“东北水三七”中化学元素的分析

用原子吸收光谱法测下了“东北水三七”根、茎、叶的21种化学元素,结果表明,不同部位的元素含量有一定差别。     

偏最小二乘法在原子吸收光谱分析中的应用——钴和铟的同时测定

本文用偏最小二乘法（ＰＬＳ）校正了火焰原子吸收分析Ｉｎ２５２．１３７ｎｍ对Ｃｏ２５２．１３６ｎｍ的吸收线重叠干扰,对混合样中Ｃｏ和Ｉｎ的含量进行了测定,结果令人满意。     

Determination of heavy metal concentration in feed and permeate streams of polymer enhanced ultrafiltration process

Polymer enhanced ultrafiltration (PEUF) is a newly developed method for the removal of heavy metals from aqueous solutions. This method was applied for the removal of mercury and cadmium with the presence of polyethyleneimine (PEI) as a water soluble polymer. After ultrafiltration experiments for metal–polymer mixtures, two separate streams, namely, retentate and permeate, former of which contains mainly metal–polymer complex and free polymer molecules while latter of which mainly contains free metal ions, were obtained. At the end of PEUF experiments, performance of operation was determined by concentration analyses which was achieved by atomic absorption spectroscopy (AAS) applied in a different way for permeate and retentate streams considering the effect of presence of polymer. For mercury analysis, cold vapor AAS was applied. It was observed that the presence of PEI did not affect the atomic absorption signal when 10% HCl was added to the sample solutions. For calcium and cadmium, flame AAS was used. It was observed that change in PEI concentration results in change in measured concentration of calcium and cadmium. Therefore, two new approaches were developed for accurate measurement of concentrations of calcium and cadmium. It was also observed that presence of other metals did not affect the accuracy of the measurement of a particular metal in the concentration range studied.     

Neutron scattering study of pentanol solubilization in sodium octanoate micelles

We extend a previous small-angle neutron scattering study of sodium octanoate (NaC₈) micelles to the ternary system sodium octanoate/pentanol/water. The use of contrast variation through selective deuteration of individual components together with explicit computation of interference effects, permits us to deduce the location of pentanol (C₅OH) in the micelles. Our main conclusion is that, although the micelles grow as (C₅OH) is solubilised, there is no concomitant variation in the NaC₈ aggregation number. At low alcohol concentrations, the C₅OH is located near the NaC₈ polar heads, while at higher concentration the -OH groups are distributed throughout the micellar core.     

Determination of Y,Sm, Eu,Gd, Dy,Ho, Er in high purity terbium oxide by ICP-AES

Inductively coupled plasma atomic emission spectrometry (ICP-AES) was employed to determine Y, Sm, Eu, Gd, Dy, Ho and Er in high purity terbium oxide. Terbium oxide was dissolved in 0.5 mol/l HNO₃ and nebulized into the plasma generated by a 56 MHz RF generator at 1.5 kW output power. Using a Jobin-Yvon 1-m Czenry-Turner high resolution, high dispersion scanning monochromator, lines mutually interference-free as well as free of interference from the matrix Tb were chosen for the seven analytes. A set of standards containing the analytes in the concentration range 0.01–1.0 gmg/ml with 1 mg/ml Tb was used for calibration. It was necessary to apply background correction to the gross analyte line intensities in order to obtain linear calibration plots for the analytes.     

Organic molecular beam deposition of oligophenyls on Au111: A study by X-ray absorption spectroscopy.

Near-edge X-ray absorption fine structure (NEXAFS) spectroscopy has been applied to reveal the molecular arrangement of ultrathin oligophenyl films [p-quaterphenyl (4P) and p-hexaphenyl (6P)] on Au(111). In the half-monolayer films the molecules lie flat on the surface but still have a considerable inter-ring twist of 30 degrees -40 degrees , similar to the gas-phase conformation. In the saturated monolayer film the second half of the molecules is side-tilted by an angle of less than 66 degrees with respect to the surface. This arrangement is already similar to that in bulk net planes of thicker films parallel to the surface, that is, the 4P(211) and 6P(21-3) planes, respectively.     

