一种判断多项式函数极值点和拐点个数的简单方法

给出了判断一类多项式函数极值点和拐点个数的一种快捷方法,得到了几个相关结论,并通．过几个典型例题验证了该方法解题的有效性和快捷性．     

不同对流马赫数下光束畸变的实验研究

利用双曝光CCD相机成像技术,研究了小直径光束穿越可压缩混合层流场后所引起的气动光学效应.实验研究结果表明:在不同对流马赫数(Mc=0.17,0.45)下,光束投影(点扩散函数,PSF)发生了不同程度的变形和偏移.此外在不同对流马赫数下细光束投影都存在扩束、缩束和面积几乎不变的现象,但光束投影出现扩、缩束的概率不同.     

基于FPGA和DSP的微型惯导系统

 惯导系统的硬件组成直接影响到系统的体积和解算速度,构建合理的硬件系统直接关系到惯导系统的精度指标。针对某小型惯导系统对体积和解算精度的特殊要求,解决已有微型惯导系统的方案缺陷,提出一种工程实用强的惯导系统。该系统用FPGA作为采集控制惯性传感器的核心芯片,设计了并行采集方案,32位浮点型高速DSP实现惯导解算。经过转台测试与外场试验表明：系统具有抗干扰能力强、实时响应迅速、惯性单元标定简便、易实现等优点,系统指标完全满足原设计要求。     

基于DSP的高功率TEACO2激光器控制系统的高精度数据采集

针对基于DSP的高功率TEA CO2激光器控制系统直接利用DSP F2812内置A/D转换器（ADC）进行模拟量采样时存在转换误差较大,且模拟量易受电磁干扰等问题,从硬件和软件两个角度提出了校正DSP2812内置ADC的方法。硬件上采用硬件模拟滤波和隔离等手段对输入的模拟量进行处理;软件校正则通过将两路给定的参考电压值送入DSPF2812内置A/D转换器的两个转换通道,计算出ADC的偏置误差和增益误差,以此误差对其它通道A/D转换器进行校正。最后,实验分析了参考电压和A/D采样时钟频率对A/D转换精度的影响。结果表明,提出的方法能有效地提高A/D转换器的精度,A/D转换误差达到±3 LSB,特别是在对腔压值精度要求很高的0～12 000 Pa区段,A/D转换精度达±1 LSB,可以保证TEA CO2激光器的可靠运行。     

Vector Preisach hysteresis modeling: Measurement, identification and application

The paper presents a Preisach model to simulate the vector hysteresis properties of ferromagnetic materials. The vector behavior has been studied using a single sheet tester with a disk-shaped specimen at low frequency. The locus of the magnetic flux density vector has been controlled by a digital measurement system. An inverse vector Preisach hysteresis model has been developed and identified by applying the measured data. Finally, the inverse model has been inserted into a finite element procedure through the fixed point technique and the reduced magnetic scalar potential formulation to simulate the measurement system. The applicability of the measurement system as well as the developed model has been proven by comparing measured and simulated results.     

基于FPGA和DSP的超声波风向风速测量系统

本文研究了数字化超声风速测量系统,提出并实现了完整的系统设计方案。该方案的核心是基于现场可编程门阵列(FPGA)和数字信号处理器(DSP)的硬件系统架构和基于包络重心法的信号处理算法。该设计可实现超声信号的高速数据采集和复杂的信号处理算法。测试结果表明所实现的超声风速测量系统具有体积小、反应速度快、抗干扰能力强和分辨率高等优点,且具有成本优势,并保持较低的功耗。     

Shot noise suppression in a series graphene tunnel barrier structure

The shot noise properties in a graphene-based multi-quantum well structure are investigated theoretically. It is found that when the number of the potential barriers (quantum wells) is big enough and the width of the barriers and the wells is shorter than the mean free path, another Dirac-like point at which the Fermi energy equals half of the barrier height appears. The transport is almost forbidden at this new Dirac-like point, the conductivity gets the minimum, and the Fano factor approaches 1/3. With the random potential barrier being taken into consideration, the conductance enhances clearly, meanwhile the Fano factor is suppressed much more.     

An improved algorithm for detecting point of impact in anisotropic inhomogeneous plates

Conventional triangulation techniques fail to correctly predict the acoustic source location in anisotropic plates due to the direction dependent nature of the elastic wave speeds. To overcome this problem, Kundu et al. [1] proposed an alternative method for acoustic source prediction based on optimizing an objective function. They defined an objective function that uses the time of flight information of the acoustic waves to the passive transducers attached to the plate and the wave propagation direction (θ) from the source point to the receiving sensors. Some weaknesses of the original algorithm proposed in Ref. [1] were later overcome by developing a modified objective function [2]. A new objective function is introduced here to further simplify the optimization procedure and improve the computational efficiency. A new algorithm for source location is also introduced here to increase the source location accuracy. The performance of the objective function and source location algorithm were experimentally verified on a homogeneous anisotropic plate and a non-homogeneous anisotropic plate with a doubler patch. Results from these experiments indicate that the new objective function and source location algorithm have improved performance when compared with those discussed in Refs. [1] and [2].     

Vortex structures with complex points singularities in two-dimensional Euler equations. New exact solutions

In this work we present a new class of exact stationary solutions for two-dimensional (2D) Euler equations. Unlike already known solutions, the new ones contain complex singularities. We consider point singularities which have a vector field index greater than 1 as complex. For example, the dipole singularity is complex because its index is equal to 2. We present in explicit form a large class of exact localized stationary solutions for 2D Euler equations with a singularity whose index is equal to 3. The solutions obtained are expressed in terms of elementary functions. These solutions represent a complex singularity point surrounded by a vortex satellite structure. We also discuss the motion equation of singularities and conditions for singularity point stationarity which provide the stationarity of the complex vortex configuration.     

Spin compensation temperatures induced by longitudinal fields in a mixed spin-3/2 and spin-5/2 Ising ferrimagnet

I studied the ferrimagnetic Ising model with nearest neighbour interactions for a square lattice and simple cubic one, using mean field theory. The free energy of a mixed spin Ising ferrimagnetic model was calculated from a mean field approximation of the Hamiltonian. By minimizing the free energy, I obtained the equilibrium magnetizations and the compensation temperatures. Clear indications of the single-ion anisotropies on the compensation points of the mixed spin-3/2 and spin-5/2 ferrimagnetic lattices are found. Some interesting behaviors of these systems are obtained depending not only on the values of magnetic anisotropies for both sublattice sites but also on the lattice structure. The longitudinal magnetic fields dependence of the spin compensation temperature is the main focus of research. The possibility of many compensation temperatures is indicated.