Synthesis of NiCo2S4 nanospheres/reduced graphene oxide composite as electrode material for supercapacitor

The NiCo₂S₄ nanospheres arrayed on the surface of reduced graphene oxide (rGO) was fabricated via one-step hydrothermal method. The effect of initial feeding mass of Ni(NO₃)₂·6H₂O and Co(NO₃)₂·6H₂O to rGO on the microstructure and electrochemical performance of the as-prepared composites was studied. The results indicated that the specific capacitances of the composites were first increased and then reduced due to the aggregation of NiCo₂S₄ nanospheres. NiCo₂S₄ nanospheres/rGO composites exhibited a remarkable specific capacitance of 1406 F/g and excellent cyclic stability of 82.36% at the current density of 1 A/g, which were better than those of individual NiCo₂S₄ (792 F/g and 64.77%) counterpart. These results showed that the as-prepared NiCo₂S₄ nanospheres/rGO composites were outstanding candidate for electrode material of supercapacitors.     

高分子填料在生物法处理废水中的应用进展

对生物法处理废水用的高分子填料进行了综述。首先,从无机高分子填料、有机高分子填料两方面介绍了其应用特点及对废水中有机物的作用机理和去除效果;其次,介绍了新型生物填料,主要从生物亲和亲水磁性填料和酶促生物填料两方面介绍其在废水处理中的应用。     

光电催化降解邻苯二甲酸二乙酯的研究

采用sol-gel法制备TiO2薄膜光电极，以该电极为工作电极，铂丝作对电极，饱和甘汞电极为参比电极，对邻苯二甲酸乙酯的光电催化降解进行了研究。结果表明：该电极具有n型半导体的特征行为，在外加偏压为＋0．7v、pH=2、50mg／L的H2O2中对初始浓度为50mg／L的DEP溶液光照180min降解率达67．85％，讨论了氧的存在、外加偏压等因素对光电催化反应的影响。     

Application of flow-injection analysis in the on-line monitoring of sugars,lactic acid,protein and biomass during lactic acid fermentations

A laboratory system for the on-line monitoring of important lactic acid fermentation variables is described. The system contains flow-injection analysers for glucose, lactose, galactose, lactate and protein and a continuous-flow analyser for the biomass concentration. The sugar and lactate analysers are based on enzymatic reactions involving oxidases followed by chemiluminescence detection of the hydrogen peroxide formed. The protein analyser is based on the biuret reaction. The system has been used to monitor many fermentation experiments, and some results are presented as examples.     

酶催化反应在立体有机合成中的应用

讨论了水解酶、交换酶以及氧化还原酶催化的位置、对映和潜手性立体专一的反应，包括酶催化的醇或酯的水解反应、酯交换反应、含羰基的化合物及活泼双键的还原反应、ＳＰ￣３杂化的碳及烯的氧化反应（包括Ｂａｙｅｒ－Ｖｉｌｌｉｎｇｅｒ氧化反应）。回顾了酶立体选择性地合成某些重要目标结构的生物催化方法，讨论了酶催化反应的生物合成前景。参考文献１８篇。     

测酚用的酪氨酸酶媒体玻碳电极的研制

通过聚乙烯亚胺(PEI)包埋和外覆Nafion膜 ,将酪氨酸酶固定在以天青—双氰胺 -甲醛聚合物修饰的玻碳电极表面。工作电位 -100mV(vs.SCE),电极对多种酚有响应 ,对苯酚测定的线性范围为0.20～96μmol/L,响应时间t95 小于50s ,用于测标样和炼焦废水样 ,精密度、准确度好。     

铋(Ⅲ)-8-羟基喹哪啶体系极谱行为——表面活性剂增敏机理和分析应用——Ⅱ.铋(Ⅲ)-8-羟基喹哪啶络合物电极反应和十二烷基苯磺酸钠增敏机理

试验表明,铋(Ⅲ)-8-羟基喹哪啶(8-OXQ)络合物(pHll,-0.60V)的峰电流(p)具吸附特性,为准可逆电极反应过程,其电子转移数(n),传递系数(α)及饱和吸附量(Γ_ο)分别为3,0.45,6.5×10~(-12) mol/cm~2。加入十二烷基苯磺酸钠(SDBS)未形成三元络合物,因SDBS的超载强烈吸附,引起诱导吸附,电双层结构激烈变化,而使电流峰形巨变,电流峰高(i_p)增大10余倍。讨论并指出SDBS对Bi(Ⅲ)与8-羟基喹啉(8-OX)及衍生物络合吸附电流增敏或抑制,与试剂组分、结构、解离态及络合物存在状态、电荷数、符号有关。     

二氧化硅纳米与微米颗粒作为固定化酶载体的生物效应

分别将二氧化硅纳米颗粒(SiNPs)与微米颗粒(SiMPs)作为固定化载体, 选择多聚酶牛肝过氧化氢酶(CAT)和单体酶辣根过氧化物酶(HRP)作为酶模型, 通过考察酶固定化后在酶活回收率、热稳定性、 酶促反应最适温度以及酶在水-有机溶剂混合体系中催化能力的变化, 对载体与酶所产生的生物效应差异进行了系统研究. 酶活回收率结果表明, SiNPs显示出比SiMPs优越的对酶无选择性的高生物亲和性, 而SiMPs则能使固定于其上的酶热稳定性大幅度提高, 且二者都能使固定化酶在有机相中的稳定性得到明显增强. 但酶促反应最适温度的变化结果表明, 对不同类型的酶所产生的生物效应则表现出无规律性.     

Sn掺杂二氧化锰超级电容器电极材料

用化学液相法制备了超级电容器用的Sn掺杂二氧化锰电极材料. 采用扫描电镜(SEM)、能谱仪(EDS)和X射线衍射(XRD)光谱对电极材料的形貌和物相进行表征. 结果表明, 所得样品由直径约10 nm, 长约100 nm的棒状物粘结成200-500 nm的球状物, 晶型为δ-MnO2. 循环伏安、电化学交流阻抗和恒流充放电测试表明, 化学掺杂的比例对材料的电化学性能有较大的影响. 当Mn:Sn的摩尔比为50:1时, 电极材料的比电容达到293 F·g-1, 比未掺杂的提高了64.6%. 600次充放电循环后, 比电容稳定在275 F·g-1, 表现出良好的容量保持能力.     

The application of boron-doped diamond electrodes in amperometric biosensors

Boron-doped diamond (BDD) electrodes outperform conventional electrodes in terms of high stability, chemical inertness, wide potential window and low background current. Combining the superior properties of BDD electrodes with the merits of biosensors, such as specificity, sensitivity, and fast response, amperometric biosensors based on BDD electrodes have attracted the interests of many researchers. In this review, the latest advances of BDD electrodes with different surfaces including hydrogen-terminated, oxygen-terminated, metal nanoparticles-modified, amine-terminated, and carboxyl-terminated thin films, and microelectrodes, for the construction of various biosensors or the direct detection of biomolecules were demonstrated. The future trends of BDD electrodes in biosensing were also discussed.