A New Fluorescence Turn-On Probe for Aluminum(III) with High Selectivity and Sensitivity,and its Application to Bioimaging

The development of novel selective probes with high sensitivity for the detection of Al³⁺ is widely considered an important research goal due to the importance of such probes in medicine, living systems and the environment. Here, we describe a new fluorescent probe, N′-(4-diethylamino-2-hydroxybenzylidene)-2-hydroxybenzohydrazide (1), for Al³⁺. Probe 1 was evaluated in a solution of acetonitrile/water (1:1 v/v). Compared with previously reported probes for Al³⁺, probe 1 can be synthesized easily and in high yield. A Job plot confirmed that probe 1 is able to complex Al³⁺ in a 1:1 ratio, and the binding constant was determined to be 4.25×10⁸ m⁻¹. Moreover, the detection limit was as low as 6.7×10⁻⁹ m, suggesting that probe 1 has a high sensitivity. Common coexistent metal ions, such as K⁺, Co²⁺, Ca²⁺, Ba²⁺, Ni²⁺, Pb²⁺, Hg²⁺, Ce²⁺, Zn²⁺, Cd²⁺, Fe³⁺, showed little or no interference in the detection of Al³⁺ in solution, demonstrating the high selectivity of the probe. Finally, the ability of probe 1 to act as a fluorescent probe for Al³⁺ in living systems was evaluated in Gram-negative bacteria, Escherichia coli, and confocal laser scanning microscopy confirmed its utility. The results of this study suggest that 1 has appropriate properties to be developed for application as a fluorescent probe of Al³⁺ for use in biological studies.     

Fluorescence sensing of Cu within a pseudo 18-crown-6 cavity

We report herein a pseudo-crown based fluorescent receptor (1) for the selective detection of Cu²⁺ cation. Receptor 1 can detect Cu²⁺ even in 5 μM level in acetonitrile-water (9:1 v/v). Compound 1 is very effective for the detection of Cu²⁺ amongst the series of metal ions studied (Li⁺, Na⁺, K⁺, Ca²⁺, Mg²⁺, Ba²⁺, Pb²⁺, Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Hg²⁺ and Mn²⁺).     

荧光标记寡核苷酸的反相离子对色谱分析

建立荧光标记寡核苷酸反相离子对色谱分析方法,优化了流动相醋酸三乙胺浓度(0～0.15 mol/L), pH 4.5～7.0和洗脱强度等色谱条件.对5-mer, 10-mer和15-mer非标记和5'-羧基荧光素(5'FAM)标记寡核苷酸的保留进行比较分析,研究荧光标记寡核苷酸的保留机理,并分离TaqMan~(TM)探针等多种常用荧光标记寡核苷酸.结果显示,不同长度荧光标记寡核苷酸在0.01 mol/L醋酸三乙胺,pH 7.0的条件下获得最大分离.荧光标记寡核苷酸的保留与非标记寡核苷酸有明显差异,两者可完全分离.在一定长度范围内非标记寡核苷酸随长度的增加,保留时间增长;相反,荧光标记寡核苷酸的长度增加,保留时间减短.荧光染料疏水性对其标记的寡核苷酸在反相柱中的保留有较大影响,荧光染料疏水性越强,其标记寡核苷酸保留时间越长.但疏水性的影响程度随标记寡核苷酸长度增加而逐渐变小.     

Comparison between two anionic reverse micelle interfaces: the role of water-surfactant interactions in interfacial properties

The water/sodium bis(2-ethylhexyl) phosphate (NaDEHP) reverse micelle (RM) system is revisited by using, for the first time, molecular probes to investigate interface properties. The solvatochromic behavior of 1-methyl-8-oxyquinolinium betaine (QB) and 6-propionyl-2-(N,N-dimethyl)aminonaphthalene (PRODAN) in the water/NaDEHP/toluene system is studied, and the results are compared with those obtained in water/sodium 1,4-bis(2-ethylhexyl) sulfosuccinate (AOT)/toluene RM media. The results demonstrate that the micropolarity, microviscosity, interfacial water structure, molecular probe partition, and intramolecular electron-transfer processes are dramatically altered for NaDEHP RM interfaces in comparison to the AOT systems. Because of organic nonpolar solvent penetration into the interface, NaDEHP RM media offer an interface with lower micropolarity and microviscosity than AOT media. Also, the interfacial water in the NaDEHP system shows enhanced water-water hydrogen-bond interaction in comparison with bulk water. The AOT RM interface represents a unique environment for PRODAN to undergo dual emission.     

