Temperature‐modulated differential scanning calorimetry studies on the origin of double melting peaks in isothermally melt‐crystallized poly(L‐lactic acid)

In this work, the melting behaviors of nonisothermally and isothermally melt‐crystallized poly(L ‐lactic acid) (PLLA) from the melt were investigated with differential scanning calorimetry (DSC) and temperature‐modulated differential scanning calorimetry (TMDSC). The isothermal melt crystallizations of PLLA at a temperature in the range of 100–110 °C for 120 min or at 110 °C for a time in the range of 10–180 min appeared to exhibit double melting peaks in the DSC heating curves of 10 °C/min. TMDSC analysis revealed that the melting–recrystallization mechanism dominated the formation of the double melting peaks in PLLA samples following melt crystallizations at 110 °C for a shorter time (≤30 min) or at a lower temperature (100, 103, or 105 °C) for 120 min, whereas the double lamellar thickness model dominated the formation of the double melting peaks in those PLLA samples crystallized at a higher temperature (108 or 110 °C) for 120 min or at 110 °C for a longer time (≥45 min). © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 466–474, 2007     

Lanthanum nitrate decomposition by both temperature programmed heating and citrate gel combustion

Thermal decomposition of lanthanum nitrate to lanthanum oxide was carried out by both temperature programmed heating (TPH) and citrate-gel combustion. The temperature programmed heating was carried out under flow of oxidizing (air), neutral (nitrogen) and reducing (25 vol.% hydrogen+argone mixture) gases, and the processes were controlled by simultaneous thermogravimetry and differential thermal analysis. It was shown that hydrogen atmosphere helps to reduce temperatures of all decomposition steps. The results of TPH were utilized to check the nature of residues in the products of lanthanum nitrate-to-oxide conversion performed via citrate-gel combustion technique.     

Nonparametric estimation and adaptive control in a class of finite Markov decision chains

We consider a class of Markov decision processes withfinite state and action spaces which, essentially, is determined by the following condition: The state space isirreducible under the action of any stationary policy. However, except by this restriction, the transition law iscompletely unknown to the controller. In this context, we find a set of policies under which thefrequency estimators of the transition law are strongly consistent and then, this result is applied to constructadaptive asymptotically discount-optimal policies.Dedicated to Professor Truman O. Lewis, on the occasion of his sixtieth birthdayThis research was supported in part by the Third World Academy of Sciences (TWAS) under Grant TWAS RG MP 898-152, and in part by the Consejo Nacional de Ciencia y Tecnología (CONACYT) under Grant A128CCOEO550 (MT-2).     

Amine‐blocked polyisocyanates. I. Synthesis of novel N‐methylaniline‐blocked polyisocyanates and deblocking studies using hot‐stage fourier transform infrared spectroscopy

A series of substituted N‐methylaniline‐blocked polyisocyanates based on 4,4′‐methylenebis(phenyl isocyanate) and poly(tetrahydrofuran) were prepared and characterized thoroughly with FTIR, ¹H NMR, and ¹³C NMR spectroscopy methods. Compared with unsubstituted N‐methylaniline, a blocking agent with an electron‐releasing substituent at the para position took a shorter time, whereas those with an electron‐releasing substituent at the ortho position or an electron‐withdrawing substituent at the ortho and para positions took longer times for the blocking reaction. The thermal dissociation reactions of blocked polyisocyanates were carried out with an FTIR spectrophotometer attached to hot‐stage accessories under dynamic and isothermal conditions. The dynamic method was used to determine the deblocking temperature, and the isothermal method was used to calculate the deblocking kinetics and activation parameters. The cure times of blocked polyisocyanates with hydroxyl‐terminated polybutadiene were also determined. The deblocking temperatures, the results of cure‐time studies, and the kinetic parameters revealed that the thermal dissociation of the N‐methylaniline‐blocked polyisocyanates was retarded by electron‐donating substituents and facilitated by electron‐withdrawing substituents. The action of N‐methylanilines as blocking agents for isocyanate was explained by the formation of a four‐center, intramolecularly hydrogen‐bonded ring structure during the thermal dissociation of the blocked polyisocyanates. The formation of such a hydrogen‐bonded ring structure was confirmed and supported by variable‐temperature ¹H NMR studies and entropy parameters, respectively. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1557–1570, 2007     

Ag-Bi高温超导线材转变温度的测量

介绍了 Bi系银包套高温超导线材的电阻温度特性 ,用测电阻和电磁感应两种方法分别测量了材料的超导转变温度 ,电磁感应法测量曲线上台阶的出现表明材料中 Bi(2 2 2 3)和 Bi(2 2 12 )两相的存在。     

An exponentially fitted special second-order finite difference method for solving singular perturbation problems

An exponentially fitted special second-order finite difference method is presented for solving singularly perturbed two-point boundary value problems with the boundary layer at one end (left or right) point. A fitting factor is introduced in a tri-diagonal finite difference scheme and is obtained from the theory of singular perturbations. Thomas Algorithm is used to solve the system and its stability is investigated. To demonstrate the applicability of the method, we have solved several linear and non-linear problems. From the results, it is observed that the present method approximates the exact solution very well.     

Weighted extended b-splines for one-dimensional electromagnetic problems

This paper considers the weighted extended b-splines as basis function for finite element method in electromagnetics and compares with the standard finite element method applied to the two-point boundary value problems with different boundary conditions. This new approach, which provides more accurate results than standard finite element method, is presented to compare other numerical techniques and applied to one-dimensional electromagnetic problems. Computed results are compared with other numerical results in literature.     

25MeV/u6He+9Be反应的轻粒子发射

在25MeV/u ⁶He与⁹Be靶的反应中,107°和128°处明显地观察到了轻粒子发射.粒子能谱形状与平衡热源蒸发相一致,分析得到热源的核温度为完全熔合条件下的5.6MeV或非完全熔合条件下的5.2MeV .实验发现发射氚的数量特别大,这可能与目前广泛研究的⁶He的集团结构和同位旋效应有关.     

On a free group of transformations defined by an automaton

We prove that three automorphisms of the rooted binary tree defined by a certain 3-state automaton generate a free non-Abelian group of rank 3. Both authors are supported by the NSF grants DMS-0308985 and DMS-0456185. Yaroslav Vorobets is supported by a Clay Research Scholarship.     

不同温度均匀二半空间接触后产生的辐射场

 应用电磁线路中涨落耗散理论，推导了不同温度均匀二半空间接触后产生辐射场密度的公式。将此公式近似展开后，即得Grover和Urtiew所获得的表示式，不过多了一松弛项，该项如用非富里叶热传导理论推导，也是存在的。该结果和实验结果一致，不过这里的松驰时间可以应用介质性质进行计算。