Synthesis and reactivity of thieno[2,3-<Emphasis Type="Italic">b</Emphasis>]pyridine-2,3-diamines

It has been established that the interaction of N¹-(2-hydroxyphenylmethylthieno[2,3-b]pyrid-3-yl)arylamides with hydrazine hydrate leads to thieno[2,3-b]pyridine-2,3-diamines. It was shown that the reaction of the latter with acetylacetone and acetoacetic ester occurs regioselectively at the amino group in position 3 of the thiophene ring. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 9, pp. 1400–1408, September, 2007.     

4-Hydroxy-2-quinolones 120. Synthesis and structure of ethyl 2-hydroxy-4-oxo-4H-pyrido-[1,2-a]pyrimidine-3-carboxylate

An improved method for the preparation and purification of ethyl 2-hydroxy-4-oxo-4H-pyrido[1,2-a]-pyrimidine-3-carboxylates is proposed. According to ¹H and ¹³C NMR spectroscopic data the synthesized compounds exist in DMSO solution in the 2-hydroxy-4-oxo form while in the crystal (at least for the case of the unsubstituted derivative) X-ray analysis shows that it occurs in the bipolar 2,4-dioxo form. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 6, pp. 864–876, June, 2007.     

Tautomerism of the Thioamide Group in 4-Methyl-7-nitro-2,3,4,5-tetrahydro-1,5-benzodiazepine-2-thione

When 4-methyl-7-nitro-2,3,4,5-tetrahydro-1H-1,5-benzodiazepin-2-one were reacted with phosphorus pentasulfide, the corresponding benzodiazepine-2-thione and its thiol tautomer were formed, which via the 2-methylmercapto derivative were converted to 4-(2-acetylhydrazino)-2-methyl-8-nitro-2,3-dihydro-1H-1,5-benzodiazepine.     

Functionalized naphthol[2,3-h] quinoline-7,12-diones

The addition of secondary and primary amines to ethyl (1-amino-9,10-anthraquinon-2-yl)propynoate affords an easily separable mixture of the corresponding ethyl 3-dialkylaminoor 3-alkylamino-3-(1-amino-9,10-anthraquinon-2-yl)acrylate and 3-dialkylamino- or 3-alkylaminonaphthol[2,3-h]quinoline-2(1H), 7,12-trione (in ∼4: 1 ratio). Intramolecular cyclization of the resulting substituted ethyl acrylates results in the formation of 4-dialkylaminoor 4-alkylamino-2-chlorinated pyridine rings. Subsequent nucleophilic substitution of the chlorine atom gives 2-functionalized 4-dialkylamino- or 4-alkylaminonaphtho[2,3-h]quinoline-7,12-diones. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2327–2332, November, 1998.     

Potential non-steroidal estrogens and antiestrogens,IV Organic azides in heterocyclic synthesis,part 13: Synthesis of aza- and diazacoumestrols via azido derivatives

Summary 4-Chloro-3-aryl-coumarins and quinolones2 a–e undergo thermolytic ring closure by reaction with sodium azide in refluxing dimethyl formamide to yield indolo[3,2-c]coumarins and indolo[3,2-c]quinolin-6(5H)-ones6 a–e. In the case of the coumarin2 a the azido coumarin5 can be isolated. The mono- and diazacoumestrol-dimethylethers6 a–c are converted into the coumestrol analogues7 a–c and their diacetyl derivatives8 a–c.

---

Potentielle nichtsteroidale Östrogene und Antiöstrogene, 4. Mitt.: Organische Azide in der Heterocyclensynthese, Teil 13: Synthese von Aza- und Diazacumöstrolen über Azidzwischenstufen

Zusammenfassung 4-Chlor-3-arylcumarine und-chinolone2 a–e reagieren thermolytisch mit Natriumazid in siedendem Dimethylfomamid unter Ringschluß zu Indolo[3,2-c]cumarinen und Indolo[3,2-c]chinolin-6(5H)-onen6 a–e. Nur aus dem Cumarinderivat2 a kann das zwischenzeitlich gebildete Azidocumarin5 isoliert werden. Die so erhaltenen Mono- und Diazacumöstroldimethylether6 a–c werden in die entsprechenden Cumöstrole7 a–c und ihre Diacetylderivate8 a–c umgewandelt.

     

Observations on the swelling characteristics of the zwitterionic hydrogel of poly(1-3-sulfopropyl)-2-vinyl-pyridinium-betaine hydrogel

Samples of poly[1-(3-sulfopropyl)-2-vinyl-pyridinium-betaine] (PSPV) have been synthesized to high conversion by free radical polymerization in aqueous solution of the zwitterionic monomer SPV with several concentrations of the crosslinker N,N′-methylene-bis-acrylamide (MBA). The densities of the resultant xerogels increased regularly with the content of MBA. Hydrogels obtained by swelling them in water and aqueous KSCN solution were examined by gravimetric and dimensional analysis. The water contents increased with decreasing content of MBA, the value of 92.7 wt% at the lowest MBA content being higher than that for other zwitterionic hydrogels. Enhanced swelling occurred in 1 M aq. KSCN at each MBA content, the total swelling being 98.1 wt% at the lowest crosslinker content. Swelling increased with increasing temperature. An approximate procedure to formulating swelling equilibrium in term of the volume fraction of water in hydrogel, in conjunction with the van’t Hoff equation, yields a small positive value for the enthalpy of swelling. This is compared with values derived similarly for other hydrogels.     

