Synthesis and characterization of four alkyl 2‐cyanoacrylate monomers and their precursors for use in latent fingerprint detection

Four novel cyanoacrylates, 2‐cyanoethyl 2‐cyanoacrylate, 1‐cyanoethyl 2‐cyanoacrylate, trideuteromethyl 2‐cyanoacrylate and pentadeuteroethyl 2‐cyanoacrylate have been synthesized using a Diels‐Alder protection/deprotection route involving anthracene. The common route for the synthesis of alkyl 2‐cyanoacrylates was found to be unsatisfactory for the production of small quantities of the targeted cyanoacrylates, which have potential as reagents for the mid‐infrared spectral imaging of fingerprints on difficult surfaces. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Dual crosslinked phenylethynyl end‐capped sulfonated polyimides via the ethynyl and sulfonate groups promoted by PEG

Typically, phenylethynyl (PE) end‐capped oligomides require a temperature of 370 °C for 1 h to develop a crosslinked system. A published method using poly(ethylene glycol)s (DM‐PEG‐250 and PEG‐400) as cosolvents with NMP was effective in crosslinking the ethynyl end‐caps at 250 °C/3 h in nonsulfonated oligomides. The application of this novel crosslinked method to PE end‐capped sulfonated oligomides was effective but caused a secondary crosslinked network via the sulfonic acid groups and ethylene glycol solvents. The solid‐state ¹³C NMR spectral data on ¹³C‐labeled end‐caps in the PE‐3F‐SPI‐3 oligomide provide evidence for the ethynyl to ethynyl and ethylene oxide sulfonate ester dual crosslinked structure. Infrared spectroscopy of model compounds also provides evidence for the presence of crosslinked sulfonate ester and appended sulfonate ester side chains. ¹³C NMR also provided quantitative data on the extent of the ethynyl to ethynyl crosslinking reaction and sulfonate ester crosslinks and side chains. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

On the deformation induced order–disorder transitions in the crystalline phase of polyamide 6

The present paper deals with the mechanically induced structural changes in polyamide 6 with initial α or γ crystal phases. By combining Wide Angle X-ray Scattering with FTIR spectroscopy measurements, order–disorder transitions have been clearly evidenced at 70 °C in both cases. The origin of this phenomenon is ascribed to structural defects involved in plastic deformation. By contrast, at 150 °C, no major transformation is revealed in α phase, whereas when starting from γ crystals, a γ−α transition is clearly evidenced. The central role of intracrystalline molecular mobilities is pointed out to account for the observed behaviours as a function of temperature.     

Conversion of covalent to ionic character of V2O5–CeO2–PbO–B2O3 glasses for solid state ionic devices

xV₂O₅–xCeO₂–(30−x)PbO–(70−x) B₂O₃ glasses are synthesized by using the melt quench technique. The number of studies such as XRD, density, molar volume, optical band gap, refractive index and FTIR spectroscopy are employed to characterize the glasses. The band gap decreases from 2.20 to 1.78 eV and density increases from 3.49 to 4.25 g/cm³. FTIR spectroscopy reveals that incorporation of V₂O₅ in glass network helps to convert the structural units of [BO₃] into [BO₄]. At higher concentration of vanadium, VO vibration of [VO₅] structural units and V–O–V vibration are present. The bond ionicity of glasses increases with incorporation of V₂O₅ contents.     

Fine structure of far infrared spectrum of ethanol in the lowest OH-torsional vibrational trans-state (e0) of ethanol

In this report the spectroscopic results for far infrared Fourier transform spectrum corresponding to the b-type transitions within the lowest lying trans-substrate (e₀) have been presented. The calculated matrix elements connecting various K-levels suggest that ΔK = 1 transitions within the trans- subs-state should be quite strong but the transitions between the trans state to the gauche states would quite week (practically non-existent). This was also concluded by previous studies using microwave and millimeter wave regions (Pearson et al., 1982; Millar, 1995). The assignments were confirmed by direct observations at the spectrum and the agreement between the observed and calculated spectrum using precise energy levels reported by Pearson et al. (1982). All the strong ^RR and some ^RQ branch lines starting from K = 10 ← 9 through K = 24 ← 23 have been identified. State dependent expansion parameters for all the 15 sub-bands have been presented. These parameters can reproduce the experimental wave numbers within experimental uncertainty. An atlas for about 450 transition lines corresponding to transitions within the e₀ torsional–vibrational species has been prepared. To our knowledge this is the first time the high resolution far infra-red spectral region study for ethanol have been performed.     

