四元缔合物体系薄层树脂相分离与光度法联用测定痕量钴

提出了在酸性条件下 (pH=5.0),利用阳离子交换树脂-丁二酮肟-碘-钴四元体系,通过薄层树脂相光度法测定钴的新方法。本法灵敏度高 (e454=1.7105L/molcm),比水相光度法提高14倍,精密度理想 (测定2.0礸/ml Co(II) 6次,RSD=1.3%),选择性好。实测药品VB12及天然水中钴,线性范围0.024~2.0礸/ml (定容50ml),检出限10.4ng/ml。     

Experimental and theoretical study of vibrational spectra and structure of dihalogermylene and dihalostannylene complexes with 1,4-dioxane and triphenylphosphine

Vibrational (Raman and IR) spectra of the 1:1 complexes of dihalogermylene and dihalostannylene with 1,4-dioxane and PPh₃ have been reported, the structures of the complexes Cl₂Ge·C₄H₈O₂ and Cl₂Ge·PPh₃ updated using high-resolution X-ray method. Quantum-chemistry calculations of the geometry and normal mode frequencies and eigenvectors were carried out for some of the complexes. The results show that in the structure of the polymeric solid complexes of X₂M with 1,4-dioxane, intermolecular coordination XM plays a prominent role, whereas the corresponding complexes with PPh₃ are monomeric. In the vibrational spectra of all the complexes, an inversion of symmetric and antisymmetric stretching νXM (X=Cl, Br; M=Ge, Sn) frequencies, found for ‘free’ X₂M^II particles, still persists, suggesting that the X₂M moieties preserve their specifity as carbene analogues also in the complexes.     

Preparation of apolar glass capillary columns by the barium carbonate procedure

As an extension of previous reports, the barium carbonate procedure has been optimized in detail for the preparation of apolar columns. The aim was to produce optimum overall column characteristics, and to maintain them unchanged under the prolonged influence of the highest possible temperature. The main parameters under optimization were glass variety, leaching of glass surface with aqueous HCl, and amount of barium carbonate deposited, while deactivation and coating were kept constant. The basic column characteristics were adsorption properties and thermostability of deactivation, acid/base behaviour and separation efficiency. They were determined by a new, quantitative testing procedure. Intense leaching was able to eliminate almost totally the differences between glass varieties and to create a well-defined glass surface. While untreated glass, leached glass, and barium carbonate treated glass showed specific weak points in the respective column quality, the combination of leaching and barium carbonate treatment yielded the highest and most stable quality. Some technical modifications of the preparation procedure are described, including deactivation in the gas phase, and use of pentane as a solvent for static coating.     

Bestimmung der Trichloressigs?ure durch Absorptions- und Fluorescenzmessung

Zusammenfassung Für die Rückstandsanalyse der als Herbicid verwendeten Trichloressigsäure (TCA) wurde eine Methode sowohl für die Absorption- sals auch für die Fluorescenzmessung entwickelt. TCA wird im stark alkalischen Milieu zu Chloroform abgebaut und mit Pyridin zu einer Schiffchen Base umgesetzt (Fujiwara-Reaktion). Diese rote instabile Verbindung wird mit Barbitursäure in einen beständigen Pentamethinfarbstoff überführt, dessen Absorptionsmaximum bei 594 nm liegt. Als Untersuchungsmaterial dienten Bodenproben. Bei einer Einwaage von 100 g Boden lassen sich noch 0,1 ppm TCA nachweisen. Durch Fluorescenzmessung (Anregungsmaximum 588 nm, Emissionsmaximum 611 nm) werden bei gleichen Versuchsbedingungen noch 0,01 ppm erfaßt.

---

Determination of trichloroacetic acid by absorption spectrometry and fluorometry

Summary A method for absorption and fluorescence measuring of the residues of trichloroacetic acid (TCA) used as herbicide was developed. TCA was decarboxylated with strong alkali and converted with pyridine to a Schiff's base (Fujiwara reaction). After the reaction of the Schiff's base with barbituric acid a stable pentamethin dyestuff was formed. The maximum absorbance occurs at 594 nm. Samples of soil were analysed. In a sample of at least 100 g 0.1 ppm of TCA are still detectable. By fluorometry (excitation maximum 588 nm, emission maximum 611 nm) the detection limit is at 0.01 ppm under the same conditions.

     

Application of a micro carbon rod atomizer as Br-spezific gas-chromatographic detector

Summary A micro carbon rod atomizer has been employed for specific and quantitative bromine determinations. This Br-specific gas-chromatographic detector works by help of InBr-bands and measurement at 372.7 nm. The performance of this flame band emission detector (FBD) is demonstrated by calibration curves and the detection limits of 2 examples (ethyl bromide, ethylene dibromide), the latter being 5 and 36 ng of bromine, respectively. The reproducibility has been found to be 4.3%. An example of this detector in comparison with a thermoconductivity detector (TCD) is presented.

