Spectral Characterization of Couplings in a Mixed Optomechanical Model *

Abstract:We study the spectrum of single-photon emission and scattering in a mixed optomechanical model which consists of both linear and quadratic optomechanical interactions. The spectra are calculated based on the exact long-time solutions of the single-photon emission and scattering processes in this system. We find that there exist some phonon sideband peaks in the spectra and there are some sub peaks around the phonon sideband peaks under proper parameter conditions. The correspondence between the spectral features and the optomechanical interactions is confirmed, and the optomechanical coupling strengths can be inferred by analyzing the resonance peaks and dips in the spectra.     

Two-Frequency Brillouin Fiber Laser Based on Bragg Grating Fabry-Perot Cavity

Abstract

A novel and simple two-frequency Brillouin fiber laser is presented. It is based on a fiber Fabry-Perot cavity with fiber Bragg gratings as reflectors. The model of stimulated Brillouin scattering in fiber grating–based Fabry-Perot resonator is investigated. The laser allows conversion efficiency of close to 100% and suppresses the higher-order Stokes waves. The theoretical prediction is presented and the experimental demonstration is realized.     

Study of semiconductor lasers under simultaneous uniaxial stress and hydrostatic pressure

Abstract

We present the design of a device for the simultaneous application of uniaxial stress and hydrostatic pressure. This new apparatus will for the first time allow measurements at constant strain. Results of the simultaneous application of uniaxial stress and hydrostatic pressure to a semiconductor laser are presented and discussed.     

Effect of pressure on the properties of DH diode lasers in AlxGa1-xAsySb1-y/GaSb system

Abstract

A helium pressure appparatus for diode laser studies up to 1.4 GPa at 77–300 K has been developed. DH lasers with Al_xGa_1-xAs_ySb_1-y active layers (x=0-0.05) lattice-matched to GaSb substrates have been investigated. It has been shown that in lasers with x,y=0 pressure dependences of the threshold current density (J_th) and the average electron lifetime at the threshold (τ) measured at 80 K depend strongly on the quadratic recombination of L^c ₆ electrons, the characteristic coefficient being 1.5×10^?11 cm³s^?1. The pressure-composition equivalence coefficient dx/dP=2.2×10^?10 Pa^?1 has been obtained for the lowest temperatures used.     

基于平行玻璃板的半导体激光器阵列光束整形

为得到质量均衡的大功率激光束,分别以条形和面阵半导体激光器为模型,基于平行玻璃板对光束的偏移作用,对准直后激光束进行分割和重排,并在Zemax软件中进行了仿真。条形半导体激光器初始发散角为40和10,整形前已准直光束快慢轴方向的光参数积分别为0.455 2 mmmrad和20.484 mmmrad,光束质量相差较大,整形后快慢轴方向光参数积分别为2.731 2 mmmrad和3.414 0 mmmrad,实现了快慢轴方向光束质量均衡。利用平行玻璃板消除面阵半导体激光器中存在的发光死区,整形后快慢轴方向光参数积分别为7.002 mmmrad和10.242 mmmrad ,整形系统耦合效率为90.13%。     

Fibre gratings and devices for sensors and lasers

Although mainstream grating writing, more often than not using single photon excitation of germanosilicate based defects with CW 244 nm light, remains the key technology for complex devices it is now being complemented by a whole host of processes which can enhance and tailor the properties of both conventional and not‐so‐conventional fibre Bragg gratings. Further, processes for writing of gratings in non‐germanosilicate fibres have also continued to develop and include multi‐photon excitation directly into the band edge of the glass. It is now possible to custom tailor a gratings property based on the application and the nature of production as well as custom tailor the grating writing process to suit the type of fibre and application. Examples and suggestions where these can benefit sensors and lasers are outlined.     

A High Efficiency Yb3+-doped Fiber Ring Cavity Laser with Narrow Line-widthRound-trip Dispersion Calculation for Martinez Pulse Stretcher

A novel Yb3+-doped fiber ring cavity laser pumped by a 977 nm laser diode is presented with its output laser wavelength of 1060 nm. Based on a fiber Bragg grating (FBG), the laser exhibits 0.20 nm line-width, 7.5 mW laser output power, 40 dB signal-to-noise ratio (SNR) and 66% slope efficiency.This paper proposed a ray-tracing model for the Martinez stretcher, derived the calculation formulae for the stretcher of a grating-spherical mirror system and discussed the error for the total dispersion resulted from the spatial dispersion. The calculated results show that the error could be ignored for the beam returned to the stretcher for the second pass in the wavelength range of 750 nm and 850 nm.     

液冷薄片构型激光器及其热管理技术

为了解决增益介质的热效应问题,提出了一种浸没式构型液冷激光器方案,该构型激光器在10Hz重复抽运频率下,获得了615mJ的能量输出,光光转换效率为21%,斜率效率为23%.基于流体力学和热力学原理,建立了激光器增益区流场的热-流-固耦合模型,利用软件模拟和有限元分析法,研究了在不同流速、泵浦功率条件下,整个增益区的温度场、速度场的分布特性;并基于增益区温度场的分布,分析了液冷条件下通过增益区的激光波前畸变特性.结果表明,增益介质的最大光程差为0.7666λ,冷却液最大光程差为-4.7331λ,说明该构型激光器有着良好的热管理性能.     

Measurement of στ product of solid state laser materials by an alternative method: Application to Nd3+ doped YVO4 crystal for 4 F 3/2→4 I 11/2 transition

In this paper an alternative approach for measurement of στ product for ⁴ F _3/2→⁴ I _11/2 transition of Nd³⁺ doped YVO₄ crystal is reported. In this method a microchip laser is formed by keeping a small piece of the sample in plane-plane resonator and a diode laser (808 nm) is used for pumping. The pump power induced thermal lensing effect is used to make the cavity stable. The cavity mode area is estimated by measuring the thermal lens focal length at the threshold and the average pump area is measured by Gaussian fit to the intensity profiles of the pump beam. The value of στ product of Nd:YVO₄ crystal obtained by this method is within 10% of the reported values. The advantage of this method is that it is a simple method for direct measurement of στ product of laser crystals.     

高功率激光稳定腔选模分析

讨论了在有限菲涅耳数时，稳定凹－凸腔的高功率激光选模特性，研究表明当稳定凹－凸腔工作在临近界稳区时，基模体积显著提高，具有良好的选模效果。