Synthesis and characterization of SPE membrane based on sulfonated FEP‐g‐acrylic acid by radiation induced graft copolymerization for PEM fuel cell

A Novel solid polymer electrolyte (SPE) membrane containing both ? COOH and ? SO₃H group has been prepared by simultaneous method of radiation grafting of acrylic acid onto FEP followed by sulfonation. The presence of weakly acidic acrylic acid controls the swelling in water while ? SO₃H group provides conductivity due to its strongly ionic characteristic. FEP‐g‐acrylic acid and its sulfonated derivatives were characterized by their properties. While the mechanical properties decreased, other properties such as ion exchange capacity (IEC), water uptake and ionic conductivity increased with increase in graft content. These properties further changed on sulfonation. Acrylic acid being weakly acidic in nature, conductivity values of the grafted membrane were quite low. However, introduction of strong ? SO₃H group resulted in conductivity closer to Nafion 117. Few sulfonated membranes have been tested with respect to H₂/O₂ fuel cell performance. Short‐term fuel cell test for 100 hr gave a stable performance. These membranes are less expensive compared to Nafion. Copyright © 2004 John Wiley & Sons, Ltd.     

X-Ray Crystallography and Free Energy Calculations Reveal the Binding Mechanism of A2A Adenosine Receptor Antagonists

We present a robust protocol based on iterations of free energy perturbation (FEP) calculations, chemical synthesis, biophysical mapping and X-ray crystallography to reveal the binding mode of an antagonist series to the A_2A adenosine receptor (AR). Eight A_2AAR binding site mutations from biophysical mapping experiments were initially analyzed with sidechain FEP simulations, performed on alternate binding modes. The results distinctively supported one binding mode, which was subsequently used to design new chromone derivatives. Their affinities for the A_2AAR were experimentally determined and investigated through a cycle of ligand-FEP calculations, validating the binding orientation of the different chemical substituents proposed. Subsequent X-ray crystallography of the A_2AAR with a low and a high affinity chromone derivative confirmed the predicted binding orientation. The new molecules and structures here reported were driven by free energy calculations, and provide new insights on antagonist binding to the A_2AAR, an emerging target in immuno-oncology.     

Oversampling Free Energy Perturbation Simulation in Determination of the Ligand-Binding Free Energy

Determination of the ligand-binding affinity is an extremely interesting problem. Normally, the free energy perturbation (FEP) method provides an appropriate result. However, it is of great interest to improve the accuracy and precision of this method. In this context, temperature replica exchange molecular dynamics implementation of the FEP computational approach, which we call replica exchange free energy perturbation (REP) was proposed. In particular, during REP simulations, the system can easily escape from being trapped in local minima by exchanging configurations with high temperatures, resulting in significant improvement in the accuracy and precision of protein–ligand binding affinity calculations. The distribution of the decoupling free energy was enlarged, and its mean values were decreased. This results in changes in the magnitude of the calculated binding free energies as well as in alteration in the binding mechanism. Moreover, the REP correlation coefficient with respect to experiment ( R^REP = 0.85 ± 0.15 ) is significantly boosted in comparison with the FEP one ( R^FEP = 0.64 ± 0.30 ). Furthermore, the root-mean-square error (RMSE) of REP is also smaller than FEP, RMSE^REP = 4.28 ± 0.69 versus RMSE^FEP = 5.80 ± 1.11 kcal/mol, respectively. © 2019 Wiley Periodicals, Inc.     

Cation exchange membranes by pre-irradiation grafting of styrene into FEP films. II. Properties of copolymer membranes

The structure and some physico-chemical properties of radiation grafted FEP-g-polystyrenesulfonic acid proton exchange membranes were studied as a function of the degree of grafting. The distribution of grafted polymer across the membrane thickness was obtained from microprobe measurements. It was found that for low levels of grafting (ca. 3%), polystyrene chains are located near the membrane surface only, and the interior of the membrane remains ungrafted. With the increasing degree of grafting, polystyrene chains were incorporated into the interior of the membrane as well. An almost homogeneous distribution of grafts in the membrane was obtained at a graft level of > 13%. The influence of the degree of grafting on membrane properties, such as ion exchange capacity, swelling, and specific resistivity was studied. Three different states of water, viz., freezing free, freezing bound, and nonfreezing water have been identified in noncrosslinked membranes. However, the nature and the amount of crosslinker had a profound influence on the states of water in a membrane. © 1996 John Wiley & Sons, Inc.     

Optical and dielectric properties of fluorinated ethylene propylene and tetrafluoroethylene–perfluoro(alkoxy vinyl ether) copolymer films modified by low energy N and C ion beams

Fluorinated ethylene propylene (FEP) and tetrafluoroethylene–perfluoro(alkoxy vinyl ether) (PFA) copolymer films were irradiated in vacuum with 60 keV C⁴⁺ and N⁴⁺ ions to fluences ranging from 1.0×10¹² to 5.0×10¹⁵ cm⁻². Changes in optical and dielectric properties were analyzed by spectroscopic ellipsometry and ultraviolet–visible (UV–vis), Raman and dielectric relaxation spectroscopies. Direct and indirect energy band gap values were determined from the absorption edge in the 200–800 nm region using Tauc's relation. The values of the direct energy gap have been found to be greater than the corresponding values of the indirect energy gap. Significant changes in the index of refraction, and β and γ dielectric relaxations were observed in the case of N⁴⁺ irradiated FEP and PFA samples.     