The measurement of high proton affinities for a variety of metallic compounds: a new approach by flame-ion mass spectrometry

A small amount (≤ 10⁻⁶ mol fraction) of four alkaline earth metals, tin and yttrium were introduced into five, premixed, fuel-rich, H₂–O₂–N₂ flames at atmospheric pressure in the temperature range 1820–2400 K. Aqueous salt solutions of the metals were sprayed into the premixed flame gas as an aerosol using an atomizer technique. Ions in a flame were observed by sampling flame gas through a nozzle into a mass spectrometer. The concentrations of the major neutral metallic species present in the flame were calculated from thermodynamic data currently available. The principal metallic ions observed were AOH⁺ (A = Mg, Ca, Sr, Ba, Sn) and A(OH)₂⁺ (A = Y), formed initially by proton transfer to AO and OAOH from H₃O⁺, a natural flame ion. Except for Mg, the ions were also produced by chemi-ionization processes. By adjusting the concentration(s) of the salt solution in the atomizer, it was found that a pair of ions could be brought into equilibrium within the time scale of the flame; the pairs included H₃O⁺ with a metal ion or two metallic ions. Because water is a major product of combustion, a very large difference in proton affinity PA⁰(AO) − PA⁰(H₂O) ≤ 490 kJ mol⁻¹ (117 kcal mol⁻¹) could be attempted for the proton transfer equilibrium. Using PA⁰(H₂O) = 691.0 kJ mol⁻¹ (165.2 kcal mol⁻¹) as a reference base to anchor the proton affinity scale, ion ratio measurements led to proton affinity PA⁰ values of 766, 912, 1004, 1184, 1201, and 1222 kJ mol⁻¹ (183, 218, 240, 283, 287, and 292 kcal mol⁻¹) corrected to 298 K for OYOH, SnO, MgO, CaO, SrO, and BaO, respectively; of these, only the value for OYOH has not been reported previously. If it is assumed that the neutral thermodynamic data are correct (although some appear to be in error), the uncertainties in the PA results reported here are ± 21 kJ mol⁻¹ (5 kcal mol⁻¹). The realization that these equilibria can be achieved in flames provides a new approach to consolidate and build the high end of the proton affinity ladder, primarily of metallic species which are not accessible at lower temperatures.     

Mercury species immobilized on sulphydryl cotton: A new candidate reference material for mercury speciation

A batch of sulphydryl cotton microcolumns was prepared and charged with a mixed Hg standard solution (methyl-, ethyl- and inorganic Hg, 10 g l^–1 as Hg, 3 ml) and stored at 4 °C in a light-tight box. At regular time intervals over a 4 month period microcolumns were removed and Hg species were quantified by gas chromatography microwave-induced plasma atomic emission spectrometry (after elution, extraction and derivatization steps). It was found that analyte recoveries for methyl- and inorganic Hg were quantitative over the 4 month period while ethyl-Hg species appeared to be stable for up to 2 months.     

A novel intumescent flame-retardant system containing metal chelates for polyvinyl alcohol

A novel flame retardant containing phosphorous-nitrogen structure, the ammonium salt of 2-hydroxyl-5,5-dimethyl-2,2-oxo-1,3,2-dioxapho sphorinane (PNOH), was synthesized and its structure was characterized by ¹H NMR and FTIR spectra. PNOH was used together with ammonium polyphosphate (APP) to prepare a novel intumescent flame retardant (IFR) for polyvinyl alcohol (PVA). When a few amounts (0.5%) of metal chelates were added, the flame retardancy of the IFR-PVA systems was significantly improved, having a high LOI value of 34.2 in a total IFR loading of 15 wt.%. In order to have an understanding of the resulting flame retardant effects, the thermal degradation behaviors of IFR-PVA systems were investigated by thermogravimetric analysis (TGA), and the morphology and structures of residues generated in different conditions were investigated by scanning electronic microscopy (SEM) and FTIR spectra. The results show that NiSAO can promote the thermal stability of the IFR-PVA; the residual char containing polyphosphoric or phosphoric acid is formed during the combustion; the formation of a continuous and dense char layer could inhibit the transmission of heat during contacting with flame and shows good flame retardancy.