structure and is in space group P2₁/n. The compounds were characterized by scanning electron microscopy, thermogravimetric and differential thermal analysis, and variable temperature magnetic susceptibility. With the temperature decreasing, the magnetic studies of the compounds showed the magnetic ordering was related to the crystallographic features and isolated magnetic units.     

An inhibition type amperometric biosensor based on tyrosinase enzyme for fluoride determination

In this study, a new biosensor based on the inhibition of tyrosinase for the determination of fluoride is described. To construct the biosensor tyrosinase was immobilized by using gelatine and cross-linking agent glutaraldehyde on a Clark type dissolved oxygen (DO) probe covered with a teflon membrane which is sensitive for oxygen. The phosphate buffer (50 mM, pH 7.0) at 30 °C were established as providing the optimum working conditions. The method is based on the measurement of the decreasing of dissolved oxygen level of the interval surface that related to fluoride concentration added into reaction medium in the presence of catechol. Inhibitor effect of fluoride results in decrease in dissolved oxygen concentration. The biosensor response depends linearly on fluoride concentration between 1.0 and 20 μM with a response time of 3 min.In the characterization studies of the biosensor some parameters such as reproducibility, substrate specificity and storage stability were carried out. From the experiments, the average value (x), Standard deviation (S.D) and coefficient of variation (C.V %) were found as 10.5 μM, ± 0.57 μM, 5.43%, respectively for 10 μM fluoride standard.     

[H3tren] templated iron fluorides; synthesis, crystal structures and Mössbauer studies

The hydrothermal synthesis, using tris-(2-ethylamino)amine (tren) as a template, and the crystal structures of three new hybrid iron fluorides, (H₃O)₂·[H₃tren]₂·(FeF₆)₂·(FeF₅(H₂O))·2H₂O (I), [H₃tren]₂·(FeF₆)₂·(FeF₂(H₂O)₄)·8H₂O (II) and [H₃tren]₂·(FeF₆)·(F)₃·H₂O (III), are reported. I, II, and III are triclinic (P-1), monoclinic (P2₁/c) and orthorhombic (I222), respectively. The structure of I is built up from isolated FeF₆ and FeF₅(H₂O) distorted octahedra separated by triprotonated [H₃tren]³⁺ cations, disordered H₃O⁺ cations and H₂O molecules. In II, Fe^IIIF₆ and neutral [Fe^IIF₂(H₂O)₄] octahedra form, together with [H₃tren]³⁺ cations, infinite (100) layers separated by extra water molecules. The structure of III consists of isolated and disordered FeF₆ octahedra, fluoride anions F⁻ connected to [H₃tren]³⁺ cations and extra fluoride anions F⁻ disordered with H₂O molecules. All [H₃tren]³⁺ cations have a “spider” type conformation. ⁵⁷Fe Mössbauer characterization shows that +III valence state can only be considered for iron cations in I and III and preliminary Mössbauer results are consistent with the presence of both +II and +III valences for iron cations in II, in agreement with the crystallographic results.     

Organotin compounds: an ionophore system for fluoride ion recognition

Ion-selective properties were established for membrane electrodes prepared by using organotin compounds of type (L^CNRSnF₂)_n, (R = n-Bu (I), = Ph (II)) and (L^CNSnF₃)_n (III) (L^CN = C₆H₄(CH₂NMe₂)-2). Electrodes formulated with the optimized membranes containing the organotin compounds I-III as ionophores and sodium tetraphenylborate (10-30%) exhibited high selectivity for fluoride over other anions. An electrode prepared with ionophore II using dibutyl phthalate as the plasticizer and 15% sodium tetraphenylborate (NaTPB) as anion additive, possesses the best potentiometric response characteristics. It shows a detection limit of 7.9 × 10⁻⁷ M with a slope of 62.7 mV decade⁻¹ of activity in buffer solutions of pH 5.5. The interference from other anions is suppressed under this optimized measurement conditions. An entirely non-Hofmeister selectivity sequence (F⁻ > CH₃COO⁻ > Cl⁻ > I⁻ ∼ Br⁻ >ClO₄⁻ > NO₂⁻ > NO₃⁻ > SCN⁻) with remarkable preference towards fluoride is obtained. The influence on the electrode performances by anion additive was studied, and the possible response mechanism was investigated by UV-vis spectra. The electrode has been used for direct determination of fluoride in drinking mineral water with satisfactory results.     

