Quantitative assessment of motion correction for high angular resolution diffusion imaging

Several methods have been proposed for motion correction of high angular resolution diffusion imaging (HARDI) data. There have been few comparisons of these methods, partly due to a lack of quantitative metrics of performance. We compare two motion correction strategies using two figures of merit: displacement introduced by the motion correction and the 95% confidence interval of the cone of uncertainty of voxels with prolate tensors. What follows is a general approach for assessing motion correction of HARDI data that may have broad application for quality assurance and optimization of postprocessing protocols. Our analysis demonstrates two important issues related to motion correction of HARDI data: (1) although neither method we tested was dramatically superior in performance, both were dramatically better than performing no motion correction, and (2) iteration of motion correction can improve the final results. Based on the results demonstrated here, iterative motion correction is strongly recommended for HARDI acquisitions.     

Proposition of a compensated pixelwise calibration for photonic infrared cameras and comparison to classic calibration procedures: Case of thermoelastic stress analysis

In this paper, we propose a compensated pixelwise calibration that integrates the effects of the camera housing temperature. The results of this calibration are compared on black body images to classic two points Non Uniformity Correction based calibrations, compensated or not. It is shown that the proposed approach leads to a significant improvement in the thermal resolution with a reduction in the mean error as well as the standard deviation. The approach is finally challenged on a real case measurement focusing on thermoelasticity. The gain in terms of accuracy measurement is highlighted by comparing the proposed calibration to classic calibrations and the scope of interest of this new calibration is discussed.     

高精度中小11径非球面修抛技术研究

为实现高精度中小口径非球面的加工，介绍了一种非球面修抛技术。基于Preston假设，将抛光过程描述成一个线性方程，计算得到材料的去除量与抛光时间、抛光压力和零件转速之间的函数关系。设计了整体修抛法和环带修抛法两种方法，在数控抛光的基础上，对口径为Ф117mm的凹抛物面和口径为Ф17mm凸双曲面进行修抛，修抛后非球面的面形精度PV值为0．184μm，RMS均小于0．032μm，达到了工程化应用要求，实现了中小口径非球面的高精度加工。     

Error analysis of idealized nanopore sequencing

This numerical study provides an error analysis of an idealized nanopore sequencing method in which ionic current measurements are used to sequence intact single‐stranded DNA in the pore, while an enzyme controls DNA motion. Examples of systematic channel errors when more than one nucleotide affects the current amplitude are detailed, which if present will persist regardless of coverage. Absent such errors, random errors associated with tracking through homopolymer regions are shown to necessitate reading known sequences (Escherichia coli K‐12) at least 140 times to achieve 99.99% accuracy (Q40). By exploiting the ability to reread each strand at each pore in an array, arbitrary positioning on an error rate versus throughput tradeoff curve is possible if systematic errors are absent, with throughput governed by the number of pores in the array and the enzyme turnover rate.     

A Simple Approach for Multi‐fidelity Experimentation Applied to Financial Engineering

In practical applications, information about the accuracy or ‘fidelity’ of alternative surrogate systems may be ambiguous and difficult to determine. To address this problem, we propose to treat surrogate system fidelity level as a categorical factor in optimal response surface design. To design the associated experiments, we apply the Expected Integrated Mean Squared Error optimal design criterion, which takes into account both variance and bias errors. The performance of the proposed design was compared using three test cases to four types of alternatives using the Empirical Integrated Squared Error. Because of its ability to foster relatively accurate predictions, the proposed design is recommended in fidelity experimental design, particularly when the experimenters lack sufficient information about the fidelity levels of surrogate systems. The method was applied to the case of intraday trading optimization in which data were collected from the Taiwan Futures Exchange. We also calculated the implied volatility from the Merton's Jump‐diffusion model via the fast Fourier transform algorithm with three different models of varying fidelity levels. Copyright © 2014 John Wiley & Sons, Ltd.     

Kinetics of radical‐molecule reactions in aqueous solution: A benchmark study of the performance of density functional methods

The performance of 18 density functional approximations has been tested for a very challenging task, the calculations of rate constants for radical‐molecule reactions in aqueous solution. Despite of the many difficulties involved in such an enterprise, six of them provide high quality results, and are recommended to that purpose. They are LC‐ωPBE, M06‐2X, BMK, B2PLYP, M05‐2X, and MN12SX, in that order. This trend was obtained using experimental data as reference. The other relevant aspects used in this benchmark are: (i) the SMD model for mimicking the solvent; (ii) the conventional transition state, the zero‐curvature tunneling correction, and the limit imposed by diffusion for the calculation of the rate constants. Even though changing any of these aspects might alter the trend in performance, at least, when using them, the aforementioned functionals can be successfully used to obtain high quality kinetic data for the kind of reactions investigated in this work. © 2014 Wiley Periodicals, Inc.     

基于黑体标定的红外图像非均匀性校正系统设计

为提高某中波红外探测器的图像质量,设计了基于FPGA的红外图像实时处理系统,系统能够完成实时的非均匀性校正与盲元补偿处理。介绍了目前常用的非均匀性校正、盲元识别和补偿算法,并结合实际工程需求采用多点法进行非均匀性校正以及8点平均法进行盲元补偿。在仿真实验成功的基础上,基于FPGA平台构建了硬件平台。系统可以实现系数自定义更新,可以手动或自动完成非均匀性较正系数计算,以及实现盲元列表的自动更新操作。利用某国产中波红外探测器对处理系统进行了测试试验,实验结果表明:校正后图像非均匀性0.3%,盲元率0.001%。系统工作稳定、可靠,图像处理满足实时性和精度要求。     

An evaluation method based on absolute difference to validate the performance of SBNUC algorithms

Scene-based non-uniformity correction (SBNUC) algorithms are an important part of infrared image processing; however, SBNUC algorithms usually cause two defects: (1) ghosting artifacts and (2) over-correction. In this paper, we use the absolute difference based on guided image filter (AD-GF) method to validate the performance of SBNUC algorithms. We obtain a self-separation source using the improved guided image filter to process the input image, and use the self-separation source to obtain the space-high-frequency parts of the input image and the corrected image. Finally, we use the absolute difference between the two space-high-frequency parts as the evaluation result. Based on experimental results, the AD-GF method has better robustness and can validate the performance of SBNUC algorithms even if ghosting artifacts or over-correction occur. Also the AD-GF method can measure how SBNUC algorithms perform in the time domain, it’s an effective evaluation method for SBNUC algorithm.     

基于神经网络的NMR谱图自动相位校正综合算法

目前,已有多种算法被应用在核磁共振谱图自动相位校正中,由于各种算法本身特性和所基于谱图的具体特性的差异,不同算法对于特征不同的谱图的适用性也各不相同. 针对这一情况,文在综合研究多种现有自动相位校正算法的基础上,提出了一种基于神经网络的,可以根据谱图的特征来选取最合适的算法进行自动相位校正的综合算法. 实验表明,本算法可以获得比以往方法更好的计算结果.