Fluorescence derivatisation of amino acids in short and long-wavelengths

3-(Naphthalen-1-ylamino)propanoic acid was coupled to the amino group of the main and lateral chains of various amino acids in order to evaluate its applicability as a fluorescent derivatising reagent. The resulting amino acid derivatives are strongly fluorescent with a maximum emission of about 415 nm. Condensation of these derivatives with 5-ethylamino-4-methyl-2-nitrosophenol hydrochloride resulted in the corresponding blue benzo[a]phenoxazinium conjugates, also revealing strong fluorescence in ethanol and water at physiological pH and good quantum yields, but with emission wavelengths between 644 and 657 nm, which was preferable in biological assays.     

Label-free molecular beacon system based on DNAs containing abasic sites and fluorescent ligands that bind abasic sites

A new class of label-free molecular beacon (MB) system based on DNA strands that contain abasic (AP) sites (AP-DNA) and adopt stem-loop structures, in combination with fluorescent ligands that bind these AP sites, has been developed. Unlike a conventional MB, which requires covalent labeling of the MB with a fluorophore and a quencher, the developed system (APMB) does not require covalent attachment of signal transduction units. Detailed sensing functions of a series of APMB systems were examined with the aid of the fluorescent ligand named ATMND to provide insight into the design strategy for APMB systems. The effects of the stem length and the position of the AP site in the stem moiety on the fluorescence response of the APMB system were examined. Genotyping of a G/C SNP of PCR amplification products was successfully demonstrated with the APMB system and blue-fluorescent ATMND as a ligand. The APMB system was further extended to a system that utilized green-fluorescent lumiflavin.     

Fluorescent Protein Capped Mesoporous Nanoparticles for Intracellular Drug Delivery and Imaging

A multifunctional system for intracellular drug delivery and simultaneous fluorescent imaging was constructed by using histidine‐tagged, cyan fluorescent protein (CFP)‐capped magnetic mesoporous silica nanoparticles (MMSNs). This protein‐capped multifunctional nanostructure is highly biocompatible and does not affect cell viability or proliferation. The CFP acts not only as a capping agent, but also as a fluorescent imaging agent. The nanoassembly was activated by histidine‐based replacement, leading to release of drug molecules encapsulated in the nanopores into the bulk solution. The fluorescent imaging functionality would allow noninvasive tracking of the nanoparticles in the body. By combining the drug delivery with cell‐imaging capability, these nanoparticles may provide valuable multifunctional nanoplatforms for biomedical applications.     

A mild high yielding synthesis of oxazole-4-carboxylate derivatives

Several 2,5-disubstituted oxazole-4-carboxylates were prepared in high yields from the methyl esters of N-acyl-β-halodehydroaminobutyric acid derivatives by treatment with a 2% solution of DBU in acetonitrile. The scope of this reaction was investigated and it was found that dehydrodipeptides having a β-bromodehydroaminobutyric acid residue gave the corresponding oxazoles in good yields. The photophysical properties of some of the oxazoles prepared were studied in four solvents of different polarity. All compounds have reasonable high fluorescence quantum yields and a moderate solvent sensitivity, which makes them good candidates to be used as fluorescent probes. One of the fluorescent oxazoles prepared was inserted after cleavage of the methyl ester into two model peptides using a conventional solution phase strategy. The photophysical properties of the labelled peptides were studied in ethanol and water and compared with those of the oxazole. The results obtained showed that the oxazole maintains a good fluorescence level and the same solvent sensitivity when linked to a peptide chain.     

Convenient synthesis of water-soluble nitrilotriacetic acid (NTA) BODIPY dyes

Mono- and bis-NTA-BODIPY dyes have been efficiently synthesized by amide bond formation between hepta-alkylated meso-aryl-BODIPY derivatives and the free amine of mono- and bis-NTA binder surrogates. These new fluorescent hybrids exhibited valuable photophysical properties under buffered aqueous conditions, thus expanding the arsenal of water-soluble BODIPY dyes for potential labeling and monitoring of biological systems and processes.