Thermodynamics of hydrogen-isotope-exchange reactions. Proton solvation inn-hexanol and water

This paper reports our results for the direct experimental determination of the equilibrium constant for the hydrogen-isotope-exchange reaction, 1/2D₂(g)+HCl(hexOH)=1/2H₂(g)+DCl(hexOD), where hexOH isn-hexanol and hexOD isn-hexanol with deuterium substitution in the alcohol function. The reaction was studied in electrochemical double cells without liquid junction for which the net cell reaction is the above isotope-exchange reaction. The experimentally determined value of ε° (296.0°K) for this cell is 4.03±0.95 mV (strong electrolyte standard states, mole-fraction composition scale); the value of the equilibrium constant for the reaction is 1.17±0.05. The contributions of isotope-exchange and transfer effects to the magnitude of the standard Gibbs energy change for the above reaction and for the analogous reaction 1/2D₂(g)+HCl(aq)=DCl(daq)+1/2H₂(g) are considered. Our results support the conclusion of Heinzinger and Weston that the formulation of the solvated proton in water as H₃O⁺, as opposed to H₉O₄ ⁺, is sufficient for the interpretation of the thermodynamics of hydrogen-isotope-exchange reactions in water. We also find that the formulation of the solvated proton inn-hexanol as ROH ₂ ⁺ is sufficient for the interpretation of our results on the thermodynamics of hydrogen-isotope-exchange inn-hexanol.     

Cloud point extraction equilibrium of lanthanum(III), europium(III) and lutetium(III) using di(2-ethylhexyl)phosphoric acid and Triton X-100

The cloud point extraction behaviors of lanthanoids(III) (Ln(III) = La(III), Eu(III) and Lu(III)) with and without di(2-ethylhexyl)phosphoric acid (HDEHP) using Triton X-100 were investigated. It was suggested that the extraction of Ln(III) into the surfactant-rich phase without added chelating agent was caused by the impurities contained in Triton X-100. The extraction percentage more than 91% for all Ln(III) metals was obtained using 3.0 × 10⁻⁵ mol dm⁻³ HDEHP and 2.0% (v/v) Triton X-100. From the equilibrium analysis, it was clarified that Ln(III) was extracted as Ln(DEHP)₃ into the surfactant-rich phase. The extraction constant of Ln(III) with HDEHP and 2.0% (v/v) Triton X-100 were also obtained.     

Synthesis and thermal decomposition of bismuth peroxotitanate to Bi2Ti2O7

Bi-peroxotitanate was synthesized by a peroxo method and after thermal decomposition Bi₂Ti₂O₇ was obtained. DTA, TG and DSC curves of Bi₂[Ti₂(O₂)₄(OH)₆]5H₂O were recorded and used to determine isothermal conditions suitable for obtaining the intermediate samples corresponding to the phases observed during the thermal decomposition. The samples were identified by quantitative analysis, IR spectroscopy and X-ray analysis. The experimental results were used to propose a mechanism of thermal decomposition of the investigated compound to a nanosized Bi₂Ti₂O₇. The optimum conditions were also determined for obtaining Bi₂Ti₂O₇, which is applicable for piezosensors.     

Direct Electrochemistry of Multi‐Copper Oxidases at Carbon Nanotubes Noncovalently Functionalized with Cellulose Derivatives

This study describes the direct electron transfer of multi‐copper oxidases, i.e., laccase (from Trametes versicolor) and bilirubin oxidase (BOD, from Myrothecium verrucaria) at multiwalled carbon nanotubes (MWNTs) noncovalently functionalized with biopolymers of cellulose derivatives, i.e., hydroxyethyl cellulose (HEC), methyl cellulose (MC), and carboxymethyl cellulose (CMC). The functionalization of the MWNTs with the cellulose derivatives is found to substantially solubilize the MWNTs into aqueous media and to avoid their aggregation on electrode surface. Under anaerobic conditions, the redox properties of laccase and BOD are difficult to be defined with cyclic voltammetry at either laccase/MWNT‐modified or BOD/MWNT‐modified electrodes. The direct electron transfer properties of laccase and BOD are thus studied in terms of the bioelectrocatalytic activities of the laccase/MWNT‐modified and BOD/MWNT‐modified electrodes toward the reduction of oxygen and found to be facilitated at the functionalized MWNTs. The possible application of the laccase‐catalyzed O₂ reduction at the laccase/MWNT‐modified electrode is illustrated by constructing a CNT‐based ascorbate/O₂ biofuel cell with the MWNT‐modified electrode as the anode for the oxidation of ascorbate biofuel.