蚜虫警戒素类似物的合成

蚜虫警戒素类似物的合成黄锦霞，覃彩覃，钟建华，陈家威（湖北大学化学系武汉４３００６２）关键词蚜虫，警戒信息素类似物，合成１９７２年Ｂｏｗｅｒｓ等￣［１］从棉蚜Ａｐｈｉｓｇｏｓｓｐｙｉｉ等６种蚜虫中提取并鉴定了蚜虫警戒信息素的主成份为Ｅ－β－法尼烯（Ｅ...     

Suppression of red cell diffusional water permeability by lipophilic solutes

The inhibitory effect of a series of neutral lipophilic solutes (methanol, ethanol, n-propanol, iso-propanol, n-butanol, iso-amylalcohol, n-hexanol, diethylether, nitrobenzene, and pyridine) on the diffusional water permeability (Pd, tot) of bovine erythrocyte membrane at 25 degrees C was studied in comparison to that of p-chloromercuri benzoate (pCMB). Permeability data were obtained by measuring the transmembrane diffusional water exchange time tau(exch) using an 1H-T2 NMR technique. Maximal inhibition by approximately 50% of Pd, tot was produced by 2 mM pCMB which completely blocked the membrane water channels in 20 min, hence suggesting the channel-to-lipid diffusional water permeability ratio of about 1:1. Furthermore, the maximal inhibitory effect of pCMB in combination with the lipophilic solutes was lower than that of pCMB alone. As pCMB does not interfere with the lipid bilayer, and provided that it blocks the water channels in solute presence as well, this confirms that the solutes induce an increase in the lipid-mediated background water permeability contribution (Pd, lipid) by the formation of aqueous leaks in the membrane hydrophobic barrier. However, faster but less efficient in permeability inhibition than pCMB (either alone or combined with solutes) were the lipophilic solutes alone. Taken together, the results indicate that the lipophilic solutes suppress the membrane total permeability Pd, tot by two opposing effects: a reduction of its channel-mediated part (Pd, channel) to the extent exceeding that of a simultaneous Pd, lipid increase. The inhibitory potency of the solutes tested appears to be correlated with their solubility in the membrane medium.     

Efficient removal of unwanted signals in NMR spectra using the filter diagonalization method

It is often desirable to selectively remove corrupting or uninteresting signals from complex NMR spectra without disturbing overlapping or nearby signals. For biofluids in particular, removal of solvent and urea signals is important for retaining quantitative accuracy in NMR‐based metabonomics. This article presents a novel algorithm for efficient filtering of unwanted signals using the filter diagonalization method (FDM). Unwanted signals are modeled in the time domain using FDM. This modeled signal is subtracted from the original free induction decay. The resulting corrected signal is then processed using established workflow. The algorithm is found to be reliable and fast. By eliminating large, broad, uninteresting signals, many spectra can be subjected to fully automated absolute value processing, allowing objective preparation of spectra for pattern recognition analysis. Copyright © 2009 John Wiley & Sons, Ltd.     

Characterization of three saponins from a fraction using 1D DOSY as a solvent signal suppression tool. Agabrittonosides E–F. Furostane Saponins from Agave brittoniana Trel. spp. Brachypus

A careful NMR analysis, especially by 1D TOCSY and 1D ROESY, of a refined saponin fraction allowed us to determine the structure of three saponins from a polar extract of Agave brittoniana Trel. spp. Brachypus leaves. The use of 1D DOSY for the suppression of the solvent signal was useful to obtain the chemical shifts of anomeric signals. A full assignment of the ¹H and ¹³C spectral data for the new saponins, agabrittonosides E–F (1–2) and the well‐known Karatavioside C (3) and their methoxyl derivatives, is reported. The structures were established using a combination of 1D and 2D (¹H, ¹H‐COSY, TOCSY, ROESY, g‐HSQC, g‐HMBC and g‐HSQC‐TOCSY) NMR techniques and ESI–MS. In addition, the methoxylation of these furostane saponins in the presence of MeOH was studied. Copyright © 2010 John Wiley & Sons, Ltd.     

电化学石英晶体微天平研究界面电场对DNA杂交的影响

采用电化学石英晶体微天平, 现场监测不同界面电场下完全匹配的靶标DNA和不完全匹配的靶标DNA分别与寡聚核苷酸探针分子杂交的过程. 结果表明, 电极表面荷正电时DNA表观杂交效率比电极表面荷负电时高, 但假阳性比较显著; 而电极表面荷负电时能有效地抑制错配杂交. 探讨了引入界面电场后探针分子取向和微观作用力对DNA杂交的影响.     

