Biosensors based on gold nanoelectrode ensembles and screen printed electrodes

Gold nanowires were synthesized within polycarbonate membranes according to an electroless deposition method, obtaining nanoelectrode ensembles (NEEs) with special electrochemical features. NEEs were coupled with home-produced carbon graphite screen printed electrodes and the electrochemical properties of the original nanoelectrode ensemble on screen printed substrate (NEE/SPS) assembly has been tested for sensors application. Glucose oxidase has been used as model enzyme in order to verify the feasibility of disposable gold NEE/SPS biosensors. Finally, different immobilisation and electrochemical deposition techniques based on either self assembled monolayers of cysteamine (CYS) or amino-propyl-triethoxysilane (APTES) and conductive polyaniline (PANI) molecular wires were used. Spatial patterning of the enzyme on the polycarbonate surface and of PANI wires on gold nanoelectrodes was obtained. Possible direct electron transfer between the enzyme and the PANI modified gold nanoelectrodes has been evaluated.     

Catalyzation of 1,4-additions of arylboronic acids to α,β-unsaturated substrates using nickel(I) complexes

Nickel(I) complexes were generated in situ from Ni (PPh₃)₂Cl₂ using activated iron and the complexes combined with N,N′-bis(4-fluorobenzylidene) ethane-1,2-diamine (BFBED) were then used as a catalyst for the 1,4-addition reaction of arylboronic acids to α,β-unsaturated substrates. The reaction proceeded to completion and did not require the addition of a base but the addition of potassium iodide is crucial to this cross-coupling reaction. Moreover, experimental observations suggested a possible Ni(I)–Ni(III) catalytic cycle mechanism.     

On the induced‐fit mechanism of substrate‐enzyme binding structures of nylon‐oligomer hydrolase

We present a detailed computational investigation of the induced‐fit motion in a nylon‐oligomer hydrolase (NylB) upon substrate binding. To this aim, we resort on the recently introduced parallel cascade selection molecular dynamics approach, allowing for an accelerated access to the set of conformational changes from an open‐ to a closed‐state structure to form the enzyme‐substrate complex in a specific induce‐fit mechanism. The structural investigation is quantitatively complemented by free energy analyses within the umbrella sampling algorithm accompanied by weighted histogram analysis. We find that the stabilization free energy is about 1.4 kcal/mol, whereas the highest free energy barrier to be overcome is about 2.3 kcal/mol. Conversely, the energetic contribution for the substrate binding is about 20 kcal/mol, as estimated from Generalized Born/Surface Area. This means that the open‐close induced‐fit motion could occur frequently once the substrate binds to the open state of NylB. © 2014 Wiley Periodicals, Inc.     

Effects of substrate and transfer on CVD-grown graphene over sapphire-induced Cu films

We differentiated the effects of Cu films deposited on single crystalline a-,r-,and c-plane sapphire substrates upon graphene films synthesized with atmospheric pressure chemical vapor deposition(CVD).The data illustrate that the realization of high-crystalline Cu film is dependent not only on the crystallinity of underlying substrate,but also on the symmetric match of crystallographic geometry between metal film and substrate.We also systematically investigated the effects of PMMA removal on the Raman ID/IG and IG/I2D values of transferred graphene.The results reveal that different PMMA removal methods do not alter the ID/IG values;instead,the residue of PMMA increases the IG/I2D values and the thermal decomposition of PMMA leads to higher IG/I2D values than the removal of PMMA with acetone.The effects of PMMA removal on variations of the Raman spectra are also discussed.     

