约瑟夫森结(阵列)与谐振器的耦合效应研究

利用一种新的电路模型系统研究了约瑟夫森结(阵列)与谐振器的耦合效应.以结的电压自锁定台阶幅度ΔI为目标值,得到了谐振电路的电阻R、谐振频率fr对耦合的影响规律,并给出了合理解释;以结阵列的相位互锁定强度IL为目标,研究了IL对锁定电压VL的依赖关系,同时,通过相关计算将其与通常电路模型下得到的结果进行了比较.     

嵌入到Fabry-Perot谐振腔的双晶约瑟夫森结阵列的阻抗匹配和相位锁定研究

在He等人所做的嵌入到Fabry-Perot谐振腔中约瑟夫森结阵列的微波辐照研究基础上,提出了同时实现约瑟夫森结阵列阻抗匹配和相位锁定的方法,进行了相关的电磁仿真和数值计算.双晶约瑟夫森结阵列被制作在YSZ双晶基片上,同时被嵌入到Fabry-Perot谐振腔内.通过在基片上制作与结阵列集成的串联馈电半波偶极天线阵,并对其结构进行优化实现了结与天线的匹配,数值计算表明结的辐射效率达到94%;利用天线阵辐射场的特征和对模型合理的设计,使Fabry-Perot谐振腔和基片同时谐振在合适的模式下,从而使结阵列与谐 关键词： 约瑟夫森结阵列 阻抗匹配 相位锁定 Fabry-Perot谐振腔     

圆形高斯镜平凹腔腔镜倾斜时光场模式分析

运用边界元素法把圆形高斯镜平凹腔的自再现模的衍射积分方程转化为有限阶矩阵方程。计算了谐振腔在理想情况和高斯反射率平面输出镜倾斜情况下基模的场强分布、相位分布和本征值。研究表明,腔镜倾斜使激光场模式分布沿发生倾斜的方向向镜边缘偏移,而且在腔镜倾斜较严重时模式分布发生畸变,不再是对称的拉盖尔-高斯基模分布。基模本征值随倾斜角增大而变小,光束远场分布变差。减小高斯分布反射率的膜斑半径,则能减弱因倾斜引起的模式畸变。     

宽阻带抑制的高温超导带通滤波器设计

提出了一种新型加载插指电容的U型阶跃阻抗谐振器,该谐振器可用于实现高温超导带通滤波器的宽阻带抑制。利用所提出的新型谐振器结构,设计并制作了一个4节切比雪夫型高温超导带通滤波器。滤波器中心频率为1026 MHz,带宽12.6 MHz,第一谐频频率5121 MHz,第一谐频与基频的比值为4.92,阻带抑制度优于60 dB。     

PID调节器在氧碘化学激光器谐振腔调腔中的应用

通过对由比例（P）、积分（I）和微分（D）三个单元组成的PID调节器基本原理的介绍,指出合理设定PID调节器的参数是消除扰动的影响并实现腔镜快速、准确而稳定地移动的关键。实验结果表明,在调腔过程中应用PID技术,提高了静态时谐振腔各腔镜的同心度,而且在一定程度上保证了出光过程中谐振腔内各个腔镜的同心度,使得减小远场光斑的漂移和变形成为可能。     

基于耦合T型空腔的多重法诺共振现象

提出由T型空腔和挡板组成的两种金属-电介质-金属(MIM)波导结构,分别为:正T型空腔结构和倒T型空腔结构,并应用有限元法系统地研究了该结构的透射特性.对于正T型空腔结构,仿真结果出现了双重法诺共振现象,并且共振波长可以通过改变T型空腔长度和高度进行调节.该结构有助于设计成敏感度达到1 620nm/RIU、品质因数为5.4×10~4的纳米传感器.对于倒置T型空腔,在波导中产生了多重法诺共振现象,其敏感度可达1 560nm/RIU,品质因数为9.37×104.该结构有望在光学集成回路,特别是纳米传感器、光束分路器方面具有广泛应用.     

Coupling influence on the refractive index sensitivity of photonic wire ring resonator

By taking the coupling effect into consideration, we study the resonance condition of a photonic wire microring resonator (PWRR) sensor and compare our results with the previous work. Simulation results show that the resonant wavelength and sensitivity strongly depend on the coupling strength. The difference caused by the coupling effect can be up to tens of nanometers for the resonant peak position and tens of nm/RIU for the sensitivity in a silicon-on-insulator (SOI) PWRR. Such a giant influence from coupling effect cannot be disregarded and should be considered seriously for the design and application of PWRRs. It also shows an alternative tuning technique by controlling the coupling strength.     

Elongated hexagonal ZnO micro-fence optical resonator

A highly symmetric ZnO micro-fence is prepared to form an optical resonator, which a symmetric array consisting of six elongated hexagonal microcolumns. It is found that the luminescence emission could be enhanced at the edge of ZnO micro-fence and the wavelength dependent light intensity could be influenced by its geometry. The optical characterization along with theoretical calculations and computer simulation analysis suggest that the Fabry-Perot and Cross-whispering gallery modes are generated in ZnO micro-fence. The individual ZnO micro-fence can regarded as an optical resonator structure. Furthermore, it is proposed that the source concentration around the substrate during the growth is a crucial factor for forming such a micro-fence.     

A Highly Accurate Refractive Index Sensor with Two Operation Modes Based on Photonic Crystal Ring Resonator

A 2D hole‐type hexagonal lattice photonic crystal is utilized, herein, to detect the refractive index change of the material infiltrated into the designed circular sensing area which also resembles a ring resonator. The accuracy of the detection process is enhanced considering the simultaneous shift of the resonance wavelengths and the intensity modulation which occur in two separate spectral regions. The presented structure has the ability to detect liquids, material concentrations in fluids and gases having refractive indices in the range of n = 1–2 with sensitivity and quality factor of 61 nm/RIU and 3000, respectively, for resonance‐wavelength‐shift‐based operation. The detection range of n = 1–1.4 with the sensitivity of S = 0.69 NI/RIU is achieved for the intensity‐based measurement and the results show good linearity in the operating range.     

Coplanar monolithic resonator for X-ray and synchrotron radiation

A scheme of a three-block monolithic X-ray resonator with Si \((04\bar 4,40\bar 4)\)-configuration single crystal for NiKα₂ and synchrotron radiation is proposed and realized experimentally. Specialties and advantages of the proposed scheme are given. It is shown that using asymmetric Bragg reflections makes possible to solve one of the basic problems of X-ray resonators, that of the input of radiation into the resonator and creation of the lossless cycle. The technology of fabrication of the resonator is described and the problems of raising the efficiency of its operation are considered.