用自制仪器演示光通信

介绍一种新的小型演示仪器.该仪器用于普通物理光通信实验教学,能形象生动地演示光信号的耦合、传输、解调以及还原。仪器结构简单,思路清晰,可操作性强,对学生有很强的演示性。     

压制观瞄系统多光谱光轴平行性调校技术研究

鉴于压制观瞄系统光轴平行性是实现精确压制的一项指标,其特殊性在于保证回转机械轴、可见光轴、激光光轴的平行性,提出一种采用双光楔对压制观瞄系统光轴进行调校的方法, 通过转动双光楔,使光轴发生偏转,从而完成各光轴的平行。通过分析压制观瞄系统的结构,重点介绍了双光楔调校的原理与方法,并建立数学模型。采用Matlab对数学模型进行仿真,基于该调校原理搭建实验装置进行试验,试验结果表明,采用双光楔进行光轴调校方法可使三轴调校后的平行度误差不超过0.1 mrad。     

Size‐Dependent Room Temperature Oxidation of Tin Particles

Using transmission electron microscopy, the size‐dependent room temperature oxidation of tin nanoparticles is studied. The oxide that forms during room temperature oxidation of Sn particles is amorphous SnO, and it retains this stoichiometry and structure over extended time periods. From the investigation of arrays of Sn nanoparticles with broad size distribution, under identical conditions, the Sn oxide thickness is evaluated as a function of size and oxidation time. The oxide thickness depends strongly on the size of the Sn nanoparticles, which is in excellent agreement with predictions for a Mott–Cabrera model corrected for a non‐uniform electric field. The results demonstrate the accelerated oxidation kinetics of nanoscale particles with high curvature, due to the amplified electric field at the interface to a continuously shrinking metal core.     

Spectral tuning of InGaAs/GaAs quantum dot infrared photodetectors with bandpass guided‐mode resonance filters

Quantum dot infrared photodetectors can be coupled with micro‐structured filters to create narrowband sensors. Guided‐mode resonance filters based on a high‐index dielectric slab can exhibit bandpass characteristics that are suitable for monolithic integration with focal‐plane arrays. Here, patterned Ge filters were integrated with InGaAs/GaAs quantum dot detectors to linearly tune their 77 K photoresponse peaks from 5.6 µm to 6.2 µm. The dark current was not influenced by these filters but the ability to narrow the photoresponse linewidth was limited by substrate scattering, which is often encountered with front‐side illumination architectures. (© 2014 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Propagation of elliptical Gaussian beam passing through apertured paraxial optical systems

The propagation of elliptical Gaussian beam passing through paraxial optical systems with aperture is investigated analytically by using tensor method. The approximate formula for propagation of elliptical Gaussian beam through hard apertured optical systems is derived based on the fact that the circ function can be expanded into a finite sum of complex Gaussian functions. The derived formula provides a convenient tool for treating the propagation and transformation of elliptical Gaussian beam through apertured optical systems. As an application example, the propagation properties of elliptical Gaussian beam through apertured fractional Fourier systems are discussed.     

300～1100nm多波段成像光学系统设计及杂光分析

设计了一套300～1100nm多波段光学系统,该系统能对目标的近紫外、可见光和近红外3个波段同时成像,可满足目标多波段信息探测的要求。由于在光学系统中镜筒内壁反射和棱镜表面反射会产生杂光和鬼像,因此,利用Light—Tools软件对此系统的杂光和鬼像进行了模拟分析。模拟结果表明,视场之外11．7—18．3°和-11．7～-18．3°的入射光线被胶合棱镜上下表面反射后,会聚焦到3个探测器靶面范围内,形成鬼像;6．2°-9．8°和一6．2°--9．8°的入射光线被镜筒反射后会在3个探测器上形成杂光。利用设计的多波段光学系统进行了相关实验,结果证明了模拟分析的正确性,表明此分析能用于指导多波段光学系统的设计和研制。提出了减少杂光和鬼像的相应措施,实验结果验证了提出的措施能够减少杂光及消除鬼像,提高系统成像质量。     

