压电材料椭圆夹杂界面开裂问题的电弹性耦合解

本文研究了在反平面剪切和面内电场的共同作用下，压电材料椭圆夹杂的界面开裂问题，假定夹杂是刚性的导体，采用复变函数保角变换和级数展开方法，可确定压电材料基体的复势表达式，进而求得夹杂界面开裂的电弹性耦合的能量释放率。     

On the Elastic Field of a Shpherical Inhomogeneity with an Imperfectly Bonded Interface

This study is devoted to the development of a unified and explicit elastic solution to the problem of a spherical inhomogeneity with an imperfectly bonded interface. Both tangential and normal displacement discontinuities at the interface are considered and a linear interfacial condition, which assumes that the tangential and the normal displacement jumps are proportional to the associated tractions, is adopted. The elastic disturbance due to the presence of an imperfectly bonded inhomogeneity is decomposed into two parts: the first is formulated in terms of an equivalent nonuniform eigenstrain distributed over a perfectly bonded spherical inclusion, while the second is formulated in terms of an imaginary Somigliana dislocation field which models the interfacial sliding and normal separation. The exact form of the equivalent nonuniform eigenstrain and the imaginary Somigliana dislocation are fully determined in this paper.     

Conservation laws of two coupled non-linear oscillators

This paper presents a novel approach to obtaining a complete set of time-dependent expressions for approximate conservation laws of two weakly non-linear coupled oscillators. The procedure developed for a non-resonant case is based on the field method concept of deriving a conservation law from an incomplete solution of a partial differential equation. Due to the non-linearity of the system being considered, this concept is combined with the multiple variable expansion procedure.     

Interaction between a screw dislocation and an elastic elliptical inhomogeneity with interfacial cracks

The elastic interaction between a screw dislocation and an elliptical inhomogeneity with interfacial cracks is studied. The screw dislocation may be located outside or inside the inhomogeneity. An efficient complex variable method for the complex multiply connected region is developed, and the general solutions to the problem are derived. As illustrative examples, solutions in explicit series form for complex potentials are presented in the case of one or two interfacial cracks. Image forces on the dislocation are calculated by using the Peach-Koehler formula. The influence of crack geometries and material properties on the image forces is evaluated and discussed. It is shown that the interfacial crack has a significant effect on the equilibrium position of the dislocation near an elliptical-arc interface. The main results indicate, when the length of the crack goes up to a critical value, the presence of the interfacial crack can change the interaction mechanism between a screw dislocation and an elliptical inclusion. The present solutions can include a number of previously known results as special cases.The project supported by the National Natural Science Foundation of China(10272009 and 10472030) and the Natural Science Foundation of Hunan Province(02JJY2014)     

On the modelling of dynamic problems for plates with a periodic structure

Summary The subject of analysis is the bending of elastic plates exhibiting a nonhomogeneous periodic structure and/or a periodically variable thickness in a certain direction parallel to the plate's midplane. The fundamental modelling problem is how to obtain an effective 2D-model of a plate under consideration, i.e., a 2D-model represented by PDEs with constant coefficients. This problem for periodic plates has been solved independently in [5] and [10], using asymptotic homogenization. However, homogenization neglects dynamic phenomena related to the plate's rotational inertia and cannot be applied to the analysis of higher-order vibration frequences. The main aim of this contribution is to formulate a new non-asymptotic effective 2D-model of a periodic plate which is free from the mentioned drawbacks and describes the dynamic behaviour of plates having the thickness of the order of the period length. The proposed model is applied to the analysis of some vibration problems.     

Axisymmetric problem of a nonhomogeneous elastic layer

Summary The paper deals with a theoretical treatment of elastic behavior for a medium with nonhomogeneous materials property, which is defined by the relation , i.e., shear modulus of elasticity G varies with the dimensionless axial coordinate by the power product form, arbitrarily. Fundamental differential equation for such nonhomogeneous medium has been already proposed in [5]. It is given by a second-order partial differential equation. However, it was found that the fundamental equation is not sufficient in general to solve several kinds of boundary-value problems. On the other hand, it is shown in the present paper making use of the fundamental equations system for a nonhomogeneous medium, which has been proposed in our previous paper [7], it is possible to solve axisymmetric problems for a thick plate (layer) subjected to an arbitrarily distributed load or a concentrated load on its surfaces. Numerical calculations are carried out for several cases, taking into account the variation of the nonhomogeneous parameter m. The numerical results for displacements stress and components are shown in graphical form. Accepted for publication 25 March 1997     

针对限制幅值磁共振脉冲的优化设计

在磁共振脉冲优化领域,优化脉冲普遍存在幅值过大的问题,这极大地限制了优化脉冲的使用范围。为了限制优化脉冲的幅值,扩大其应用范围,提出了一种基于L-BFGS-B数值算法的脉冲优化设计方法。首先基于Liouville-von Neuman方程,使用最优控制思想构建优化模型;然后使用L-BFGS-B算法,在限制幅值的条件下对优化模型进行数值迭代求解;最后以脉冲的激发效率以及激发轮廓的均匀性作为衡量优化脉冲优劣的标准对该方法进行仿真和实验验证。结果表明,采用该方法获得的优化脉冲在幅值被限制的前提下,仍能获得较传统磁共振脉冲更好的共振激发效果,进而增强信号的灵敏度,提高图像的质量。     

Rational strategy for characterization of nanoscale particles by asymmetric-flow field flow fractionation: A tutorial

This tutorial proposes a comprehensive and rational measurement strategy that provides specific guidance for the application of asymmetric-flow field flow fractionation (A4F) to the size-dependent separation and characterization of nanoscale particles (NPs) dispersed in aqueous media. A range of fractionation conditions are considered, and challenging applications, including industrially relevant materials (e.g., metal NPs, asymmetric NPs), are utilized in order to validate and illustrate this approach. We demonstrate that optimization is material dependent and that polystyrene NPs, widely used as a reference standard for retention calibration in A4F, in fact represent a class of materials with unique selectivity, recovery and optimal conditions for fractionation; thus use of these standards to calibrate retention for other materials must be validated a posteriori. We discuss the use and relevance of different detection modalities that can potentially yield multi-dimensional and complementary information on NP systems. We illustrate the fractionation of atomically precise nanoclusters, which are the lower limit of the nanoscale regime. Conversely, we address the upper size limit for normal mode elution in A4F. The protocol for A4F fractionation, including the methods described in the present work is proposed as a standardized strategy to realize interlaboratory comparability and to facilitate the selection and validation of material-specific measurement parameters and conditions. It is intended for both novice and advanced users of this measurement technology.     

Field-amplified online sample stacking capillary electrophoresis UV detection for plasma malondialdehyde measurement

Malondialdehyde (MDA) determination is the most widely used method for monitoring lipid peroxidation. Here, we describe an easy field-amplified sample injection (FASI) CE method with UV detection for the detection of free plasma MDA. MDA was detected within 8 min by using 200 mmol/L Tris phosphate pH 5.0 as running buffer. Plasma samples treated with ACN for protein elimination were directly injected on capillary without complex cleanup and/or sample derivatization procedures. Using electrokinetic injection, the detection limit in real sample was 3 nmol/L, thus improving of about 100-fold the LOD of the previous described methods based on CE. Precision tests indicate a good repeatability of our method both for migration times (CV = 1.11%) and for areas (CV = 2.05%). Moreover, a good reproducibility of intra- and inter-assay tests was obtained (CV = 2.55% and CV = 5.14%, respectively). Suitability of the method was tested by measuring MDA levels in 44 healthy volunteers.