硫化态K—Mo合成低碳醇催化剂的制备条件和载体效应研究

用浸渍法制备以KCl为助剂的ZrO_2、γ-Al_2O_3和SiO_2负载硫化态钼基催化剂,研究了钼和助剂钾两种组分浸渍顺序、助剂含量、载体差别以及浸渍溶液的酸碱性对催化剂上CO加氢合成低碳混合醇性能的影响。ZrO_2按先钼后钾、γ-Al_2O_3和SiO_2则按相反的顺序浸渍两种组分、且K/Mo原子比分别为0.5,0.8和1.0制备催化剂,其合成醇活性最佳。由于载体性质的差异,K-Mo/SiO_2、特别是K-Mo/ZrO_2的合成醇活性强烈依赖于钾助剂含量。而K-Mo/SiO_2在较宽的钾含量范围内,其活性差别不明显。适当选择较高碱性的浸渍溶液制备K-Mo/γ-Al_2O_3催化剂,有利于醇活性的提高。     

Ni-M/SiO2催化1,4-丁炔二醇加氢的金属助剂效应

以SiO₂气凝胶为载体,采用等体积浸渍法制备了Ni/SiO₂及不同金属助剂改性的Ni-M/SiO₂（M=Fe、Co、Cu）催化剂,利用ICP、BET、XRD、H₂-TPR、H₂-TPD等手段对催化剂进行了表征,考察了不同第二金属对催化剂结构与1,4-丁炔二醇加氢性能的影响.结果表明,第二金属与Ni物种具有不同程度的双金属协同效应,其中Cu的加入不仅能够提高Ni活性物种的分散度,而且Ni-Cu双金属间的相互作用改善了NiO物种的还原性能及氢活化能力,有利于氢和1,4-丁炔二醇在活性位点的快速转化.在反应温度50℃,氢压1 MPa,反应时间3 h的加氢评价条件下,15Ni5Cu/SiO₂催化剂不仅可以实现1,4-丁炔二醇的完全转化,而且能够有效降低难分离副产物2-羟基四氢呋喃的含量,具有最优的加氢活性和对1,4-丁烯二醇的选择性.     

介孔结构增强的Fe3O4超粒子@介孔SiO2的光热性能

采用湿化学法制备了多功能Fe₃O₄超粒子@介孔SiO₂复合材料.该纳米复合材料具有超顺磁性,在商用磁铁下可实现快速富集、分离.SiO₂的包覆增强了Fe₃O₄超粒子在近红外光区的吸收,提高了其光热性能;介孔结构的构建提高了近红外光的利用率,进一步提升了纳米复合物的光热性能,且介孔SiO₂的壳层越厚,光热性能越优.细胞实验结果表明,Fe₃O₄超粒子@介孔SiO₂在近红外光照射下具有较高的癌细胞杀伤能力.     

Ag3PO4溶解热力学函数的晶面效应与温度效应

在室温下制备了立方体{100}、 四面体{111}、 菱形十二面体{110}和块体Ag₃PO₄微晶, 并进行了表征. 测定了其在不同温度下水溶液中的电导率, 结合强电解质溶液和溶解热力学理论, 得到了Ag₃PO₄微晶的溶解热力学函数. 以具有不同晶面的Ag₃PO₄微晶为模型, 研究了纳米材料溶解热力学函数的晶面效应和温度效应. 结果表明, 具有{110}晶面的菱形十二面体Ag₃PO₄的标准摩尔溶解吉布斯自由能()、 标准摩尔溶解焓()和标准摩尔溶解熵()最大, 具有{100}晶面的立方体Ag₃PO₄次之, 具有{111}晶面的四面体Ag₃PO₄最小; 溶解平衡常数(K_{\mathrm{SP}})和随着温度的升高而增大.     

Combined effect of chemically compound graphene oxide‐calcium pimelate on crystallization behavior,morphology and mechanical properties of isotactic polypropylene

The combined nucleation effect of graphene oxide (GO) and calcium pimelate (CaPi) which are chemically compound together (expressed in GO ? CaPi) in isotactic polypropylene (iPP) was investigated. Fourier transform infrared (FTIR), X‐ray diffraction (XRD) and thermogravimetric analysis (TGA) verified that CaPi was chemically compound with GO by chelate bonds. The crystallization behavior and crystalline morphologies of iPP nucleated with different mass ratio of GO and CaPi were investigated. The crystallization peak temperature of iPP nucleated with 0.2 wt% GO ? CaPi with the mass ratio of 1:5 (GO1 ? C5) was increased by 8.3°C when compared with that of pure iPP, and the relative content of β‐crystal reached up to 0.7962. Whereas, the crystallization peak temperature of iPP nucleated with 0.2 wt% GO and CaPi which are blended together by mechanical force (expressed in GO + CaPi) with the mass ratio of 1:5 (GO1 + C5) was only increased by 5.0°C. It was attributed to that the aggregation of GO + CaPi caused the decrease of the crystallization peak temperature, while the GO1 ? C5 uniformly dispersed in the iPP matrix. Unexpectedly, the relative content of β‐crystal of iPP nucleated with 0.02 wt% GO1 ? C5 reached up to 0.8094, and the crystallization peak temperature was increased by 6.7°C compared with that of pure iPP. Meanwhile, the impact strength, tensile strength and heat deflection temperature of iPP nucleated with 0.02 wt% GO1 ? C5 increased by almost 45.86%, 2.03% and 7.7°C, respectively. The iPP nucleated with GO1 ? C5 obtained a balance between stiffness and toughness and the thermo‐mechanical property of nucleated iPP was improved.     

