Low-energy ion-assisted control of interfacial structures in metallic multilayers

A molecular dynamics method has been used to simulate the argon ion-assisted deposition of Cu/Co/Cu multilayers and to explore ion beam assistance strategies that can be used during or after the growth of each layer to control interfacial structures. A low-argon ion energy of 5–10 eV was found to minimize a combination of interfacial roughness and interlayer mixing (alloying) during the ion-assisted deposition of multilayers. However, complete flattening with simultaneous ion assistance could not be achieved without some mixing between the layers when a constant ion energy approach was used. It was found that multilayers with lower interfacial roughness and intermixing could be grown either by modulating the ion energy during the growth of each metal layer or by utilizing ion assistance only after the completion of each layers deposition. In these latter approaches, relatively high-energy ions could be used since the interface is buried and less susceptible to intermixing. The interlayer mixing dependence upon the thickness of the over layer has been determined as a function of ion energy.     

Effect of reaction conditions on the molecular weight and polydispersity of linear poly(arylene ether phosphine oxide)s prepared from an AB monomer

A thorough study of the polymerization behavior of 4‐fluoro‐4′‐hydroxytriphenyl‐phosphine oxide, 2 , under nucleophilic aromatic substitution reactions has been carried out. The synthesis of 2 was achieved in excellent yields by the reaction of bis(4‐fluorophenyl)phenylphosphine oxide, 1 , with one equivalent of potassium hydroxide in DMSO/water. The structure and purity of 2 were confirmed via ¹H, ¹³C, and ³¹P NMR spectroscopy along with elemental analysis. Polymerization reactions of 2 in NMP or DMSO at 180 °C provided the corresponding linear poly(arylene ether phosphine oxide)s, PAEPOs, with number average molecular weights, M_n, ranging from 11,700 to 36,500 Da. All of the polymer samples were completely soluble in chloroform, tetrahydrofuran, DMSO, NMP, and DMAc. The polymerization reactions were accompanied by a competing intramolecular process that resulted in the formation of cyclic oligomeric species that were removed via a final precipitation from methanol. Analysis using ³¹P NMR spectroscopy and size exclusion chromatography (SEC) confirmed that the majority of the lower molecular weight cyclic species were removed via this process. The polymer samples formed tough films when chloroform solutions were slowly evaporated on a glass slide. The PAEPO samples prepared in this study exhibited excellent thermal stability with T_d (5%) values between 503 and 542 in air while the glass transition temperatures ranged from 223 to 237 °C. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2099–2106, 2006     

Effect of stoichiometry on liquid crystalline supramolecular polymers formed with complementary nucleobase pair interactions

We report herein studies on the liquid crystalline behavior of a series of supramolecular materials that contain different ratios of two complementary symmetrically-substituted alkoxy-bis(phenylethynyl)benzene AA- and BB-type monomers. One monomer has thymine units placed at either end of the rigid mesogenic core, while the other has N⁶-(4-methoxybenzoyl)-adenine units placed on the ends. Differential scanning calorimetric and polarized optical microscopy studies have been carried out on these systems. These studies show that the material's behavior is strongly dependent on its thermal history. As a result, the materials can exhibit, on heating, either a liquid crystalline phase, a crystalline phase, or the coexistence of crystalline and liquid crystalline regions. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5049–5059, 2006     

Synthesis of polyacrylonitrile via reverse atom transfer radical polymerization catalyzed by FeCl3/isophthalic acid

FeCl₃ coordinated by isophthalic acid was first used as a catalyst in the azobisisobutyronitrile‐initiated reverse atom transfer radical polymerization of acrylonitrile. N,N‐Dimethylformamide was used as a solvent to improve the solubility of the ligand. An FeCl₃‐to‐isophthalic acid ratio of 0.5 not only gave the best control of the molecular weight and its distribution but also provided rather a rapid reaction rate. The effects of different solvents on the polymerization of acrylonitrile were also investigated. The rate of the polymerization in N,N‐dimethylformamide was faster than that in propylene carbonate and toluene. The molecular weight of polyacrylonitrile agreed reasonably well with the theoretical molecular weight in N,N‐dimethylformamide. The rate of polymerization increased with increasing polymerization temperature, and the apparent activation energy was calculated to be 59.9 kJ mol^?1. Reverse atom transfer radical polymerization was first used to successfully synthesize acrylonitrile polymers with a molecular weight higher than 80,000 and a narrow polydispersity as low as 1.22. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 219–225, 2006     

Chiral soluble polymers and microspheres for enantioselective crystallization

A series of chiral polymers based on poly(N‐acryl) amino acids was synthesized using a convergent synthetic approach. These chiral polymers have been used as chiral additives to induce enantioselective crystallization of racemic or conglomerate amino acids in solutions. These polymeric additives showed strong capabilities to enhance highly enantioselective resolution during the crystallization of amino acids. In addition, these polymers caused unusual modifications of amino acid crystal morphologies. Furthermore, spherical microparticles of those same chiral polymers were also shown active in similar chiral discriminations during amino acid crystallizations occurring on microparticle surfaces. Our study demonstrates the high potential of chiral polymers and microparticles to resolve amino acids throughout crystallization processes. High enantiomeric excesses in one targeted enantiomer of amino acids can also be maximized via time‐dependent kinetic control of crystallizations. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3009–3017, 2006     

