光纤拉曼放大器中增益的偏振相关特性研究

提出了一种改进的、可用于计算偏振相关拉曼增益的光纤拉曼放大器的非线性耦合波方程。建立了单模双折射光纤拉曼增益的数学模型,分析了线偏振抽运光以与光纤快轴成45°激励的单模双折射光纤拉曼放大器模型与实际具有随机双折射的光纤拉曼放大器的拉曼增益偏振相关特性的等价性。基于上述模型,提出了一个可定量表征单模光纤偏振模色散统计特性的拉曼增益偏振相关因子,用以替代常规的光纤拉曼放大器非线性耦合波方程中的偏振相关因子。计算结果与已报道文献的实验数据非常吻合。同时对抽运增益在同向和反向抽运方式下截然不同的增益偏振相关特性给出了合理的解释。     

Characteristic properties of the conical Mueller matrix

We present results of mathematical relations existing between the Mueller matrix obtained for an in-plane of incidence scattering geometry (plane Mueller matrix, PMM) and the Mueller matrix obtained for an out-the-plane of incidence scattering geometry (conical Mueller matrix, CMM), for light scattered from a rough surface. We obtain a similarity relation between the CMM and the PMM for one- (1-D) and for two-dimensional (2-D) surfaces. This similarity relation implies that the PMM and the CMM have the same determinant, trace and eigenvalues for 1-D and 2-D surfaces, respectively. We can say that measurements made in the conical geometry are “Similarity Equivalent” to those in the in-plane geometry for both kind of surfaces, respectively.     

Coupled mode analysis of in-plane channel drop filters with resonant mirrors

A channel drop filter system that consists of two waveguides and three cavities is studied. One cavity couples with both waveguides, while the other two work as resonant mirrors to reflect the selected channel back into the system. The operation of this configuration is analyzed, using coupled mode theory. The conditions to achieve 100% in-plane channel transfer are derived. A method to suppress the side lobes of reflection and backward drop is also proposed. The direct coupling between the cavities is not required. The analysis is verified by two-dimensional finite difference time domain simulations in 2D hexagonal photonic crystals.     

自由曲面光学虚拟制造与检测系统的探讨

自由曲面光学产品设计、制造与检测的工艺流程，通常采取试凑法逐次逼近。由于加工 检测 再加工，循环往复，既费时，成本又高，产生了瓶颈问题。为了解决此弊端，本文运用虚拟制造技术，提出光学虚拟制造的基本构想，即虚拟制造系统结构模型，给出光学系统虚拟原型的构成和光学系统成像质量虚拟检测系统的构成，讨论光学成像质量的仿真检测以及敏度分析方法。研究结果表明：运用虚拟制造与检测技术，可缩短研发周期，降低成本，优化工艺并提高产品质量。     

Exciton-polaritons in lattices: A non-linear photonic simulator

Microcavity polaritons are mixed light–matter quasiparticles with extraordinary nonlinear properties, which can be easily accessed in photoluminescence experiments. Thanks to the possibility of designing the potential landscape of polaritons, this system provides a versatile photonic platform to emulate 1D and 2D Hamiltonians. Polaritons allow transposing to the photonic world some of the properties of electrons in solid-state systems, and to engineer Hamiltonians for photons with novel transport properties. Here we review some experimental implementations of polariton Hamiltonians using lattice geometries.     

Beam delivery system with a non-digitized diffractive beam splitter for laser-drilling of silicon

We report a beam-delivery system consisting of a non-digitized diffractive beam splitter and a Fourier transform lens. The system is applied to the deep-drilling of silicon using a nanosecond pulse laser in the manufacture of inkjet printer heads. In this process, a circularly polarized pulse beam is divided into an array of uniform beams, which are then delivered precisely to the process points. To meet these requirements, the splitter was designed to be polarization-independent with an efficiency>95%. The optical elements were assembled so as to allow the fine tuning of the effective overall focal length by adjusting the wavefront curvature of the beam. Using the system, a beam alignment accuracy of<5 μm was achieved for a 12-mm-wide beam array and the throughput was substantially improved (10,000 points on a silicon wafer drilled in ~1 min). This beam-delivery scheme works for a variety of laser applications that require parallel processing.     

High-speed and crack-free direct-writing of microchannels on glass by an IR femtosecond laser

Fabrication of high-resolution 3D structures with laser radiation on the surface of brittle materials has always been a challenging task. Even with femtosecond laser machining, micro-cracks and edge chipping occur. In order to evaluate processing modes optimal both in quality and productivity, we investigated high-speed (50 kHz) femtosecond laser processing of BK7 glass with the use of design of experiments and regression analysis. An automated inspection technique was developed to extract quality characteristics of test-objects. A regression model was obtained appropriate to fabricate microchannels with a predefined depth in the range of 1–30 µm with average accuracy of 5%. It was found that high quality machining modes are in the range of 0.91–2.27 µJ energy pulses, overlap of 53–62%, three and more number of passes. A material removal rate higher than 0.3 mm³/min was reached and microfluidic structures were formed based on data obtained.     

单双层共轭系统的共轭高度对等晕角的影响

 简要介绍了传统自适应光学系统的局限性和多层共轭自适应光学基本原理。模拟了单双层共轭校正系统的共轭高度,并结合平程与垂程(HV模型)两种传输状态对系统等晕角增益作了进一步的分析。对单层共轭系统,在20 km的传输距离内,在平程中整个区域都属于等晕角放大区,共轭高度的最佳位置在传输距离的中间（约10 km处）,等晕角取极大值,增益效果较好;但垂程中增益效果变差,且等晕角放大区也仅在3.6 km之内。对双层共轭系统来说,第1层共轭高度的变形镜主要对近距离畸变波前进行校正,并对整个传输距离的等晕角影响很大,是双层共轭系统的关键因素;第2层共轭高度对远距离等晕角影响较大。     

非视线紫外通信大气传输特性的蒙特卡罗模拟

基于蒙特卡罗方法建立了紫外光非视线传输多次散射模型,利用单次散射近似法和实验方法验证了模型的有效性,并利用该模型完成了非视线紫外光通信大气传输特性的模拟.模拟时光波长取紫外光通信的最佳工作波段(250 nm附近),分析了不同传输距离下能见度、风、雨、雾等参量对系统能量透射比的影响.结果指出,系统能量透射比随传输距离增大而剧烈减小,在天气较差传输条件下能量衰减得更快;风力大小的变化对通信系统影响不大.较近距离通信传输时(一两百米),通信系统受天气条件的影响较小.     

双螺旋叠栅条纹检测光束准直性的两种方法

介绍双螺旋叠栅条纹检测光束准直性的基本原理,进一步就双螺旋叠栅条纹的特征参量与被测光束发散角(即光束准直精度)的关系进行分析和推导。在分析双螺旋叠栅条纹进行时,首先采用频域低通滤波提取纯叠栅条纹,然后提取纯叠栅条纹的特征参量。提出两种特征参量的提取方法,一种依次进行傅里叶变换计算相位信息的傅里叶变换方法,另一种是受传统时间相移算法启发而提出的空间相移算法,讨论了在两种方法中极坐标的重采样问题和相应的计算公式,并进行了计算机模拟。结果表明,傅里叶变换方法和空间相移算法实质都是获取叠栅条纹全场趋势的平均值,使最终光束发散角的检测具有很高的精度,对自成像条纹周期的检测误差在±2.8‰以内。