AFS–3100原子荧光光度计联机异常故障排除

介绍了北京海光仪器公司生产的AFS–3100原子荧光光度计在使用过程中仪器与电脑通讯失败的故障原因及排除方法。     

Thermal oxidative degradation of additive-free polypropylene pellets investigated by multichannel Fourier-transform chemiluminescence spectroscopy

Thermal oxidative degradation of additive-free polypropylene pellets heated isothermally in dry air at 150 and 180 °C (below and above the melting point of 163 °C) was investigated by multichannel Fourier-transform chemiluminescence spectroscopy. The initial peak wavelength of chemiluminescence emission at 490 nm remained constant during the early stages of thermal degradation, but new emissions developed with time in the red spectral region over an extended oxidation period. The time-dependent luminescence spectra were deconvoluted into three emission bands by least-squares fitting using Gaussian curves. We concluded that at least three groups of luminescent species (luminophores), having different conjugation lengths, were generated by thermal oxidation over extended periods and show luminescence around 490, 660, and 740 nm.     

宽离子能量检测范围垂直引入反射式飞行时间质谱仪的研制

本实验室研制了国内首台宽离子能量检测范围飞行时间质谱仪。仪器采用紧凑式电子轰击源设计,配合离子透镜系统有效的调制离子流,飞行时间质量分析器采用了离子垂直引入式,双场加速和双场反射以及大尺寸MCP检测装置设计。仪器单离子信号半峰宽约2 ns,仪器分辨率优于1600FWHM,检测实际样品质量范围为1~127 amu(仪器理论质量检测上限优于800 amu),可检测离子能量范围优于2个数量级(3~140 eV)。若该TOF质量分析器与短瞬高压脉冲放电离子源耦合联用,可广泛应用于高能离子束的快速检测,如真空阴极放电对制备薄膜、离子注入材料的表征,导电材料的离子电荷态分布以及离子扩散速度的测定等。     

Determination of Cr(VI) by portable tungsten coil electrothermal atomic absorption spectrometer after surfactant-assisted dispersive liquid-liquid microextraction

As a new developed instrument, a portable tungsten coil electrothermal atomic absorption spectrometer (W-coil ET-AAS) was first coupled with surfactant assisted dispersive liquid–liquid microextraction (SA-DLLME) to improve its analytical performance and expand its applications in this work. SA-DLLME was very simple, rapid and the extraction efficiency was considerably improved by the effect of surfactant, which was suitable to be coupled with the portable instrument in field analysis. After SA-DLLME, concentrated chromium in organic phase was directly determined on W-coil atomiser. The influence factors relevant to SA-DLLME and instrumental conditions were studied systematically. Under the optimal conditions, the limit of detection (LOD) for Cr(VI) was 0.016 µg L^?1, with sensitivity enhancement factor (EF) of 107. The relative standard deviation (RSD) for seven replicate measurements of 0.5 µg L^?1 of Cr(VI) was 4.6%. The recoveries for the spiked samples were in the acceptable range of 96.8–104%. The rapid, simple and high effective method greatly improved the sensitivity of this portable spectrometer for the determination of Cr(VI) and was applied to the analysis of ultra-trace Cr(VI) in real and certified water samples with satisfactory results.     

Nondestructive damage assessment in fiber reinforced composites with the pulsed ultrasonic polar scan

This study investigates the use of both amplitude and time-of-flight based pulsed ultrasonic polar scan (P-UPS) as a sophisticated non-destructive damage sensor for fiber reinforced composites. Focus is put on stiffness related damage phenomena, which are in general difficult to monitor nondestructively, and their associated signature in the P-UPS image. Various composite samples, with different damage states, have been inspected at multiple material spots with the P-UPS technique. The results demonstrate the capability of the P-UPS method to obtain a unique signature of the local material damage characteristics. Several indicators in the acquired P-UPS images have been identified from which the type and level of material degradation can be obtained. The P-UPS extracted characteristics are fully supported by simulations, conventional tests as well as visual inspection.     

Compression testing of continuous fiber reinforced polymer composites with out-of-plane fiber waviness and circular notches

We investigated the face-stabilized Open-Hole Compression (OHC) test method for evaluating the effects of fiber waviness on the compression strength of continuous carbon fiber reinforced polymer composites. Temporal evaluations of the load-deformation response, acoustic emissions and optical microscopy are used to understand the failure modes and damage progression in the OHC specimen. The failure modes observed are structurally correlated to matrix failure and kink zone formation leading to fiber fracture. The results show how the resin pocket plays a more critical role than the layup in influencing the initiation of damage in the composite specimens.     

Development of an automated dual‐mode supercritical fluid chromatography and reversed‐phase liquid chromatography mass‐directed purification system for small‐molecule drug discovery

We report the development of a dual‐mode mass‐directed supercritical fluid chromatography and reversed‐phase liquid chromatography purification system. The addition of a third pump allows for flexible mobile phase control between the two techniques, and enables operation of either chromatography mode within minutes by activation of a set of switching valves on a single system. Software control, fluidic pathways, interface to the mass spectrometer, and fraction collection have been modified for compatibility between both separation methods. The conditioning solvent and tuning parameters for the mass spectrometer were adjusted to achieve an ideal signal trace in either mode with good linearity (r² > 0.970) over a range of concentrations and minimal noise for accurate peak detection and isolation. The registration success rate is 90% and overall sample recovery for either technique is 80?90%. Combining two orthogonal separation and purification modes in one single system has improved the purification throughput of complex mixtures and has been a valuable, cost‐saving tool in our laboratory.     

Fiber optical parametric amplifiers in optical communication systems

The prospects for using fiber optical parametric amplifiers (OPAs) in optical communication systems are reviewed. Phase‐insensitive amplifiers (PIAs) and phase‐sensitive amplifiers (PSAs) are considered. Low‐penalty amplification at/or near 1 Tb/s has been achieved, for both wavelength‐ and time‐division multiplexed formats. High‐quality mid‐span spectral inversion has been demonstrated at 0.64 Tb/s, avoiding electronic dispersion compensation. All‐optical amplitude regeneration of amplitude‐modulated signals has been performed, while PSAs have been used to demonstrate phase regeneration of phase‐modulated signals. A PSA with 1.1‐dB noise figure has been demonstrated, and preliminary wavelength‐division multiplexing experiments have been performed with PSAs. 512 Gb/s have been transmitted over 6,000 km by periodic phase conjugation. Simulations indicate that PIAs could reach data rate x reach products in excess of 14,000 Tb/s × km in realistic wavelength‐division multiplexed long‐haul networks. Technical challenges remaining to be addressed in order for fiber OPAs to become useful for long‐haul communication networks are discussed.

     

Enhanced Static Modulated Fourier Transform Spectrometer for Fast Approximation in Field Application

We discuss the data sampling frequency, the spectral resolution, and the limit for non-aliasing in the static modulated Fourier transform spectrometer based on a modified Sagnac interferometer. The measurement was performed in a very short 4 ms, which is applicable for real time field operation. The improved spectrometer characteristics were used to investigate the spectral properties of an InGaAs light emitting diode. In addition, The measured spectral peak was shifted from 6420 cm⁻¹ to 6365 cm⁻¹, as the temperature increased from 25 °C to 40 °C, when the operating current is fixed to be 0.55 A. As the applied current increased from 0.30 A to 0.55 A at room temperature, the spectral width was broadened from 316 cm⁻¹ to 384 cm⁻¹. Compared to the conventional Fourier transform spectrometer, the measured spectral width by the static modulated Fourier transform spectrometer showed a deviation less than 10%, and the spectral peak shift according to the temperature rise showed a difference within 2%.