Generation of sub‐terahertz repetition rates from a monolithic self‐mode‐locked laser coupled with an external Fabry‐Perot cavity

A novel scheme to multiply the repetition rate of a monolithic self‐mode‐locked laser for generating sub‐terahertz pulse sources is successfully demonstrated. A coated Yb:KGW crystal is designed to achieve a self‐mode‐locked operation at a repetition rate of 24 GHz with an average output power exceeding 1.0 W at a pump power of 4.8 W. A partially reflective mirror is utilized to combine with the output surface of the gain medium to constitute an external Fabry‐Perot cavity. It is theoretically and experimentally verified that adjusting the external cavity length to satisfy the commensurate condition can lead to the frequency spacing to be various order harmonics of the mode spacing of the monolithic cavity. The maximum pulse repetition rate of the laser output can be up to 216 GHz and the pulse duration is as short as 330 fs. More importantly, the overall characteristics of the first‐order temporal autocorrelation traces obtained by sequentially scanning the external cavity.length display an intriguing phenomenon of temporally fractional revivals, similar to the feature of spatial Talbot revivals.

     

Structure and Performance Modulation of Self-Adhesive SIS/C5 Electrospun Membranes for Transdermal Drug Delivery北大核心CSCD

Electrospun membranes are widely utilized to enhance the water vapor permeability and drug delivery performance of transdermal drug delivery patches. Due to the lack of adhesion property,however,most of them cannot closely contact with skin,which impedes the delivery of drugs to the skin,thus affecting the transdermal administration. C5 resin is used to endow poly（styrene isoprene styrene）（SIS）electrospun membranes with pressure-sensitive adhesion property. Investigation is performed on how to control the structure,adhesion properties and drug delivery performance of SIS/C5 electrospun membranes loaded with synthetic capsaicin via compositions,drugs and electrospinning conditions. The results demonstrate that the electrospun membrane with a SIS/C5 ratio of 2∶1 has excellent water vapor permeability（7. 17×10－3 g/（h·cm2）and adhesion properties（180（°）peel strength is 0. 2 kN/m,tack force is 0. 64 N/cm2 ,holding power is greater than 7 days）. The synthetic capsaicin has good compatibility with the SIS/C5 electrospun membranes,in which no drug crystallizes and the drug loading is beneficial to improve the water vapor permeability. As the drug loading is 8%,the tack force is 0. 6～0. 8 N/cm2 ,the 180（°）peel strength is 0. 2～0. 3 kN/m,the holding power is greater than 7 days,and no residue is left during peeling tests. In vitro drug release indicates that the drug has a behavior of sustained release with a 24-hour cumulative release rate of greater than 50% for all SIS/ C5 electrospun membranes,meeting the requirements of transdermal drug delivery patches. © 2022, Science Press (China). All rights reserved.     

激光光源线宽对外差探测性能的影响

本文根据统计理论分析了激光线宽对外差探测结果的影响, 并讨论了激光线宽对杨氏干涉条纹对比度的影响. 本文基于解析结果做了数值仿真, 所得结果表明激光线宽增加时, 外差探测方式仍可以检测到中频信号, 但在线宽较大时, 受噪声影响无法准确地提取到中频频率. 为验证理论分析结果, 使用线宽为1 MHz的激光光源进行了8.1 km外场实验, 实验结果与数值分析结论一致, 即不会因为线宽增加而无法检测到中频信号. 文中所得结论对于外差探测光源的选择有重要指导意义, 因此根据测量目标的特性和测量要求, 可按照文中结论评估光源的线宽指标.     

基于阿秒抖动光纤锁模激光器的时钟同步

光纤锁模激光器结构简单, 运转稳定, 且输出的超短脉冲序列具有极高的时钟稳定性, 在抽运探测、脉冲相干合成等要求高精度时钟同步的前沿领域有着广阔的应用前景. 本文通过激光器腔内的电光调制器进行反馈控制, 实现了两台光纤锁模激光器之间的紧密时钟信号同步; 并且通过平衡光学互相关方法, 对残余的时钟误差信号进行了测量, 分辨率达到了13 as. 通过优化激光器的腔内动力学过程及反馈环路的参数, 在[1 Hz, 10 MHz]的积分区间内得到了109 as的残余时钟误差, 对应单台激光器的平均时间抖动为77 as.     

