毛细管色谱直接进样法测定白酒中高碳脂肪酸乙酯的研究

介绍了采用ＦＦＡＰ键合毛细管柱直接进样测定白酒中５种高碳脂肪酸乙酯的方法，操作简捷，定量准确，检测限低达０４ｍｇ／Ｌ。用该法测定了各种香型近９０个白酒样品。改变色谱条件后，在一次直接进样分析中除能测定高碳脂肪酸乙酯外，而且还能对白酒中醇、酯、醛、酮以及有机酸等５２种香味组分进行定量测定，结果重现性良好。     

乙酰化淀粉/DL-丙交酯接枝共聚物的合成及降解性能研究

用醋酸乙烯酯和玉米淀粉反应制备出了不同取代度乙酰化淀粉，再用乙酰化淀粉同DL－丙交酯接枝共聚合成乙酰化淀粉／DL－丙交酯接枝共聚物。研究了原料配比，淀粉取代度对接枝反应单体转化率（C％），接枝率（G％）接枝效率（GE％）和接枝支链数均分子量（Mn)的影响，结果表明在给定的试验条件下接枝共聚反应的C％，G％，GE％和Mn可分别达到40％，225％，80％和1．4万。接枝共聚物在磷酸缓冲溶液和户外土壤掩埋降解实验表明，在160天内样品失重率分别为71％和60％，表明合成的乙酰化淀粉／DL－丙交酯接枝共聚物具有很好的降解性能。     

乳液聚合共聚物玻璃化转变温度及其理论计算

从共聚单体的竞聚率、油相水相分布系数出发,通过动力学模拟计算了丙烯酸丁酯与醋酸乙烯酯乳液共聚物的链结构,并用Johnson公式对其玻璃化转变温度(T_g)进行了理论计算,给出了共聚物T_g及其对应聚合物的重量分布图。发现半连续共聚物有1个T_g,其值随共聚物组成而变化;但一步法共聚物有两个T_g:低温区T_g代表富丙烯酸丁酯共聚物,高温区T_g则代表PVA均聚物。计算结果与实验十分吻合。     

Quantitative thermogravimetric analysis of binary mixtures

Thermogravimetric analysis is used to determine the amounts of Mg(OH)₂ and Mg(CH₃COO)₂in a mixture thereof. The application and suitability of different analysis methods are discussed. In the first method the mass losses in the temperature ranges as indicated by the decomposition of the pure compounds were used. Results obtained using these temperature ranges were unusable. The percentage mass losses due to the decomposition of Mg(OH)₂ and Mg(CH₃COO)₂ were then determined in a second method using the minimum in the derivative mass vs. temperature curves. The results obtained by this method compared well with the actual values for mixtures containing more than 15% magnesium acetate. The third method employed the total experimental mass loss of both decomposition reactions. The results obtained using this method compared well to the actual values, giving a R ² value of more than 0.99. This method of using the total mass losses can however only be used for binary mixtures that consist only of magnesium hydroxide and magnesium acetate. This revised version was published online in August 2006 with corrections to the Cover Date.     

Effect of dimethylaminoethyl methacrylate on the graft copolymerization of ethyl acrylate onto hydroxypropyl methylcellulose in aqueous medium

Graft copolymerization of an ethyl acrylate (EA) and dimethylaminoethyl methacrylate (DMAEMA) monomer mixture onto water-soluble hydroxypropyl methylcellulose was investigated with potassium persulfate (KPS) as the initiator in an aqueous medium. The effects of introducing DMAEMA onto the graft copolymerization and the properties of the resulting latex that was produced were studied systematically. The optimum conditions for the graft copolymerization in terms of percentage of grafting and grafting efficiency were determined. The graft copolymer was characterized by Fourier transform infrared spectra, elemental analyses, nuclear magnetic resonance, transmission electron microscopy, and dynamic light scattering methods. The results suggest that the introduction of the DMAEMA monomer clearly accelerates the initial rate of the graft copolymerization, whereas the grafting parameters decrease significantly with increasing amounts of DMAEMA. These results can be attributed to the relatively large size of the DMAEMA molecule, its redox reaction with KPS, its hydrophilicity in water, and its chain transfer effect. The equilibrium humidity adsorption behavior and acid solubility of graft the copolymer films were also studied.     

Synthesis, characterization and thermal studies on cellulose acetate membranes with additive

Cellulose acetate (CA) membranes are used in ultrafiltration applications, although they show low chemical, mechanical and thermal resistance. In order to prepare membranes with improved properties, modification of cellulose acetate with polyethelene glycol (PEG 600) has been attempted. In this study, CA has been mixed with PEG 600 as an additive in a polar solvent. The effects of CA composition and additive concentration given by a mixture design of experiments on membrane compaction, pure water flux, water content and membrane hydraulic resistance have been studied and discussed. The efficiency of protein separation by the developed CA membranes have been quantified using model proteins such as pepsin, egg albumin (EA) and bovine serum albumin (BSA). The thermal stability of the developed membranes prepared with PEG 600 additive has also been investigated using thermogravimetric analysis and differential scanning calorimetry.     

TiSiW12O40/TiO2催化合成苹果酯

以固载杂多酸盐TiSiW12O40/TiO2为多相催化剂，通过乙酰乙酸乙酯和乙二醇反应合成了苹果酯，探讨TiSiW12O40/TiO2对缩酮反应的催化活性，较系统地研究了原料量比，催化剂肜量，反应时间诸因素对产品收率的影响，实验表明：TiSiW12O40/TiO2是合成苹果酯的良好催化剂，在n(乙酰乙酸乙酯）：n(乙二醇）＝1：1．5，催化剂用量为反应物料总质量的1．0％，环己烷为带水剂，反应时间50min的优化条件下，苹果酯的收率可达84．1％。     

醋酸烯丙酯选择性地合成烯丙基硒醚

醋酸烯丙酯被Pd(PPh3)4-SmI2还原，并发生中间体π-烯丙基钯络合物的极性 反转，而后与芳基硒溴化物作用，生成烯丙基硒醚．     

The Chemical Constituents from the Aerial Part of Rosa laevigata

Eleven chemical constituents were isolated from the ethyl acetate soluble fraction of the aerial part of Rosa laevigata Michx. These compounds include the Henze's ketol (16), diethyl malate (17), three γ-lactones (18-20), loliolide (21), p-coumaric acid (22), 6,7-dimethoxycoumarin (23) and three flavonoids (24-26). The new compounds 19 and 20 were determined to be the cis- and trans-isomers of ethyl 2-benzyl-3-hydroxy-5-oxo-3-furancarboxylate.     

可膨胀石墨催化合成乙酸苄酯

可膨胀石墨作为一种重要的非金属材料已广泛应用于各工业领域 ,将其作为有机质反应催化剂的研究尚不多见[1～ 3] 。工业上 ,乙酸苄酯常是以浓Ｈ2 ＳＯ4、对甲苯磺酸等质子酸作催化剂由乙酸和苄醇制得[4] ,但此法腐蚀设备 ,污染环境 ,且副反应多。近年来 ,为了寻找对设备腐蚀性小的酯化反应催化剂进行了一些研究 ,如曾报道的酯化反应催化剂有 :四氯化锡复合物[5] 、复合固体超强酸[6] 、稀土硫酸盐[7]等。本文报道可膨胀石墨催化乙酸苄酯的合成 ,与其它催化剂相比 ,具有催化活性高 ,反应温度低 ,反应时间短 ,收率高 ,易分离及再生处理简单等…