Rheological characterization of well-defined tetrafluoroethylene/hexafluoropropylene copolymers

The rheology of tetrafluoroethylene/hexafluoropropylene (TFE/HFP) copolymers, also known as Teflon FEP polymers, having different molecular weight and composition (HFP content) was studied by means of a parallel-plate rheometer. Two groups of polymers having different molecular weights with nearly constant polydispersity (around 2.5) were considered; namely, one group having a relatively low melting temperature (amorphous with a high content of HFP) and a second group having a higher melting point (semi-crystalline with a lower content of HFP). The relaxation time spectrum, H(λ), calculated by use of the BSW model (developed for monodisperse linear polymers) followed a scaling relationship in the terminal zone with scaling exponent of 0.13. However, at higher frequencies the model fails to predict adequately the experimental data. The longest relaxation time calculated from both the BSW model and discrete relaxation spectra (λ _i ,g _i ), which was determined by use of a parsimonious fitting software, depends on the molecular weight in a similar way as the zero-shear viscosity does with the well-established scaling factor of 3.4. The critical molecular weight for the onset of entanglements, M _c , was found to be about 100000, a value much higher than those previously reported in literature for other polymers. The rheology of resins in the second group (higher melting point) was found to exhibit a strong dependence on thermal history during oscillatory-shear measurements. The data obtained in experiments at different temperatures without a preheating to a certain value (330°C) exhibited a violation of the time-temperature superposition principle and no well-defined values of the zero-shear viscosity. This is attributed to residual crystallinity even at temperatures well above their melting point (260°C). However, the same experiments with preheating and subsequent cooling to desired temperature resulted into a very good time-temperature scaling. Received: 13 January 1998 Accepted: 6 April 1998     

面向空耦电声换能器应用的高性能FEP/PTFE复合膜压电驻极体

压电驻极体(也称为铁电驻极体)是一类具有强压电效应的微孔结构驻极体材料,具有柔韧、低密度、低特性声阻抗等特征,是制备柔性空气耦合声电换能器的理想材料.针对器件对高灵敏度和高温工作环境的应用需求,本文报道高性能氟化乙丙烯/聚四氟乙烯(FEP/PTFE)复合膜压电驻极体的制备和性能表征.研究结果表明,FEP/PTFE膜的特...     

Chemical bond formation during laser bonding of Teflon FEP and titanium

Teflon^® FEP (fluorinated ethylene propylene) is resistant to most chemical solvents, is heat sealable and has low moisture uptake, which make this polymer attractive as a packaging materials for electronics and implantable devices. Teflon^® FEP/Ti microjoints were fabricated by using focused infrared laser irradiation. Teflon^® FEP/Ti interfaces were studied by using X-ray photoelectron spectroscopy (XPS), Auger electron spectroscopy (AES) and scanning electron microscopy coupled with energy dispersive spectroscopy (SEM-EDS). The XPS results give evidence for the formation of Ti-F bonds in the interfacial region. The AES and SEM-EDS results show that the chemical bond formation occurs only in the actual bond area. No evidence for chemical bond formation was found in the heat affected zone surrounding the laser bonds.     

Radiation‐grafted solid polymer electrolyte membrane: thermal and mechanical properties of sulfonated fluorinated ethylene propylene copolymer (FEP)‐graft‐acrylic acid membranes

Acrylic acid was grafted onto fluorinated ethylene propylene copolymer (FEP) using a simultaneous radiation technique and the resulting membranes were subsequently sulfonated. Thermal and mechanical properties of these membranes were investigated and were found to be strongly influenced by the degree of grafting. Thermogravimetric analysis (TGA) of these membranes showed that these membranes undergo multistep degradation unlike virgin FEP which degrades in a single step. Glass transition temperature and degree of crystallinity were determined by differential scanning calorimetry (DSC). Glass transition temperature increased while crystallinity decreased with increase in degree of grafting. Tensile strength and elongation at break were found to decrease on grafting and further on sulfonation. Copyright © 2004 John Wiley & Sons, Ltd.     

Free Energy Peturbation and Molecular Dynamics Simulation Studies on the Enantiomeric Discrimination of Amines by Dimethyldiketopyridino-18-Crown-6

Abstract

Discrimination of chiral amines by dimethyldiketopyridino-18-crown-6 (1) is studied by free energy peturbation (FEP) and molecular dynamics (MD) methods. 1 has two (S)-chiral centers and discriminates chiral amines through host-guest interactions. The optically active amines in this study are α-(1-naphthyl)ethylamine, methylbenzylamine, cyclohexylethylamine, and sec-butylamine. The trends in binding free energy differences obtained from FEP calculations were in excellent agreement with experimental results obtained in the gas phase. In order to explain the enantioselectivity of the host in terms of the host-guest interactions at the molecular level, we analyzed the structures generated by 10-ns MD simulations of host-guest complexes. The suggested chiral discrimination mechanism, the π-π interaction and the steric repulsion between the guest and the host, was verified by our MD simulation analysis.