---

Verwendung einer Mikro-Graphitküvette als Br-spezifischer Detektor für die Gas-Chromatographie

Zusammenfassung Eine Mikro-Graphit-Küvette wird für spezifische quantitative Brombestimmungen nach der Indium-Methode bei 372,7 nm benützt und in Verbindung mit einem Gas-Chromatographen als Br-spezifischer Detektor eingesetzt. Die Leistungsfähigkeit dieses Detektors wird an 2 Beispielen (Äthylbromid, Dibromäthan) mit Hilfe von Eichkurven, Bestimmung von Nachweisgrenzen u. ä. demonstriert. Die Nachweisgrenzen liegen bei 5 bzw. 36 ng Brom für die 2 genannten Substanzen. Die Reproduzierbarkeit der Messungen liegt bei 4,3%. Ein Beispiel für die Registrierung eines Gemisches verschiedener Substanzen, gemessen mit dem GC + Flammen-Banden-emissions-Detektor (FBD) und zum Vergleich mit einem Wärmeleitfähigkeitsdetektor (TCD), wird dargestellt.

This research work was supported by financial help of the Bundesminister für Forschung und Technologie in Bonn (GFR).     

Hydrogenation of ethyl esters of 4-phenyl-and (2-furyl)-substituted 2,4-dioxobutyric acids at palladium black

The hydrogenation of ethyl 4-R-2,4-dioxobutyrates (R = phenyl, 2-furyl) at 5% Pt/Al₂O₃ catalyst, modified with cinchonidine, and at palladium black was investigated. The former had low activity under the conditions we tested. The main products during the hydrogenation of these compounds at palladium black are ethyl 4-R-2-hydroxy-4-oxobutyrates. The yield of the phenyl derivative amounts to 68.5%, while the yield of the corresponding 2-furyl derivative amounts to 97%. In the last case ethyl 2-hydroxy-4-oxo-4-(2-tetrahydrofuryl)butyrate was detected as impurity. The optimum conditions for the formation of ethyl 2-hydroxy-4-phenylbutyrate (yield 88.2%) were determined. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 5, pp. 655–659, May, 2006.     

Polynuclear manganese grids and clusters—A magnetic perspective

High nuclearity paramagnetic, spin-coupled transition metal clusters and grids are fascinating chemists and physicists partly because of their structural beauty, and the challenge of creating them, but also because of their novel physical properties. Magnetic interactions between the spin centers are a primary focus. This review will examine a selection of Mn(II) polynuclear grids and clusters, with nuclearities in the range Mn₄ to Mn₉. Theoretical treatments of the magnetic properties are discussed, and approaches to solving the exchange problem for ‘large’ spin systems related to computational difficulties. A freely available software package (MAGMUN4.1) is presented as a means of dealing simply with spin-coupled clusters in general, and symmetry reduction methods are discussed briefly as a means of dealing with ‘large’ spin systems.     

Protection of immobilized sulfhydryl groups against autooxidation by alterations in their microenvironment

Immobilized sulfhydryl groups were prepared by partial thiolation of NH₂-glass beads. The microenvironment of the immobilized SH groups was varied by different chemical modifications of neighboring NH₂ groups. Introduction of a strong charge in the surroundings of immobilized sulfhydryls results in their dramatic stabilization against autooxidation. This effect is due to the salting of O₂ from the surface microlayer of the thiolated beads.     

Photometrische Bestimmung von Antimon in Eisen und Stahl

Zusammenfassung Zur Bestimmung von 2,5–100 ppm Sb in Eisen, unlegierten und niedrig legierten Stählen sowie in Automatenstählen wird das Antimon zuerst in 2 Stufen vorisoliert mit Hilfe der Spurenfällung mit Mangan(IV)-oxidhydrat als Spurenfänger und anschließender Jodidextraktion. Nach der Rückextraktion erfolgt die photometrische Bestimmung mit Methylfluoron in der wäßrigen Phase. Der relative Fehler beträgt ±5%, der Zeitbedarf für eine Einzelbestimmung 1,5 h.Herrn H. Sifirin danke ich für die sorgfältige Durchführung der Versuche.     

Amide-water interactions in cosolvent systems. I. Solubilities and apparent molar volumes of methyl paraben

Solubility and apparent molar volume data are used to demonstrate effects of amide alkylation on amide-water interactions at 25° C. Precise measurements were made of the apparent molar volumes of the amides in binary amide-water mixtures using a dilatometric technique. The results show that the apparent molar volumes of alkyl-substituted amides in water pass through a minimum at an amide concentration which varies inversely with the degree of alkylation. Further studies showed that the solubilities of methyl paraben (methyl-p-hydroxybenzoate) and naphthalene in various amide-water solvent systems increased in characteristic fashion with amide alkylation.