Detection and assessment of citrus tristeza virus antigens by computer-aided scanning densitometry

Citrus tristeza virus (CTV) extracted from Etrog citron (C.medica L.) was immunoprecipitated. The immunoprecipitate was fractionated by SDS-PAGE and western blotted onto nitrocellulose. The CTV antigens were determined by immunoblot analysis using rabbit anti-CTV IgG, and the protein-band pattern exhibited on the nitrocellulose was assessed by soft-laser scanning densitometry. The densitometric tracing revealed the presence of bands that were not visible to the naked eye. Using the superimposition mode of the instrument, it was also revealed that the protein-band patterns of different CTV samples were not identical. Computer-aided soft-laser scanning densitometry proved to be a powerful approach in the detection and assessment of protein bands revealed on nitrocellulose immunoblots, which we were previously unable to do employing conventional methods.     

毛细管电泳安培法检测中的在柱场放大效应

本文首次报道用安培电化学检测器探讨毛细管电泳分离的场放大进样效应，分析了系统峰的形成以及场放大进样对电泳分离检测的影响。采用２５μｍ内径毛细管电泳分离，对去甲肾上腺素（ＮＥ）和儿茶酚（ＣＡＴ）分别可达０．４ｎｍｏｌ／Ｌ和１．５ｎｍｏｌ／Ｌ的浓度检测限，有效提高了毛细管电泳安培法检测的灵敏度。     

Cloud point extraction of napropamide and thiabendazole from water and soil

The micellar extraction and enrichment of napropamide and thiabendazole using Genapol X 80 is described. Combined with their quantification by fluorescence, detection limits below 0.2 g/l with recovery rates of up to 95% were achieved. The recovery could be improved by lowering the extraction temperature and purificaton of the surfactants. This extraction method has been applied to the isolation and preconcentration of napropamide from standard soils. Experimental parameters affecting the recovery rates were examined.     

Mass distribution in a dynamic sample zone inside a flow injection manifold: modelling integrated conductimetric profiles

A mathematical model for fitting the experimental ICM (integrated conductimetric method) curves developed by the authors in a previous work, is presented for the first time in this study. The proposed model fits the experimental curves with great precision and allows to predict physical dispersion for single-line flow injection system. The correlation of the model’s parameters with typical reactionless FIA peak parameters is also assessed. The IDQ coefficient—a novel dispersion estimator previously reported by the authors—can also be predicted when operational FIA variables are changed. Experimental and modelled profiles are compared as a function of the system’s variables, showing an excellent agreement.     

Simultaneous Determination of Oxytetra- cycline, Doxycycline, Tetracycline and Chlortetracycline in Tetracycline Antibiotics by High-Performance Liquid Chromatog- raphy with Fluorescence Detection

A simple, rapid and sensitive high-performance liquid chromatographic method with fluorescence detection for the simultaneous determination of oxytetracycline, doxycycline, tetracycline and chlortetracycline was developed, and successfully applied to the analysis of commercial tetracycline antibiotics. The separation was performed on a reverse-phase C₁₈ column with a gradient elution composed of methanol and sodium acetate buffer (containing disodium ethylenediaminetetraacetate and calcium chloride, pH 8.10) as the mobile phase, and fluorescence detection at 532 nm (excitation at 380 nm). The detection limits for oxytetracycline, doxycycline, tetracycline and chlortetracycline were 0.1, 0.5, 0.3 and 0.4 g L^–1, respectively. Data with respect to precision and accuracy were reported and discussed.     

Selective detection and identification of Se containing compounds--review and recent developments

The complexity of selenium (Se) chemistry in the environment and in living organisms presents broad analytical challenges. The selective qualitative and quantitative determination of particular species of this element is vital in order to understand selenium's metabolism and significance in biology, toxicology, clinical chemistry and nutrition. This calls for state-of-the-art analytical techniques such as hyphenated methods that are reviewed with particular emphasis on interfaced separation with element-selective detection and identification of the detected selenium compounds. Atomic spectral element specific detection for monitoring chromatographic eluent enabled quantitative determination of selenium species in selenized yeast and qualitative measurement for breath samples. Gas chromatography with atomic emission detection (AED) of ethylated species and fluoroacid ion pair HPLC applied to the analysis of currently produced or archived selenized yeast and Brassica juncea have revealed the presence of a previously unrecognised Se-S amino acid, S-(methylseleno)cysteine.     