980nm半导体激光器输出光谱特性的改善

为了改善980nm半导体激光器的输出光谱特性,采用传输矩阵分析法推导了双布喇格光纤光栅谐振腔的传输表达式,对布喇格光纤光栅长度和谐振腔腔长对输出光谱的影响进行模拟仿真,结果表明布喇格光纤光栅长度对输出光谱的影响大于谐振腔腔长对输出光谱的影响,加长布喇格光纤光栅长度能压缩输出光谱线宽.在980nm半导体激光器尾纤上写入不同布喇格光纤光栅长度的双布喇格光纤光栅谐振腔,验证了引入双布喇格光纤光栅谐振腔在压缩980nm半导体激光器输出光谱线宽的同时改善了其输出光谱的稳定性.当环境温度在0~75℃范围内变化时,980nm半导体激光器输出中心波长仅变化0.06nm.     

稀有气体卤化物准分子激光器工作气体实时补给技术

为延长稀有气体卤化物准分子激光器工作气体使用寿命,在原有供气设备基础上增加了工作气体实时补给技术.该技术采用FPGA控制系统将逐步提高放电电压、补充卤素气体和更换部分混合气体等操作有效组合起来.随着激光脉冲能量的下降,逐步提高放电电压;当放电电压达到最大值时,开始补充卤素气体,并恢复放电电压;当补充卤素气体效果不明显时,更换部分混合工作气体.将该技术应用于医用型ArF准分子激光器中进行实验研究,结果表明:在没有使用工作气体实时补给技术的情况下,激光器累计工作14.38 h后,输出单脉冲激光能量下降了17.2％;采用工作气体实时补给技术后,激光器输出能量下降速率明显降低,累计工作14.38 h,其单脉冲能量下降率能控制在3％范围内.因此,采用该技术可延长激光器工作气体的使用寿命、提高输出激光能量稳定性、减少停机次数并降低运行成本.     

A study of the gasification of carbon black with molten salt of Li2CO3 and K2CO3 for application in the external anode media of a direct carbon fuel cell

The characteristics of gasification reactions for carbon–carbonate mixtures were experimentally investigated at high temperatures up to 900 °C, considering the application of the mixtures to the external anode media of a direct carbon fuel cell. A thermo-gravimetric analysis (TGA) was conducted in either a nitrogen or carbon dioxide ambient environment for Li₂CO₃, K₂CO₃ and a mixture of these two substances with carbon black. Changes in the exit gas composition were also monitored during the heating process. It was shown that gasification in the mixture media occurs much more rapidly than carbonate decomposition at elevated temperatures, even for low concentrations of CO₂. It was also shown that the loading of carbonates to carbon significantly affects the global gasification reaction; it increased the reaction rate by an order of magnitude and decreased its activation energy. Based on the experimental observations, a simplified reaction model of gasification was suggested for the anode media of a DCFC, regarding carbonate-catalysed and metal-catalysed pathways of Boudouard reactions.     

Different defect morphologies in polyethylene crystal induced by surface physicochemical properties

The physicochemical properties of surfaces have a great effect on the micro-morphologies of the crystal structures which are in contact with them.Understanding the interaction mechanism between the internal driving forces of the crystal and external inducing forces of the surfaces is the prerequisite of controlling and obtaining the desirable morphologies.In this work,the dynamic density functional theory was applied to construct the free energy functional expression of polyethylene(PE) lattice,and the micro-dynamic evolution processes of PE lattice morphology near the surfaces with different properties were observed to reveal the interaction mechanism at atomic scale.The results showed that the physical and chemical properties of the external surfaces synergistically affect the morphologies in both the defect shapes and the distribution of the defect regions.In the absence of the contact surfaces,driven by the oriented interactions among different CH2 groups,PE lattices gradually grow and form a defect-free structure.Conversely,the presence of contact surfaces leads to lattice defects in the interfacial regions,and PE lattice shows different self-healing abilities around different surfaces.     

光纤光栅对FBG-ECL静态特性的影响

光纤光栅外腔半导体激光器(FBG-ECL)在未来光通信系统占有着越来越重要的地位。根据FBG-ECL的等效腔模型,讨论了光纤光栅反射率、带宽对FBG-ECL的输出功率,阈值特性、边模抑制比等静态特性的影响。指出了存在最佳光纤光栅峰值反射率,不仅使得FBG-ECL具有更高的输出功率,而且可以获得极好的边模抑制比。最后根据实测在不同反射率下外腔激光器的激射光谱,发现理论分析结果和实验数据是吻合的。