Design of fiber Bragg grating-based Fabry–Perot sensor for simultaneous measurement of humidity and temperature

A new sensor for simultaneous measurement of humidity and temperature is proposed. The sensor consists of Fabry–Perot cavity formed by two identical uniform fiber Bragg gratings. To make the cavity serves as humidity sensor, moisture sensitive polymer, which is polyimide, is coated on the FBG and on the cavity with different thickness. When the sensor is exposed to the relative humidity change, the polyimide will expand and stretch the fiber and induces strain on the FBG and on the cavity. The induced strain alters the grating period, cavity length and effective refractive index of fiber. The simulation results show that the humidity sensitivity and thermal sensitivity are 1.92 pm/%RH and 8.87 pm/°C, respectively, for polyimide coating thickness of 10 μm on the FBG and 15 μm on the cavity.     

Study and design of a low cost optical pickup based on double FBGs

A fiber Bragg grating (FBG) pickup exploiting Intensity Modulation-Direct Detection (IM-DD) interrogation system was put forward in this paper. The feasibility of detecting the vibration of the guitar was revealed by FFT analysis. There was certain correlation between the FBG pickup and the magnetic pickup. A high signal-to-noise ratio (42.85 dB) was obtained. The FBG pickup has a frequency response range (0–3000 Hz) that is comparable to the reference pickup. The results indicated that the proposed pickup is effective to pick up the vibration. A simple structure design and low-cost interrogation system set-ups were proposed.     

High-index contrast grating based broadband out-coupler on SOI

An efficient broadband out-coupler on silicon-on-insulator (SOI) with high-index contrast grating (HCG) is proposed. The presence of a silicon-air (high-index contrast) grating on the top silicon layer in SOI allows a strong interaction between the guided mode and the grating. The broadband design of the out-coupler is presented by optimising the various grating parameters. The design analysis and simulation of such an out-coupler is performed with finite difference method. Coupling efficiency of 54% is achieved over an ultra-wide wavelength range from 1500 nm to 1650 nm.     

光纤传感器低温啁啾现象的分析

介绍了光纤光栅传感原理,依据传感机理制作了两种结构材料的光纤光栅传感器,对它们进行了试验,将试验后的传感数据进行了拟合分析和比对,并对它们在低温环境下产生的啁啾现象进行了分析,验证了采用预拉工艺对解决啁啾现象的可行性。     

基于CDMA的布拉格光纤光栅传感系统的仿真分析

讨论了光纤光栅传感系统中常用的复用技术及其限制,阐述了利用CDMA技术实现光纤布拉格光栅阵列波长解调的复用方式,对系统的原理和性能进行了理论分析。在此基础上通过MATLAB做了基于CDMA的光纤光栅传感仿真分析,仿真结果表明该方法能区分反射波长重叠的光栅,从而提高FBG网络复用的频带利用率。     

一种基于布拉格反射波导的表面等离子体激光光源（英文）

设计了一种基于布拉格反射波导的新型表面等离子体激光光源。这种光源结构简单,便于集成,可以在室温电泵浦的条件下工作,同时可以输出约毫瓦量级的表面等离子激光,相比于文献报道中纳米尺度的纳瓦级表面等离子体激光光源要高很多。该表面等离子体激光光源发射波长为808 nm,布拉格反射波导所提供的倾斜激光光线在我们设计的准Otto模型中可以直接耦合成为表面等离子体。     

Optical characteristics of subwavelength metallic grating coupled porous film surface plasmon resonance sensor with high sensitivity

A high performance sub-wavelength metallic grating coupled surface plasmon resonance (SWMGCSPR) sensor with metal and porous composite layer is proposed. Rigorous coupled-wave analysis (RCWA) is conducted to prove the design feasibility, characterize the sensor's performance and determine geometric parameters of the structure, which is also employed to compute the electromagnetic (EM) field distributions at the resonant wavelengths. Parameters of sensing platform are optimized to achieve the best performance of the SPR sensor. Obtained results reveal that the proposed structure can excite SPR with negative diffraction order of SWMG. Both wavelength and angular sensitivities are greatly enhanced because surface plasmon wave (SPW) exhibits a large penetration depth which will enlarge the distance of interactions between SP and analytes. The detection sensitivities and quality parameters are estimated to be 700 nm/RIU and 509°/RIU with full width at half maximum (FWHM) less than 2.5 nm using the same optimized structure.     

The research on temperature measurement based on polarization dependent loss

This paper analyzes the properties of reflected polarization dependent loss of apodized fiber Bragg gratings with temperature effective. We simulates reflected spectrum and polarization dependent loss of the apodized fiber Bragg gratings. The reflected spectrum and polarization dependent loss are measured under different temperatures. The analysis results show that reflected polarization dependent loss presents two peaks which shift an equal proportion to long wavelength with temperature increasing and have very good stability so we propose an idea that use polarization dependent loss as temperature sensor measurement parameters. The results show that the accuracy of measurement can be increased almost by one order of magnitude.     

6H-SiC衬底上AlGaN基垂直结构紫外LED的制备

利用金属有机物化学气相沉积方法,在n型6H-SiC衬底上制备了15对Si掺杂Al_(0.19)Ga_(0.81)N/Al_(0.37)Ga_(0.63)N DBR,并采用低温AlN缓冲层有效抑制了DBR结构中裂纹的产生,得到了表面均方根粗糙度仅为0.4 nm且导电性能良好的n型DBR,其在369 nm处峰值反射率为68%,阻带宽度为10 nm。在获得导电DBR的基础上,进一步在n型6H-SiC衬底上构建了有、无DBR的垂直结构紫外LED。对比两者电致发光光谱,发现DBR结构的引入有效增强了LED紫外发光强度。     

单端面长周期光栅透射模式测量技术

为了实现长周期光栅透射谱测量模式的远距离监测,设计了单端面镀反射膜的测量装置系统,对单端面镀银膜长周期光栅的传感原理做了分析,并从实验的角度分别对单端面镀银膜模式系统和直接透射模式系统的长周期光栅在不同折射率的环境介质中的响应进行了研究,比较了它们的异同。首先,采用2×2单模光纤耦合器分别连接光谱分析仪、光源、长周期光栅。然后,在包含长周期光栅的光纤的另一个端面制备反射银膜。最后,通过测量一系列不同折射率的环境介质,比较了直接透射模式与单端面镀银膜模式下的长周期光栅的响应光谱。实验结果表明:采用波长解调表达时,对于同一种环境介质,两种模式下长周期光栅的响应光谱的谐振波长基本相同;采用功率/峰值解调表达时,随着甘油浓度从水变为80%的甘油溶液,直接透射模式下的光损耗从-6.05 d B变为-9.22 d B,单端面镀银膜模式下的光损耗从-8.03 d B变为-11.33d B。与直接透射模式相比,单端面镀银膜的长周期光栅光谱中的相对光损耗明显增加,谐振峰更尖锐,更有利于谐振波长和谐振峰光损耗值的识别。本研究设计的单端面镀银膜的长周期光栅测量系统不仅保留了长周期光栅透射谱的感应模式,而且使长周期光栅在对环境介质的测量中操作更加灵活方便,尤其是在远距离、恶劣环境或深层液体的折射率测量中具有独特的优势。