Isotactic polypropylene reversible crystallization investigated by modulated temperature and quasi‐isothermal FTIR

Modulated temperature techniques allow to separate the reversing and non‐reversing contributions of material transitions. To investigate reversible crystallization and melting of isotactic polypropylene (iPP) at microstructural level, in this research, modulated temperature Fourier transform infrared (MTFTIR) and quasi‐isothermal FTIR (QIFTIR) analyses are used. By following the intensity variation of iPP regularity bands, associated with 3₁ helix structures of different lengths (n repeating units), MTFTIR evidences that, independently from helix length, a reversing coil–helix transition takes place few degrees below the non‐reversing crystallization onset. By comparing spectroscopic and differential scanning calorimetry experiments performed in quasi‐isothermal conditions, the reversing transition was found to be associated with the reversible melting‐crystallization phenomenon. Moreover, QIFTIR evidences that helices of different lengths contribute differently to the reversible transition: the helices composed of n = 10 and n = 12 are active into all the explored temperature range (30–130 °C) whereas the shortest (n = 6) and the longest (n > 15) helices contribute to reversibility at T > 100 °C. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 922–931     

Spectroscopy investigation of nanometric cobalt ferrite synthesized by different techniques

Cobalt ferrite (CoFe₂O₄) has been prepared by various wet-chemical techniques, namely: co-precipitation, organo-chemical, wet-chemical oxidation, citrate precursor, polymeric and pyrolysis techniques. X-ray diffractometry was employed to confirm the single phase spinel structure formation and to determine the cell-edge parameter. The optical properties were studied by using Fourier-transform infrared transmission spectroscopy (FTIR) and Raman spectroscopy at 300 K.     

闹羊花与野菊花红外光谱的分析与鉴定

采用傅里叶变换红外光谱对杜鹃花科植物闹羊花与菊科植物野菊花两种花类中药材的主成分进行表征,其中闹羊花出现在1 648和1 543cm-1出现明显的酰胺Ⅰ带和酰胺Ⅱ带吸收峰,证明其中含有蛋白质,可能与其具有的免疫作用相关;野菊花出现在1 734和1 515cm-1等CO伸缩振动吸收峰,证明其中含有挥发油等酯类成分。由于二者的红外光谱具有较高的相似性且难以区分,通过二级鉴别比较闹羊花与野菊花的二阶导数红外光谱可看出,在1 656和1 515cm-1附近的吸收峰,表明二者均含有黄酮类成分;野菊花的二阶导数谱图中出现在1 163,1 077,1 026,986和869cm-1的吸收峰与菊糖的特征吸收峰一致,因此可以看出野菊花中含有菊糖。选取不同波数范围的闹羊花与野菊花的二维相关红外光谱进行对比,发现在1 700~1 400cm-1黄酮类成分区域闹羊花有3个明显的自动峰,野菊花有10个明显的自动峰;在1 250~900cm-1糖苷类成分区域闹羊花有10个明显的自动峰,野菊花有9个明显的自动峰。红外光谱的"三级鉴定法"为中药材的鉴别提供更快速、准确、方便的手段。     

Toughening Effect of Ethylene Propylene DieneTerpolymer-Graft-Styrene-Acrylonitrile Copolymer (EPDM-g-SAN) on SAN Resin

The reaction product EPDM-g-SAN, synthesized by suspension graft copolymerization of styrene (St) and acrylonitrile (AN) in the presence of ethylene-propylene-diene terpolymer (EPDM), was blended with a commercial styrene-acrylonitrile copolymer (SAN resin) to prepare AES blends with high impact strength. The effects of AN mass percentage in the St-AN comonomer mixture (f _AN), EPDM mass percentage in the feed of EPDM and St-AN (f _EPDM) and reaction time on monomer conversion ratio (CR), grafting ratio (GR), and AES notched Izod impact strength were characterized. The notched Izod impact strength of AES containing 15 wt% EPDM reached its maximum with f _AN of 40 wt% and f _EPDM of 45 wt%; this was attributed to the polarity of the SAN copolymer obtained being appropriate with that of the SAN resin matrix. The dependences of GR and the notched Izod impact strength of AES containing 25 wt% EPDM on the reaction time were in rough agreement. The effect of EPDM content on the AES notched Izod impact strength indicated that the brittle-ductile transition of AES occurred for an EPDM content from 12.5 to 15 wt%. TEM and SEM analysis showed that the phase structure of AES exhibited a “salami” like structure, and the toughening mechanism of AES was shear yielding of the SAN resin matrix, which endowed AES with excellent toughness.