Computer-aided multichannel detection in high-performance liquid chromatography

Summary The development of a computer-aided rapid-scanning detector for HPLC based on the linear photodiode array UV-visible spectrophotometer is described. Chomatograms monitored at up to three wavelengths, with automatic capture of spectra for eluted peaks and post-run processing of spectral data to generate log₁₀ (A) spectra, second derivative and fourth derivative spectra, are described. Methods are reported for the analysis of forensic samples of diacetylmorphine (heroin) in the presence of the degradation products and potential contaminants caffeine, papaverine, 6-acetylcodeine, thebaine, 6-acetyl-morphine, procaine and morphine separated by HPLC. The novel use of second and higher derivative spectra for the qualitative characterisation of drugs and contaminants separated by HPLC is described.Presented at the 14th International Symposium on Chromatography London, September, 1982     

Determination of diethanolamine or <Emphasis Type="Italic">N</Emphasis>-methyldiethanolamine in high ammonium concentration matrices by capillary electrophoresis with indirect UV detection: application to the analysis of refinery process waters

Alkanolamines such as diethanolamine (DEA) and N-methyldiethanolamine (MDEA) are used in desulfurization processes in crude oil refineries. These compounds may be found in process waters following an accidental contamination. The analysis of alkanolamines in refinery process waters is very difficult due to the high ammonium concentration of the samples. This paper describes a method for the determination of DEA in high ammonium concentration refinery process waters by using capillary electrophoresis (CE) with indirect UV detection. The same method can be used for the determination of MDEA. Best results were achieved with a background electrolyte (BGE) comprising 10 mM histidine adjusted to pH 5.0 with acetic acid. The development of this electrolyte and the analytical performances are discussed. The quantification was performed by using internal standardization, by which triethanolamine (TEA) was used as internal standard. A matrix effect due to the high ammonium content has been highlighted and standard addition was therefore used. The developed method was characterized in terms of repeatability of migration times and corrected peak areas, linearity, and accuracy. Limits of detection (LODs) and quantification (LOQs) obtained were 0.2 and 0.7 ppm, respectively. The CE method was applied to the determination of DEA or MDEA in refinery process waters spiked with known amounts of analytes and it gave excellent results, since uncertainties obtained were 8 and 5%, respectively.     

Microchip capillary electrophoresis with amperometric detection for several carbohydrates

Microchip capillary electrophoresis (μCE) with amperometric detection at Cu electrode benefited fast separation and direct detection of carbohydrates. The working electrode of 50-μm Cu wire attached nearly against the channel outlet—4 μm, where it benefited collecting detection current and suppressing overwhelming noise. The use of alkaline medium was essential to separating and detecting carbohydrates, which dissociated into the sensitive alcolate anions. The 10-cm serpentine chip, though lengthening the migration time, it provided better efficiency. Sucrose, cellobiose, glucose, and fructose migrated from the outlet in 400 s +2000 V. The linear calibration plots ranging from 10 to 1000 μM with regression coefficients better than 0.996 were obtained. The injection-to-injection reproducibility of 1.24% (n=7) for glucose in peak current and 0.6% for migration times were excellent. The detection limit was low, down to 2.3 μM for glucose (S/N=3) or 27.6 attomole in mass detection.     

Automatic analysis of multiplex ligation-dependent probe amplification products (exemplified by a commercial kit for prenatal aneuploidy detection)

For use in routine prenatal diagnostics, we developed software and methods for automatic aneuploidy detection based on a commercial multiplex ligation-dependent probe amplification (MLPA) kit. Software and methods ensure a reliable, objective, and fast workflow, and may be applied to other types of MLPA kits. Following CE of MLPA amplification products, the software automatically identified the peak area for each probe, normalized it in relation to the neighboring peak areas of the test sample, computed the ratio relative to a reference created from normal samples, and compensated the ratio for a side effect of the normalization procedure that scaled all chromosomally normal DNA peak areas slightly up or down depending on the kind of aneuploidy present. For the chromosomes 13, 18, 21, X, and Y, probe reliability weighted mean ratio values and corresponding SDs were calculated, and the significance for being outside a reference interval around ratio 1.0 was tested. p < or = 1% suggested aneuploidy and 1 < p < or = 5% suggested potential aneuploidy. Individual peaks, where the normalized area was situated more than 4 SD from the corresponding reference, suggested possible partial deletion or gain. Sample quality was automatically assessed. Control probes were not required. Having used the software and methods for two years, we conclude that a reliable, objective, and fast workflow is obtained.