Crystal structure and vibrational properties of new luminescent hosts K3YF6 and K3GdF6

The luminescence hosts K₃YF₆ and K₃GdF₆ were obtained in a single-crystal form. Their crystal structure was determined from single-crystal X-ray diffraction data. Both crystals adopt monoclinic system with space group P2₁/n, Z=2. Lattice parameters for K₃YF₆ are refined to the following values , , , β=90.65(3) and for K₃GdF₆, , , β=90.80(3). The vibrational analysis, IR and Raman spectroscopy at room temperature, was applied to these compounds in order to study the site symmetry of Y³⁺ and Gd³⁺ ions.     

X-ray crystal structures and solution dynamics of sodium organofluorotitanates [Na{Ti2(C5Me5)2F7}] and [NaTi6(C5Me5)5F20(H2O)]·(THF)

[Na{Ti₂(C₅Me₅)₂F₇}] (1) was prepared from sodium fluoride and [{Ti(C₅Me₅)F₃}₂] [H.W. Roesky, et al., Angew. Chem. Int. Ed. Engl. 31 (1992) 864-866]. The solid-state 1 consists of a polymeric chain of two rows of dititanate anions [Ti₂(C₅Me₅)₂F₇]⁻ connected by sodium ions in the middle of the chain. Each sodium ion is coordinated by five fluorine atoms from three [Ti₂(C₅Me₅)₂F₇]⁻ anions. The variable-temperature ¹⁹F NMR of CD₃CN solution of 1 revealed interconversions of monomeric species [Na(CD₃CN)_n{Ti₂(C₅Me₅)₂F₇}] (1solv) with different number of CD₃CN ligands on the sodium ion. The addition of HMPA to the CD₃CN solution of 1 allows ¹⁹F NMR observation of 1·HMPA (1a) and 1·HMPA·CD₃CN (1b) in the slow exchange. The solid-state structure of [NaTi₆(C₅Me₅)₅F₂₀(H₂O)]·(THF) (2·THF) reveals the sodium ion coordinated by four fluorine atoms from the anion [Ti₂(C₅Me₅)₂F₇]⁻ and by three fluorine atoms from the cluster [Ti₄(C₅Me₅)₃F₁₃(H₂O)].     

The Use of Zirconyl Xylenol Orange for the Post-Column Spectroscopic Detection of Fluoride in Ion Chromatrography

Abstract

A simple post column reaction detection system for fluoride is presented using the decolorization of the zirconyl xylenol orange complex. A 3[sgrave] detection limit of 0.05 μg F^? mL^?1 was achieved with a linear calibration function up to 10 μg F^? mL^?1. The methodology is suitable for the determination of F^? in potable water and some interferences studies were conducted with common cations namely Ca, Mg, Al and Fe(III).     

Xylenol Orange,Zirconium(IV) and Fluoride Color Reaction in Mixed Micelles of N-Hexadecylpyridinium Chloride and Brij 35, and Its Analytical Application1

Abstract

The color reaction between Xylenol orange (XO), zirconium (IV) and fluoride ions in the presence of various surfactants alone or in combination was studied at various pH. The XO -zirconium)IV)-fluoride ion ternary complex in mixed micellar media containing a low concentration of N-hexadecylpyridinium chloride (HPC) as a cationic surfactant and large amounts of (poly{oxyethylene)dodecyl ether (Brij 35) as a nonionic surfactant at weakly acidic media was found to be the most stable, and showed a remarkable bathochromic shift and clear contrast against a reagent blank. The maximum absorbance was at 600 nm in the mixed micellar media at pH 3.5, and the apparent molar absorptivities at 600 nm were 7.0 × 10⁴ 1 mol^?1 cm^?1 for zirconium(IV) and 1.4 × 10⁴ 1 mol^?1 cm^?1 for fluoride ion. The calibration curves covered the ranges of 0.5 ～ 20.0 μg/10 ml zirconium! IV) and 0 ～ 20.0 μg/10 ml fluoride ion with the Sandell sensitivities being 0.0013 μg/cm² for zirconium(IV) and 0.0016 μg/cm² for fluoride ion.     

非溶剂致相分离法制备PVDF膜影响因素探究

非溶剂致相分离法作为制备聚偏氟乙烯（PVDF）膜一种常用的方法已得到广泛推广,但因影响其成膜因素诸多,至今没有一种较好的协同效果．作者介绍了不同溶剂、聚合物的浓度、添加剂的种类和浓度、凝胶浴的组成和温度、蒸发时间及后处理等制膜条件对膜的影响,以期为优化制膜工艺提供参考．