LiCoO2中锂离子固相扩散系数随循环次数的变化

The solid diffusion coefficient of lithium-ion in LiCoO₂ cathode material has been investigated by the capacity intermittent titration technique (CITT) at different voltages and at different charge/discharge cycles. By SEM, XRD and FTIR techniques, the structure of LiCoO₂ was studied before and after charge-discharge cycles, and the relationship between solid diffusion coefficient and crystal structure was further discussed. CITT results show that the value of Li⁺ solid diffusion coefficient of LiCoO₂ is about 10^-12 cm²·s^-1. During the whole charge-discharge cycles, the Li⁺ solid diffusion coefficient decreased within the voltage of 4.0～4.3 V, which is attributed to the change of the structure of LiCoO₂.     

铕离子探针研究Al2O3的相变过程

氧化铝具有许多重要的工业用途，而制备高热稳定活性氧化铝的技术也在不断地发展[1，2]，因此，研究其高温烧结下的相变过程很有意义．离子深法作为新型测试手段，已成功地用于生物大分子结构与功能研究方面［‘］，而在固体材料测试中的应用尚未见报道．我们以EU’“作为荧光探针，并结合＊＊D和＊nR研究了川对。在不同烧结温度下的相变过程．1实验部分样品的制备采用复盐分解法．先将Elf刀s用高纯硝酸溶解定容．以占AlzO。重量1％的量加入到硫酸铝锭溶液中，进行超声处理，冷冻干燥．再依次登于900”C、1000C、1100C、1200C的高温炉…     

Novel flow injection-fluorometric method for the determination of trace silicate and its application to ultrapurified water analysis

A highly sensitive fluorescence quenching method for the determination of silicate based on the formation of an ion associate between molybdosilicate and Rhodamine B (RB) in nitric acid medium was developed. A flow injection system coupled with a fluorescence detector was used for the measurement of fluorescence intensity at 560 and 580 nm as excitation and emission wavelengths, respectively. The calibration graph for Si showed a linear range of 0.1–5 ng cm⁻³ with correlation coefficient of 0.9999, and the detection limit of 0.06 ng cm⁻³. The proposed method was successfully applied to the determination of silicate in ultrapurified water with satisfactory results.     

N-取代N′-苯基哌嗪类化合物与硫杂蒽酮体系光诱导电子转移引发聚合体系的研究

本工作对N-苯基-N'-乙基呱嗪作为酮/胺光引发体系中组分之一的作用机制进行了研究。发现该特殊的胺类化合物虽包括二甲基苯胺和三乙胺两个部分,但它和酮类相组合形成的光引发体系只有较低的尤引发速率。对上述现象进行了讨论,并通过加入酸类化合物使其中一个胺发生季胺盐化,用以改进光引发效率来进一步证实文中所讨论的机制。     

铜表面腐蚀的激光扫描微区光电压图象的研究

铜表面腐蚀的激光扫描微区光电压图象的研究杨迈之，张雯，蔡生民，任聚杰（北京大学化学系，北京，１０００７１）（河北医学院化学系，石家庄）潘传智，杨勇（浙江工业大学化工系，杭州）（厦门大学化学系，厦门）关键词铜，缓蚀剂，微区光电压图铜的腐蚀与防腐早已引起...     

罗丹明B-Mo(V)-SCN~--PVA体系荧光熄灭法测痕量钼

在聚乙烯醇存在下,用罗丹明B-Mo(V)-SCN~-荧光熄灭法测Mo,能消除过量的SCN-对罗丹明B的熄灭作用。加入聚乙烯醇后体系的荧光熄灭倍数比未加入时大14倍。此法灵敏度高、稳定性好、操作简便,检测下限0.12ng/ml Mo.可用于测水和头发中的钼。     

Spectroscopic properties of Carcinus aestuarii hemocyanin and its structural subunits

Hemocyanin (Hc) of Carcinus aestuarii contains three major and one minor electrophoretically separable polypeptide chains which were purified by fast protein liquid chromatography (FPLC) ion exchange chromatography. N-terminal amino acid sequences of four structural subunits (SSs) from C. aestuarii were compared with known N-terminal sequences from other arthropodan hemocyanins. The conformational changes, induced by various treatments, were monitored by far UV, CD and fluorescence spectroscopy. The critical temperatures for the structural subunits, Tc, determined by fluorescence spectroscopy, are in the region of 52-59 degrees C and coincide with the melting temperatures, Tm (49-55 degrees C), determined by CD spectroscopy. The free energy of stabilization in water, delta GDH2O, toward guanidinium hydrochloride is about 1.3 times higher for the dodecameric Hc as compared to the isolated subunits and about one time higher for Cal, comparing with other SSs. The studies reveal that the conformational stability of the native dodecamer towards various denaturants (temperature and guanidinium hydrochloride) indicate that the quaternary structure is stabilized by oligomerization between structural subunits, and the possibility of a structural role of the sugar mojeties cannot be excluded.     

聚电解质溶液中2.6-ANS探针的荧光谱研究

本文合成了2.6—ANS荧光探针分子,并在含有不同外加盐的NaPSS溶液中测定了探针的荧光发射光谱。结果表明:探针的荧光强度随Cs增大而增大,而探针光谱的最大发射波长和半波宽度随Cs增大而减小。当Cs达到一定值时,荧光谱参数与Cs关系曲线出现转折点,此时聚离了链以“类胶束”状态存在。     

溶液酸度和反应温度对CaMoO4薄膜电化学制备的影响

本工作研究了恒电流电化学技术制备CaMoO₄薄膜工艺中，溶液酸度和反应温度对薄膜形成的影响。结果表明，酸度会影响薄膜的生长时间和光致发光特性，在较低酸度沉积薄膜时，容易造成薄膜的团簇生长和不确定相的形成；适当升高反应温度会加快晶粒的生长、提高薄膜的纯度、增加薄膜发射光谱的相对强度。在CaMoO₄薄膜电化学制备工艺中，溶液pH值控制在12.0附近和反应温度控制在60 ℃的左右比较好。