Charge density effects in salt‐free polyelectrolyte solution rheology

Solution rheology of 2‐vinyl pyridine and N‐methyl‐2‐vinyl pyridinium chloride random copolymers in ethylene glycol was studied over wide ranges of concentration and effective charge. The fraction of quaternized monomers α and the fraction of monomers bearing an effective charge f of these copolymers were measured using counterion titration and dielectric spectroscopy, respectively. Ethylene glycol is a good solvent for neutral poly(2‐vinyl pyridine), with very few ionic impurities. The viscosity η and relaxation time τ of dilute and semidilute unentangled solutions exhibit the scaling with concentration and effective charge expected by the Dobrynin model. Reduced viscosity data are independent of concentration in dilute solution, giving an intrinsic viscosity that depends on effective charge, and the experimental data obey the Fuoss law in the semidilute unentangled regime. Scaling concentration with the overlap concentration (c/c*) reduces these data to common curves, and c* ～ f ^?12/7 as predicted by the Dobrynin model, where f is the fraction of monomers bearing an effective charge. While the overlap concentration depends strongly on effective charge until counterion condensation occurs, the entanglement concentration c_e is surprisingly insensitive to effective charge, indicating that entanglement effects are not understood using the Dobrynin model. The terminal modulus G = η/τ depends only on the number density of chains G = ckT/N for c* < c < c_e, and G ～ c^3/2 for c > c_e independent of the effective charge. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2001–2013, 2006     

Mathematical modeling of crystallization analysis fractionation (Crystaf) of polyethylene

Four polyethylene samples (PE) with different molecular weight distributions (MWD) were analyzed by crystallization analysis fractionation (Crystaf) at several cooling rates to investigate the effect of MWD and cooling rate on their Crystaf profiles. Using these results, we developed a mathematical model for Crystaf that considers crystallization kinetic effects, which are ignored in all previous Crystaf models. The Crystaf model we proposed can fit the experimental Crystaf profiles of the 4 polyethylene resins very well. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2749–2759, 2006     

Effect of the environment on the stability of surfactant–polypeptide self‐assembled complexes: Molecular dynamics simulations of stoichiometric complexes formed by N‐dodecyltrimethylammonium and poly(α,L‐glutamate) in chloroform,methanol, and water

A series of molecular dynamics simulations have been performed to study the supramolecular structure of self‐assembled complexes formed by N‐dodecyltrimethylammonium cations and the synthetic polypeptide poly(α,L ‐glutamate). The influence of the type of solvent has been investigated, considering explicit environments of chloroform, water, and methanol on a stoichiometric complex containing 15 residues. In chloroform, the complex stabilizes in a regular structure: the polypeptide adopts an α‐helix conformation that is regularly surrounded by surfactant molecules to form electrostatic interactions through a multiple interaction pattern. However, this structure destabilizes in methanol and water: (a) the α‐helix unfolds in the two solvents and (b) the electrostatic links between the surfactant molecules and the polyanion are disrupted in aqueous solution, although these interactions are still preserved in methanol. The role of the solvent environment in stabilizing or destabilizing the polypeptide secondary structure, the organization of the surfactant molecules, and predominantly the surfactant–polypeptide supramolecular organization is discussed in detail. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1122–1133, 2006     

USING A SYSTEM DYNAMICS APPROACH TO MODEL SUSTAINABILITY INDICATORS FOR IRRIGATION SYSTEMS IN AUSTRALIA

ABSTRACT. An indicator defined as a function of the total water diversion through the Coleambally canal and the potential irrigation demand is selected to represent the sustainability of the irrigation water system in the Coleambally irrigation area, Australia. A simulation procedure using a system dynamics approach was developed to evaluate the indicator. The procedure includes water diversion assessment, potential crop water demand and total gross margin. Three cases of water supply options (surface water, ground water pumping and water trading), two cases of changes in the total agricultural area and three cropping pattern scenarios were simulated to better understand their impact on sustainability. The simulated results indicate that increasing the agricultural area reduces the sustainability of the irrigation system because the demand of water increased despite increase in the gross margin. The scenarios show that imposed water trading and ground water pumping would considerably increase the supply system having a positive impact on the sustainability. The paper concludes that a multi‐objective sustainability indicator taking account of economic and environmental issues could be more useful.     

Photochemical properties and structures ofN-amino andN-azomethine derivatives of 2,4,6-triphenylpyridinium perchlorates

The molecular structures of the initial compounds and the products of photocyclization involving amino and azomethine groups in perchlorates ofN-amino (1) andN-azomethine (2) derivatives of 2,4,6-triphenylpyridinium cations were studied. Cations1 and2 have an essentially non-coplanar arrangement of the -Ph rings, and the product of photocyclization of2, cation3, is characterized by a flattened structure. It was found that the orientation of the lone electron pair of the N atom with respect to one of the planes of the -Ph rings in molecule1 is more favorable for monocyclization involving the amino group. The structure of molecule2 allows two routes of the photoreaction,viz., O N proton transfer and monocyclization with an -Ph ring. However, the structural features of molecule2 are more favorable for photocyclization.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 296–301, February, 1995.