Nanoscale imaging of oxidized copper foil covered with chemical vapor deposition-grown graphene layers

Characterization of the geometrical and structural characteristics of oxidized Cu area in high resolution is crucial for tracking the change in morphology, exploring interactions between graphene layers and Cu substrates and revealing the mechanism for the orientation-dependent oxidation of Cu. Here, we reported experimental results on nanoscale imaging of natural oxidation of the polycrystalline Cu substrate coated by partial-coverage chemical vapor deposition (CVD)-grown graphene stored in dryer under ambient conditions for up to 10 months. Scanning electron microscope (SEM), together with atomic force microscope (AFM), Raman, and X-ray photoelectron spectroscopy (XPS), was used for systematically studying the morphological and compositional changes at nanoscale during oxidation. The appearance of oxidized Cu substrates could be unambiguously distinguished from the unoxidized regions based on their distinctly different morphologies in SEM images, and the underlying mechanism was discussed in detail. By analyzing a millimeter-seized polycrystalline Cu substrate, we found that the oxidation of polycrystalline Cu substrate depends sensitively on both orientation of graphene layers and Cu substrates. Furthermore, the time-dependent oxidation evolution of Cu substrate was also established, and the oxidation rate was readily determined. The findings reported here will have important implications for developing protection coatings for Cu.     

蚕丝基智能纤维及织物：潜力、现状与未来展望

纤维及织物因具有良好的柔性、透气性以及适宜的力学性能而成为人们日常生活必不可少的材料。随着柔性电子器件的快速发展,纤维及织物在其自身优势的基础上,开始被人们赋予智能化特征,使得智能纤维和织物逐渐在可穿戴领域占据一席之地。天然蚕丝具有产量大、机械性能优异和生物可降解的优势。近年来,面向智能应用的蚕丝基纤维与织物逐渐发展,被用于传感、致动、光学器件、能量收集和储能等领域。本文将首先介绍天然蚕丝的层级结构和性能,并介绍各种形貌结构的再生蚕丝材料;然后根据其在智能纤维及织物中应用领域的不同,详细阐述蚕丝基智能纤维及织物的制备方法、性能及工作机制;最后讨论进一步发展所面临的挑战与机会,并对未来前景进行展望。     

Recent progress in experiments for sessile droplet wetting on structured surfaces

Wetting of a sessile droplet on structured or patterned surface can be found in a broad range of applications. The researchers have been promoted to keep working on the topic. The review is on the basis of the recent experimental advances on the sessile droplet wetting on the hydrophobic, hydrophilic, or combined hydrophobic and hydrophilic surfaces under isothermal conditions, and on heating or cooling substrates having nonisothermal conditions. More attention has been paid on the wetting configuration between the sessile droplet and the structured substrate; the research gap has been discussed on identifying the three-phase line shape. Further, the three-dimensional measurement for the sessile droplets on the patterned surfaces with focusing more on the contact line of sessile droplets might reveal new physical insights. This review targets at building a holistic overview on the sessile droplet wetting behaviors on the structured substrate in the past 2 years.     

Inclined Substrate Deposition of Nanostructured TiO2 Thin Films for DSSC Application

Nanostructured TiO₂ films were deposited onto Indium Tin Oxide (ITO) and glass substrates by dc reactive magnetron sputtering at different substrate inclination angles. The structural and optical properties of the deposited films were studied by X-ray diffraction, scanning electron microscopy and UV–Vis spectrophotometer, respectively. Dye-sensitized solar cells (DSSC) were assembled using these TiO₂ films as photoelectrodes and the effect of the substrate inclination angle in the preparing process of TiO₂ films on the DSSC conversion efficiency was studied.     

Highly flexible,transparent, conductive and antibacterial films made of spin-coated silver nanowires and a protective ZnO layer

We prepared highly flexible, transparent, conductive and antibacterial film by spin coating a silver nanowire suspension on a poly (ethylene terephthalate) (PET) substrate. The ZnO layer covered the conductive silver nanowire (AgNW) network to protect the metal nanowires from oxidization and enhance both wire-to-wire adhesion and wire-to-substrate adhesion. It is found that the number of AgNW coatings correlates with both the sheet resistance (R_s) and the transmittance of the AgNW/ZnO composite films. An excellent 92% optical transmittance in the visible range and a surface sheet resistance of only 9 Ω sq⁻¹ has been achieved, respectively. Even after bending 1000 times (5 mm bending radius), we found no significant change in the sheet resistance or optical transmittance. The real-time sheet resistance measured as a function of bending radius also remains stable even at the smallest measured bending radius (1 mm). The AgNW/ZnO composite films also show antibacterial effects which could be useful for the fabrication of wearable electronic devices.