A Conjugated Polymer Containing Arylazopyrazole Units in the Side Chains for Field‐Effect Transistors Optically Tunable by Near Infra‐Red Light

Optically tunable field‐effect transistors (FETs) with near infra‐red (NIR) light show promising applications in various areas. Now, arylazopyrazole groups are incorporated in the side chains of a semiconducting donor–acceptor (D‐A) polymer. The cis–trans interconversion of the arylazopyrazole can be controlled by 980 nm and 808 nm NIR light irradiation, by utilizing NaYF₄:Yb,Tm upconversion nanoparticles and the photothermal effect of conjugated D‐A polymers, respectively. This reversible transformation affects the interchain packing of the polymer thin film, which in turn reversibly tunes the semiconducting properties of the FETs by the successive 980 nm and 808 nm light irradiation. The resultant FETs display fast response to NIR light, good resistance to photofatigue, and stability in storage for up to 120 days. These unique features will be useful in future memory and bioelectronic wearable devices.     

MXene-碳黑/硫复合材料在锂硫电池一体式电极的研究

锂硫电池的实际能量密度不高和多硫化物（LiPSs）的穿梭效应等问题严重影响了该电池的实际应用。本文通过将二维的Ti₃C₂T_x Mxene纳米片与碳黑/硫（CB/S）材料进行混合,制备了Ti₃C₂T_x-CB/S正极材料并将其涂覆在商业隔膜（PP）上,最终获得了Ti₃C₂T_x-CB/S-PP一体式电极并用于锂硫电池。利用Ti₃C₂T_x纳米片对CB/S进行修饰,不仅能提高活性物质硫的导电性,还能对扩散的LiPSs进行物理阻挡和化学吸附。而一体式电极的设计有利于提高电池的能量密度。恒流充放电测试结果表明,Ti₃C₂T_x-CB/S-PP电极在0.1 C电流下的初始放电容量为1028.8 mAh·g^-1,高于不含Ti₃C₂T_x的CB/S-PP电极的896.8 mAh·g^-1。Ti₃C₂T_x-CB/S-PP电极还展示出了比基于传统铝箔集流体的Ti₃C₂T_x-CB/S-Al电极更好的循环稳定性,前者在0.5 C下400圈长循环测试中的每圈衰减率为0.072%,而后者则为更高的0.10%。本文利用Ti₃C₂T_x-CB/S构建一体式电极的策略为实现高性能和高能量密度的锂硫电池提供了新的研究方向。     

基于认识化学正向价值的教学实践——以“二氧化碳*”为例

模拟大型科普求真类节目《是真的吗？》创设学习氛围;通过基于生活生产实际的“日常灭火可否用N₂代替CO₂”“深海捕获CO₂可否调控温室效应”“石油采矿业中,向油井下注射1吨CO₂可否增产原油3~5吨”“用石灰水可否保鲜鸡蛋”等4个核心问题及3个真假难辨的小问题,引导学生从化学的正向视角深刻认识二氧化碳的性质;利用移动磁贴板设计板书,引导学生经历并建构结构化知识体系。     

碳点的性质及其在生物传感器领域的应用

碳点(carbon dots,CDs)作为一种具有优良生物相容性、低毒性和表面功能可调的新型碳基纳米材料,在生物传感领域具有极大的应用潜力.本文对碳点的生物效应、发光性质及其发光机理进行了简述,并根据传感机制的不同,将CDs在生物传感领域的应用分为荧光(fluorescence,FL)传感器、电致发光(electroc...     

酞菁铁中N4-Fe2+的氧化还原化学和氧还原性能

准确理解金属大环配合物(如N4-Fe²⁺)体系的氧化还原化学性能,对氧还原反应(ORR)电催化剂的基础研究和合理设计具有重要意义.本文采用微波法将三种不同酞菁铁类金属大环配合物吸附在碳纳米管上,分别记为(NH2)4FePc@CNTs,(t-Bu)4FePc@CNTs和FePc@CNTs,考察了取代基对Fe³⁺/Fe²⁺氧化还原电位的影响,以及碱性介质中的氧还原反应催化活性.结果表明,FePc@CNTs,(t-Bu)4FePc@CNTs和(NH2)4FePc@CNTs的ORR起始电位分别为0.98,0.96和0.96 V,而半波电位(E1/2)由高到低的顺序为FePc@CNTs(E1/2=0.91 V),(t-Bu)4FePc@CNTs(E1/2=0.87 V),(NH2)4FePc@CNTs(E1/2=0.83 V).与20%Pt/C(E1/2=0.85 V)相比,FePc@CNTsFePc@CNTs具有优异的ORR性能.在活性、稳定性和耐甲醇性方面,FePc@CNTs复合材料比其他复合材料表现出更高的ORR性能.研究发现,FePc上的供电子基团可以显著改变N4-Fe²⁺活性位点的电子云密度,增加dz 2轨道(HOMO)的能量,并观察到Fe²⁺/Fe³⁺氧化还原电位显著向阴极方向移动.结果表明,取代基的高电子贡献能力降低了HOMO和LUMO(O2的杂轨道*-轨道)之间的电子耦合,从而降低了氧还原催化活性.因此,FePc框架外围的供电子基团对ORR不利.本文阐明了取代基电子效应-金属大环配合物氧化还原电位与ORR催化性能之间的关系,为ORR催化剂活性中心的构建和调控提供了借鉴.