具有反铁磁相互作用的双铁磁链中的非线性激发

采用双子格模型和相干态表示,研究了链与链之间存在反铁磁相互作用的双铁磁链系统中的非线性激发的性质,得到了孤子的宽度,能量及有效质量。结果表明在不同情况下的各向异性双铁磁链中可以激发拓扑性孤子或非拓性孤子或非拓生反孤子。     

拓扑绝缘体基铁磁/f-波超导隧道结Andreev反射研究

基于Bogoliubov-de Gennes方程和Blonder-Tinkham-Klapwijk理论研究了三维拓扑绝缘体基铁磁/各向异性f-波超导隧道结的Andreev反射,其中f-波超导体选取f₁和f₂-波两种配对势.研究发现,对于f₁和f₂波,铁磁体中的磁能隙可以增强传统的Andreev逆向反射,但对Andreev镜面反射有抑制作用;但随着施加在超导体顶部电极上的栅极电位的增加,两种类型的反射都会增强.通过改变磁能隙,可以调节两种反射在准粒子输运过程中占有优势的程度.这些结果提供了一种实验检测拓扑绝缘体薄膜中镜面Andreev反射的方法.此外,隧穿电导和散粒噪声谱的差异可用于区分f₁和f₂波配对势.     

Frequency-stabilized seed laser system for dial applications around 0.94 μm

Absolute frequency stabilization of an extended-cavity diode laser at 0.94 μm is reported. The diode laser was frequency locked against rovibrational absorption lines of water vapour by using the frequency modulation spectroscopy technique. The stabilized oscillator shows a short-term frequency stability level of 40 kHz for integration times of 1 s and a long-term frequency drift lower than 10 MHz for observation times longer than 10³ s. The frequency-stabilized oscillator system is mounted on a compact breadboard (75 cm×50 cm) and constitutes the seed laser system for the injection of a high-energy DIAL laser transmitter operating in the 0.94-μm spectral region.     

柔性机构动态可靠性分析的新方法

为了改善柔性机构动态可靠性分析的效率和精度,基于支持向量机SVM(Support Vector Machine)回归理论,提出了一种柔性机构动态可靠性分析高效率高精度的SVM回归极值法SREM(SVM Regression Extremum Method)。首先,介绍了柔性机构可靠性分析的基本理论;其次,融合蒙特卡洛法MC(Monte Carlo)和SVM回归理论,建立了柔性机构动态响应极值的代理模型,并利用代理模型进行柔性机构可靠性分析。最后,利用SREM法对柔性机构实例进行了可靠性分析,并与MC和人工神经网络ANN(Artificial Neural Networks)的分析结果进行比较。结果显示,在小样本情况下,进行柔性机构动态可靠性分析时,SREM的计算效率和计算精度都比ANN高;SREM的计算效率比MC大大提高,计算精度与MC相当。验证了在柔性机构可靠性分析中SREM的高效率和高精度,并证明了SREM在柔性机构可靠性分析中的可行性和有效行性。     

The origin of noncollinear anisotropies and asymmetric magnetization reversal in FM/AFM bilayer system

The effects of the magnitude of the uniaxial anisotropy of a ferromagnet and the cooling field on the noncollinearity between uniaxial anisotropy and induced unidirectional anisotropy in a ferromagnet/antiferromagnet bilayer system are investigated. A diagram of noncollinear anisotropies and relative negative (positive) exchange bias field dependence upon cooling field and uniaxial anisotropy of the ferromagnet is obtained. The numerical result shows that the emergence of noncollinear anisotropies originates from the action of the cooling field and uniaxial anisotropy of the ferromagnet. The noncollinearity strongly depends on the magnitude of cooling field and uniaxial anisotropy of the ferromagnet. Moreover, the effect of noncollinear anisotropies and applied field on asymmetric magnetization reversal is also investigated. Amazingly, when the magnetic field is applied collinearly with unidirectional anisotropy, the hysteresis loop of ferromagnet/antiferromagnet bilayers is always symmetric even if there are noncollinear anisotropies. Our results indicate that the asymmetry of the hysteresis loop only originates from the noncollinearity between the induced unidirectional anisotropy and the applied field, rather than from the noncollinearity between the uniaxial and unidirectional anisotropies.     

拓扑绝缘基铁磁/铁磁超导隧道结的磁效应和塞曼效应(英文)

运用拓展的BTK理论研究了拓扑绝缘层上铁磁/铁磁超导隧道结的磁效应和塞曼效应,同时考虑了铁磁体和铁磁超导体之间的费米能级错配效应.研究发现:在该系统中塞曼效应和邻近效应可以共存;铁磁体和铁磁超导体之间的费米能级错配效应能够增强系统中发生在eV=Δ处的Andreev谐振散射过程和邻近效应.     