用离子抑制色谱法分析二(2,2,6,6-四甲基-4-哌啶基)马来酸酯合成反应液

建立了用离子抑制色谱法分析二（２,２,６,６－四甲基－４－哌啶基）马来酸酯合成反应液的方法。平均回收率为９８．８％,相对标准偏差为０．５６％,测量的平均相对偏差不大于５．０％。方法简单、快速,可用于工艺条件的选择和质量检测。     

A two-point calibration method for quantifying organic binary mixtures using secondary ion mass spectrometry in the presence of matrix effects

Quantification of the composition of binary mixtures in secondary ion mass spectrometry (SIMS) is required in the analyses of technological materials from organic electronics to drug delivery systems. In some instances, it is found that there is a linear dependence between the composition, expressed as a ratio of component volumes, and the secondary ion intensities, expressed as a ratio of intensities of ions from each component. However, this ideal relationship fails in the presence of matrix effects and linearity is observed only over small compositional ranges, particularly in the dilute limits. In this paper, we assess an empirical method, which introduces a power law dependence between the intensity ratio and the volume fraction ratio. A previously published physical model of the organic matrix effect is employed to test the limits of the method and a mixed system of 3,3′-bis(9-carbazolyl) biphenyl and tris(2-phenylpyridinato)iridium (III) is used to demonstrate the method. This paper introduces a two-point calibration, which determines both the exponent in the power law and the sensitivity factor for the conversion of ion intensity ratio into volume fraction ratio. We demonstrate that this provides significantly improved accuracy, compared with a one-point calibration, over a wide compositional range in SIMS quantification and with a weak dependence on matrix effects. Because the method enables the use of clearly identifiable secondary ions for quantitative purposes and mitigates commonly observed matrix effects in organic materials, the two-point calibration method could be of significant benefit to SIMS analysts.     

A convenient guideline to determine if two Y‐STR profiles are from the same lineage

Y chromosome STR loci are used in forensics primarily for identification purposes by determining the male lineages. The Henan province in China has established a large Y‐STR (>200 000 profiles) database for criminal investigations. A large proportion of the Y‐STR profiles in the database were generated using either the Applied Biosystems Yfiler^? or Yfiler^? Plus PCR Amplification kits. The additional loci in the Yfiler Plus kit as compared to the Yfiler kit results in a concomitant cumulative mutation rate increase across the loci. Therefore, in those cases when two profiles have one to a few mismatched loci, it is difficult to determine if they are from the same lineage. In this study, 7405 unrelated male profiles were manually selected from the database. Analysis showed higher power of discrimination than the corresponding Yfiler haplotypes. Further, the distributions of the number of mismatched loci and the mismatched steps were generated for father‐son, grandfather‐grandson, uncle‐nephew, and cousins (i.e. one, two, three, and four meioses, respectively) by exhaustive pairwise comparison of the unrelated profiles using a dynamic programming approach. The same distributions were generated for unrelated pairs with mutation rates of the loci. With the distributions, the false negative and false positive rates were determined. Two Yfiler profiles with ≤2 mismatched loci or ≤2 steps are more likely from the same lineage than unrelated lineages, and two Yfiler Plus profiles with ≤4 mismatched loci or ≤5 mismatched steps are more likely from the same lineage.     

Investigation of colloidal graphite as a matrix for matrix‐assisted laser desorption/ionisation mass spectrometry of low molecular weight analytes

The analysis of low molecular weight compounds by matrix‐assisted laser desorption/ionisation mass spectrometry is problematic due to the interference and suppression of analyte ionisation by the matrices typically employed – which are themselves low molecular weight compounds. The application of colloidal graphite is demonstrated here as an easy to use matrix that can promote the ionisation of a wide range of analytes including low molecular weight organic compounds, complex natural products and inorganic complexes. Analyte ionisation with colloidal graphite is compared with traditional organic matrices along with various other sources of graphite (e.g. graphite rods and charcoal pencils). Factors such as ease of application, spectra reproducibility, spot longevity, spot‐to‐spot reproducibility and spot homogeneity (through single spot imaging) are explored. For some analytes, considerable matrix suppression effects are observed resulting in spectra completely devoid of matrix ions. We also report the observation of radical molecular ions [M^–●] in the negative ion mode, particularly with some aromatic analytes. Copyright © 2016 John Wiley & Sons, Ltd.     

Gradient‐based solvent suppression methods on a benchtop spectrometer

Benchtop NMR emerges as an appealing alternative to widely extend the scope of NMR spectroscopy in harsh environments and for on‐line monitoring. Obviously, the use of low‐field magnets induces a dramatic reduction of the spectral resolution leading to frequent peak overlaps. This issue is even more serious because applications such as chemical process monitoring involve the use of non‐deuterated solvents, leading to intense and broad peaks overlapping with the signals of interest. In this article, we highlight the need for efficient suppression methods compatible with flowing samples, which is not the case of the common pre‐saturation approaches. Thanks to a gradient coil included in our benchtop spectrometer, we were able to implement modern and efficient solvent suppression blocks such as WET or excitation sculpting to deliver quantitative spectra in the conditions of the on‐line monitoring. While these methods are commonly used at high field, this is the first time that they are investigated on a benchtop setting. Their analytical performance is evaluated and compared under static and on‐flow conditions. The results demonstrate the superiority of gradient‐based methods, thus highlighting the relevance of implementing this device on benchtop spectrometers. The comparison of major solvent suppression methods reveals an optimum performance for the WET‐180‐NOESY experiment, both under static and on‐flow conditions. Copyright © 2016 John Wiley & Sons, Ltd.