制备多模聚硅氧烷光波导关键技术的改进

本文利用浇铸法,使用M&N胶和OE6450两种聚硅氧烷制备光波导.通过改进制备光波导的多个关键技术, 解决了波导制备过程中的气泡问题、脱模问题、芯层不固化问题、芯层和覆盖层产生化学反应等难题,提出了 比较完备和科学的聚硅氧烷波导制备工艺流程,从而使得波导的制备成品率从原来低于40%提高到高于80%, 波导的最大长度从原来的21 cm增加到22.5 cm,波导的损耗(截断法测量结果)从最初的0.3dB/cm(850 nm)降低到了 0.21dB/cm(850nm).本文在波导制备技术方面具有重要的实际意义和价值.     

用液晶空间光调制器产生光阱阵列

液晶空间光调制器能够方便地用于制作各种衍射型光学元件, 但液晶空间光调制器存在分辨率有限的缺点, 本文提出了用液晶空间光调制器制作相位型光栅, 产生一维和二维光阱阵列的新方案, 用迭代傅里叶级数算法优化设计光栅的相位分布, 在不改变空间光调制器硬件参数设置的情况下, 充分利用和发掘了空间光调制器的优点, 同时又能较好地回避其所存在的缺陷. 根据现有的空间光调制器的技术参数, 模拟仿真设计光栅, 计算光强分布, 结果表明: 用大失谐、小功率激光照明, 能够产生具有很高峰值光强和光强梯度的光阱阵列, 囚禁冷原子的光学偶极势达到mK量级, 对原子的作用力远大于原子的重力.     

DFT(B3LYP/LanL2DZ), non-linear optical and electrical studies of a new hybrid compound: [C6H10(NH3)2]CoCl4·H2O

A new organic-inorganic material [C₆H₁₀(NH₃)₂]CoCl₄·H₂O was reported. The title compound was synthesized at room temperature by slow evaporation and then characterized by a single X-ray diffraction, spectroscopic measurements, thermal analysis and dielectric technique. It crystallizes in the non-centrosymmetric space group Pna2₁ with the following unit cell parameters: a=12.5328(1) Å, b=9.0908(1) Å, c=11.7440(1) and α=β=γ=90°. The structure can be described by the alternation of two different cationic-anionic layers. It consists of isolated H₂O, isolated [CoCl₄]²⁻ tetrahedral anions and diammoniumcyclohexane [C₆H₁₀(NH₃)₂]²⁺ cations, which are connected via N–H…Cl, N–H…O and O–H…N hydrogen bonds. The Hirshfeld surface analysis was conducted to investigate intermolecular interactions and associated 2D fingerprint plots, revealing the relative contribution of these interactions in the crystal structure quantitatively. Theoretical calculations were performed using DFT/B3LYP/LanL2DZ method for studying the molecular structure and vibrational spectra and especially to examine the non-linear optical behavior of the compound. Solid state ¹³C NMR spectrum shows three signals correspond to three different carbon environments. Thermal analysis discloses a phase transition at the temperature 315 K and the evaporation of water molecule at 327 K. A detailed dielectric study was reported and shows a good agreement with thermal measurements.     

Enabling arbitrary wavelength frequency combs on chip

A necessary condition for generation of bright soliton Kerr frequency combs in microresonators is to achieve anomalous group velocity dispersion (GVD) for the resonator modes. This condition is hard to implement in the visible as well as ultraviolet since the majority of optical materials are characterized with large normal GVD in these wavelength regions. We overcome this challenge by borrowing ideas from strongly dispersive coupled systems in solid state physics and optics. We show that photonic compound ring resonators can possess large anomalous GVD at any desirable wavelength, even if each individual resonator is characterized with normal GVD. Based on this concept, we design a mode‐locked frequency comb with thin‐film silicon nitride compound ring resonators in the vicinity of the rubidium D₁ line (794.6 nm) and propose to use this optical comb as a flywheel for chip‐scale optical clocks.