铁磁/反铁磁/铁磁三层膜系统中反铁磁自旋结构及其交换各向异性

研究铁磁/反铁磁/铁磁三层膜中界面存在二次以及双二次交换耦合下反铁磁磁矩转动及其交换各向异性.结果表明,其反铁磁膜中的磁矩转动存在可逆"恢复行为"、不可逆"连续倒转行为"以及不可逆"中断倒转行为"三种情形,三种情形的出现强烈地依赖于两界面处的线性耦合和双二次耦合.钉扎界面的交换耦合与旋转界面的交换耦合相互竞争,当钉扎界面耦合占主导时,反铁磁磁矩发生可逆"恢复行为",系统出现交换偏置.在旋转界面耦合占主导情形下,其线性耦合与双二次耦合也相互竞争,分别导致反铁磁磁矩发生不可逆"连续倒转行为"和不可逆"中断倒转行为",系统都不出现交换偏置,但矫顽场都得以增强.相关结论为实验上观测的磁滞能耗以及界面垂直耦合提供了可能的解释.     

The digital predistortion of non-linear frequency modulation of voltage-controlling-oscillator in MM-band

The reason and rectification method of the non-linear frequency modulation of voltage-controlling-oscillator in millimeter-wave band have been presented in this paper. The digital predistortion for the controlling signal of the varactor in VCO possesses high rectification sensitivity, simple circuit and convenient adjustment. The method can be used in mm-wave and microwave VCOs that are fabricated by all kinds' transmission lines, and can eliminate the dispersion of FM characteristic in VCOs that are usually caused by the machining deviation and the inconsistent parameters of semiconductors. The digital predistortion technique has been applied in NRD-guide VCO in Ka-band, which main performances are: f0 = 36.30648GHz, the frequency-stability reaches 2.26×10^–5, the maximum frequency-deviation is 150MHz, the linear-FM error is less than 5%.     

The temperature-dependent phase diagrams of the spin-3/2 Ising model on a FM/AFM two-layer lattice with a crystal field

The temperature-dependent phase diagrams of the spin-3/2 Ising model on a two-layer Bethe lattice with ferromagnetic (FM)/antiferromagnetic (AFM) intra-layer and either FM or AFM type inter-layer interactions are investigated under a constant magnetic field (H) and in the presence of a crystal field (D) by using exact recursion equations in a pairwise approach for coordination numbers q=3,4 and 6, in detail. In the light of the ground-state (GS) phase diagrams, the temperature-dependent phase diagrams of the model are obtained by studying the thermal variations of the order parameters, response functions and free energy. Then, they are illustrated on the (kT/J₁,J₃/J₁) and (kT/J₁,J₂/J₁) planes for the given system parameters. It is observed that the system exhibits first- and second-order phase transitions for all q values, and hence, in some cases, tricritical points. The existence of critical-end points and that of isolated points are also observed. The re-entrant behavior owes its presence to the two Néel temperatures, T_N, that are present for all q.     

Liquid phase separation of proteins based on electrophoretic effects in an electrospray setup during sample introduction into a gas-phase electrophoretic mobility molecular analyzer (CE–GEMMA/CE–ES–DMA)

Nanoparticle characterization is gaining importance in food technology, biotechnology, medicine, and pharmaceutical industry. An instrument to determine particle electrophoretic mobility (EM) diameters in the single-digit to double-digit nanometer range receiving increased attention is the gas-phase electrophoretic mobility molecular analyzer (GEMMA) separating electrophoretically single charged analytes in the gas-phase at ambient pressure. A fused-silica capillary is used for analyte transfer to the gas-phase by means of a nano electrospray (ES) unit. The potential of this capillary to separate analytes electrophoretically in the liquid phase due to different mobilities is, at measurement conditions recommended by the manufacturer, eliminated due to elevated pressure applied for sample introduction. Measurements are carried out upon constant feeding of analytes to the system. Under these conditions, aggregate formation is observed for samples including high amounts of non-volatile components or complex samples. This makes the EM determination of individual species sometimes difficult, if not impossible. With the current study we demonstrate that liquid phase electrophoretic separation of proteins (as exemplary analytes) occurs in the capillary (capillary zone electrophoresis, CE) of the nano ES unit of the GEMMA. This finding was consecutively applied for on-line desalting allowing EM diameter determination of analytes despite a high salt concentration within samples. The present study is to our knowledge the first report on the use of the GEMMA to determine EM diameters of analytes solubilized in the ES incompatible electrolyte solutions by the intended use of electrophoresis (in the liquid phase) during sample delivery. Results demonstrate the proof of concept of such an approach and additionally illustrate the high potential of a future on-line coupling of a capillary electrophoresis to a GEMMA instrument.