Dispersion Compensation in Externally Modulated Transmission System Using Chirped Fiber Grating

We present an externally modulated NTSC AM-VSB erbium-doped fiber amplifier (EDFA)-repeated system in the 1550 nm region which uses a chirped fiber grating (CFG) as a dispersion compensation device. In contrast to the conventional externally modulated fiber optical CATV systems, either with or without dispersion compensation fiber (DCF), good performances of carrier-to-noise ratio (CNR) ≥50 dB, composite second order (CSO) ≥74 dB, and composite triple beat (CTB) ≥65 dB were achieved for the full channel band after a 100-km single-mode fiber (SMF) transmission.     

X光底片在位相对标定

本文描述了X光底片在位相对标定技术。其原理是使X射线谱经阶梯形吸收滤片透射后,对X光底片曝光,测量底片的曝光量。文中给出了标定方法和数据处理方法,而且也给出了在X光激光实验中得到的Kodak AA5底片的特性曲线。     

基于TMS320C5410EVM板的IIR数字滤波器的设计

本文研究DSP中的IIR数字滤波器的原理和用MATLAB在TMS320C5410EVM中设计IIR数字滤波器的过程和设计方法以及程序的调试方法。     

Instability of Fabry-Perot interferometer with a multilayered paramagnetic filling

The results of the analysis of the stability of stationary solutions of wave equations discribing a behavior of the nonlinear Fabry-Perot interferometer with a saturated paramagnetic filling are presented in this paper. The cases when paramagnetic medium is characterized by a homogeneously and nonhomogeneously broadened line of the magnetic resonance have been considered. Areas of unstable behavior of these characteristics of the resonance structure have been found.     

InAs/GaSb/AlSb resonant tunneling spin device concepts

We discuss device concepts for creating spin-polarized current sources without external magnetic fields, using non-magnetic 6.1 Å semiconductor resonant tunneling structures. Spin filters, spin pumps, and spin transistors that exploit structural and bulk inversion asymmetries will be examined.     

光纤法布里-珀罗传感器腔长的傅里叶变换解调原理研究

在宽带光源条件下对光纤法布里-珀罗传感器腔长的傅里叶变换解调原理进行了详细的理论推导,在此基础上给出了具体的实现算法和仿真对比实验.仿真结果表明:采用傅里叶变换可以有效地对光纤法布里-珀罗传感器进行腔长解调.     

Bending loss measurement using a fiber cavity ringdown scheme

A novel sensitive technique for the determination of losses in fiber cavities is presented. The method is based on the cavity ringdown scheme implemented in silica-based single-mode fibers. Bending losses of fiber cavities of different lengths have been measured showing all an oscillating behavior with respect to the curvature radius of the fiber as predicted by a theoretical model. The best minimum detectable absorbance per cavity pass achieved by this new method is 1.72×10⁻³ dB within a 10 m-long cavity. This limit suffices well for an accurate determination of optical bending losses even in bend-insensitive fibers. Furthermore, the comparison of the measured bending losses with a theoretical model allows the extraction of different fiber parameters. Good agreement has been found between the experimentally derived parameters and literature data.     

Differential FBG sensor for temperature-compensated high-pressure (or displacement) measurement

A differential fiber Bragg grating (FBG) sensor with a free active element bulk-modulus for high-pressure (or displacement) measurement is presented. Based on the differential measurement method and an isosceles triangle cantilever structure, problems of cross-sensitivity and chirped signal in FBG sensor are improved both theoretically and experimentally. Preliminary experiments indicate that temperature-compensated measurement results agree well with the theoretical analysis. Displacement measurement sensitivity is 1.75 pm/μm, and the estimated pressure measurement resolution can reach 0.27 MPa in case the wavelength shift measurement resolution is 0.01 nm.     

一种新颖的超结构光纤Bragg光栅梳状滤波器的设计

报道一种新颖的用于多波长光纤激光器的超结构光纤Bragg光栅（SFBG）梳状滤波器，其突出特点是仅由单个光栅构成、折射率调制和局部啁啾富于变化、反射峰均匀性好、窄带宽和标准的信道间隔.采用基于LP算法的IS光纤光栅设计技术，将整体加窗切趾法改进为各信道独立加窗切趾，成功地设计出所需的SFBG，同时对SFBG的制作技术也进行了探讨.用传输矩阵法分析反射谱、时延曲线和群时延抖动.结果表明，所设计的SFBG满足各项设计指标要求，在DWDM系统中，这种新颖的SFBG可望成为用于多波长光纤激光器的最理想的高性 能梳 关键词： 超结构光纤Bragg光栅 光栅设计 梳状滤波器