相位匹配下锥形光纤激发出的回廊模谐振

分别计算不同直径下锥形光纤基模和玻璃微球谐振腔内最低阶径向回廊模的传播常量,利用相位匹配条件,作出了锥形光纤与石英玻璃微球腔的直径对应关系曲线.在此基础上,选择锥腰直径2.8 μm左右的低损耗锥形光纤与直径143.1 μm球形度很好的玻璃微球腔进行近场耦合以激发球内的最低阶径向回廊模谐振,在锥形光纤的两端进行通光测试,在输出端获得了等间距分布的窄线宽滤波谱线,其吸收峰位置与利用Mie理论计算的球内最低阶径向回廊模谐振峰位置相一致.     

适用于光突发交换网的可编程光缓存器

提出了两种适用于光突发交换网的可编程光缓存器结构：交叉型和多端口开关型.两种结构都能满足突发包缓存的超长性和可变性的要求,且结构简单紧凑,成本低,可扩展.交叉型缓存器通过指定信号在每个子缓存模块的光纤环中的循环次数即能实现可变时间的延迟.多端口开关型缓存器通过指定信号在两个多端口开关相应端口与所接光纤延迟线组成的光纤环中的循环次数实现可变时间的延迟.仿真结果表明,两种可编程光缓存器都能对光突发包实现ns级指定时间延迟,可用于解决光突发交换网突发包的冲突问题.     

碲基掺铒光纤放大器对于渐变输入信号的瞬态响应

为了抑制输出信号功率的瞬态波动,提出了调理脉冲信号边沿变化方式的思想.通过有限差分法数值模拟四能级模型下的粒子数速率-光功率传输方程组,理论研究了宽带碲基掺铒光纤放大器(Erbium-doped Tellurite-based Fiber Amplifier,EDTFA)对于低频脉冲输入信号的瞬态响应.研究表明,相比具有阶跃上升沿的方波脉冲,选择一个合适的渐变上升沿脉冲信号可以有效地抑制EDTFA输出端信号功率的瞬时上冲幅度.在多信道系统中,选择渐变的信道功率上传和下载方式,可以延缓其余信道输出功率的瞬态响应速度,从而为后续增益箍制技术的实施提供了便利.     

Stable multiwavelength and passively mode-locked Yb-doped fiber laser based on nonlinear polarization rotation

Based on the nonlinear polarization rotation (NPR) technique and a fiber Mach–Zehnder interferometer (MZI), a fiber laser which can work in two different modes has been demonstrated. In one mode, it works as a continuous wave (CW) multiwavelength laser, and stable dual-, triple- and tetra-wavelength lasing with the wavelength spacing of 1.1 nm are obtained. In the other mode, it works as a passively mode-locked fiber laser, and the generated pulses have a repetition rate of 10.6 MHz, an FWHM width of 800 ps and the largest energy of 1 nJ. The multi-functional property makes this fiber laser a very convenient, cost effective and multi-purpose laser source.     

+1/-1相位掩模板和532nm激光下低损耗As_2S_3硫系光纤布喇格光栅的制备

采用改进型Sagnac干涉光栅写入系统,利用532nm准带隙光曝光源和带+1/-1衍射级的相位掩模板,在两种不同直径的低损耗As_2S_3硫系玻璃光纤上刻写布喇格光栅,并研究曝光期间光栅的动态特性.实验表明,As_2S_3光纤布喇格光栅透射峰值随光纤直径的减小而增强;在曝光过程中,布喇格波长先是较快地向短波长方向移动,随着曝光时间的延长,布喇格波长缓慢地向长波长方向回复.曝光时间为800~1 000s时,在包层直径为140μm的As_2S_3光纤上获得质量良好的布喇格光栅光谱,其透射峰值可达-2.6dB,带宽为0.37nm.对As_2S_3硫系光纤纤芯的光敏性分析结果表明,折射率调制幅度和平均折射率变化随曝光时间分别可达到10-4和10-3数量级.     

Improvement of the dynamic range of a fiber specklegram sensor based on volume speckle recording in photorefractive materials

In this work, the improvement of the dynamic range of a micro displacement sensor based on fiber specklegrams holographically stored in a photorefractive BSO (Bi₁₂SiO₂₀) crystal is reported. In our experimental setup, a plastic optical fiber (POF) was used to generate a subjective speckle pattern that was recorded in the crystal using a two-wave mixing arrangement. The speckle size was controlled by modifying the diameter of a pupil aperture adjacent to a lens producing the image of the speckle. Fringe patterns were obtained at the output of the system by producing micro displacements of the fiber output end. An increase in the visibility of the fringe patterns was appreciated when the pupil aperture diameter decreased even without controlling the average modulation of the intensity of the light pattern, i.e. when the speckle length increased and the average light modulation simultaneously decreased. This behavior allowed recovering the autocorrelation functions of fringe patterns associated with displacements that initially led to decorrelation, and therefore, significantly to improve the dynamic range of the metrological system. To the best of our knowledge this is the first report about the influence of speckle size on the dynamic range of fiber specklegrams sensors recorded on photorefractive materials.     

光纤法珀应变传感器串并联混合复用的离散腔长变换解调研究

光纤法珀传感器复用的输出信号复杂,解调相当困难.为实现其串并联混合结构复用,根据光纤法珀应变传感器的双光干涉原理,阐述了传感器串并联混合复用的输出信号特征,分析了信号中各项成分对离散腔长变换方法解调结果的影响,并进行了计算机仿真.最后搭建实验平台,进行了四个传感器串并联混合复用的实验研究,证明该方案可行,解调准确度1 μm.     

自调Q光纤激光器的理论分析和数值模拟

基于自调Q光纤激光器的基本理论,结合速率方程理论与自调Q特点,借助简化的环形腔掺Er3+光纤激光器模型,分析了泵浦功率与自调Q脉冲周期、峰值功率的关系.随着泵浦功率的增加,光纤激光器自调Q脉冲的周期减小,峰值功率变大;当信号光强足够大时,激光器的自调Q现象消失,变为准连续激光输出.通过MATLAB编程对光纤激光器输出特性进行了数值模拟,模拟结果与实验结果基本相符.     

大范围光纤Bragg光栅压力传感器增敏实验研究

鉴于钛合金材料具有低弹性模量、受温度影响小等特性,设计制作了一种以钛合金管作为光纤Bragg光栅应变增敏衬底元件的高压压力传感器件.通过与电阻应变计实时监控的对比,从实验上研究了光纤Bragg光栅的中心波长偏移对调谐压强的响应.结果表明:这种增敏设计,具有良好的线性响应和可重复性,且与理论推导结果吻合较好.增敏后对压力的响应灵敏度可达0.034 nm/MPa,测压量程可达0~40 MPa,甚至更宽.     

光纤光栅温度与轴向应变响应机制分析

本文对温度和轴向应变对长周期光纤光栅和Bragg光纤光栅耦合波长的影响机制作出分析,通过有代表性的举例计算数值给出了各因素对耦合波长的影响,指出轴向应变对耦合波长的影响除了来自光弹性效应带来的光纤折射率的改变外,光纤半径的变化,特别是光栅周期的改变也起重要作用.对比分析找到了长周期光纤光栅与Bragg光纤光栅温度,应变响应系数数量级异同的原因.