Preconcentration of lead,cadmium, copper and zinc in water at the pg g−1 level by non-boiling evaporation

An evaluation of the non-boiling evaporation technique for the preconcentration of Pb, Cd, Cu, Zn at the pg g^?1 level in water samples is presented. Various improvements were made to allow efficient control of contamination problems at these extremely low concentrations. They include the choice of FEP Teflon for the evaporation containers and the use of sophisticated cleaning, ageing and pre-conditionning procedures. Detailed calibration graphs were obtained down to the sub-pg g^?1 level by processing ultra-low concentration standards. This technique was then applied to the determination of these four metals in snow samples collected in Greenland and Antarctica.     

Screen-printed electrochemical hybridization biosensor for the detection of DNA sequences from the Escherichia coli pathogen

An electrochemical biosensor for the specific detection of short DNA sequences from the E. coli pathogen is described. This hybridization device relies on the immobilization of a 25-mer oligonucleotide probe, from the E. coli lacZ gene, onto a screen-printed carbon electrode. Chronopotentiometric detection of the Co(bpy)₃⁺³ indicator is used for monitoring the hybridization event. Numerous variables of the assay protocol, including those of the probe immobilization step, the hybridization event, and the indicator association/detection, are characterized and optimized. Hybridization times of 2- and 30-min are sufficient for detecting 300- and 50 ng/mL, respectively, of the E. coli DNA target. Applicability to analysis of untreated environmental water samples is illustrated. Such single-use electrochemical sensors hold great promise for decentralized environmental and food testing for the E. coli pathogen.     

Determination of polycyclic aromatic hydrocarbons in water samples using high-performance liquid chromatography with amperometric detection

The determination of polycyclic aromatic hydrocarbons (PAHs) using high-performance liquid chromatography (HPLC) with UV and fluorescence detection has been well established. Although most of the PAHs can be detected by these methods, some environmentally important polyaromatic compounds, such as acenaphthylene, do not show fluorescence and can only be determined by UV detection at higher concentrations. A sensitive and selective determination of acenaphthylene, acenaphthene and the six PAHs listed in the TVO, the German drinking water standard, is also possible by amperometric detection following HPLC separation. The method was applied to the determination of PAHs in different water samples after solid-phase extraction (SPE). The efficiency of the amperometric determination was found to be superior to UV detection (λ = 300 nm).     

Improvement of quality control of speciation analysis using hyphenated techniques A decade of progress within the European Community

The awareness of a need for an improved control of environmental contamination levels has led to the development of new hyphenated techniques for the determination of a wide variety of chemical species (e.g., organotins, methyl-mercury, alkyl-lead compounds etc.). These techniques generally involve many analytical steps such as extraction, derivatisation, separation and detection which have to be carried out in such a way that the speciation is not changed during the abalytical process. The need for evaluating the method's performance has led the BCR programme of the European Commission (now Standards, Measurements and Testing programme) to conduct series of interlaboratory studies during the last decade. These projects followed a step-by-step approach for the evaluation of different steps of the analytical methods used, e.g., simple solutions to test the detection, cleaned extract to evaluate the separation, spiked samples to test the extraction and natural samples to evaluate the whole analytical procedures. These collaborative projects allowed most of the sources of errors related to either a technique or a laboratory to be detected and removed. This paper gives an account of discussions of possible errors occurring in speciation analysis and presents examples of technical scrutiny of hyphenated techniques using chromatography as applied to the determination of tributyltin, methyl-mercury and trimethyllead.     

The circular chemistry conceptual framework: A way forward to sustainability in industry 4.0

1. Download : Download high-res image (233KB)
2. Download : Download full-size image

     

Development of a laccase-based flow injection electrochemical biosensor for the determination of phenolic compounds and its application for monitoring remediation of Kraft E1 paper mill effluent

This paper describes the development of a new system for amperometric determination of phenolic compounds, and its application for monitoring these compounds in paper mill effluent. The method was based on a flow system, a dialysis sampler, and a laccase-based biosensor. The performance of this system was investigated with respect to pH, ionic strength, working potential, and flow-rate dependence. The biosensor showed an excellent long-term stability allowing measurements for over than 3 months. The sensitivity of laccase-based biosensor was tested for phenol, p-chlorophenol, guaiacol and chloroguaiacol; the detector presented selective measurements of micromolar concentration of these compounds. The integration of a dialysis membrane sampling in the system protected the biosensor surface from fouling and gave independence of sample conditions that commonly influence the biosensor performance. These favorable characteristics allowed its application for direct measurements in complex media with no sample pretreatment. This ability was confirmed employing this system in a continuous analysis of phenolic compounds during the remediation of paper mill effluent by ozonization process.     

Spectrophotometric determination of micro amounts of mercury,cadmium, and zinc by stepwise extraction with tribenzylamine

A rapid spectrophotometric method has been developed for the stepwise determination for mercury, cadmium, and zinc in mixtures. Optimal conditions have been established for the extraction efficiency of cadmium and mercury with a chloroform solution of tribenzylamine pre-equilibrated with hydrobromic acid. After addition of dithizone solution to the organic layers the absorbance at 490 nm or 510 nm is measured for mercury or cadmium, respectively. Even when the ratio of mercury, cadmium, and zinc is 10^-1 : 1 : 10^-5 , the metals can be determined successively.     

Derivatisation in gas chromatographic determination of acidic herbicides in aqueous environmental samples

This paper reviews derivatisation processes applied in chromatographic determination of acidic herbicides (with carboxyl and phenol groups), mainly in aqueous environmental samples. The discussion focuses on the basic derivatisation reactions used to convert herbicides to derivatives to make them analysable by gas chromatography, and possibly to reduce detection limits and/or increase extraction recovery from aqueous samples. The reactions are transesterification, esterification, silylation, alkylation, and extractive and pyrolytic alkylation. The reagents used to conduct the reactions are numerous. Diazomethane is a very efficient methylation reagent but explosive and toxic. Methyl iodide also ensures rapid and efficient methylation. Benzyl bromide can be used directly in water but derivatisation yield is low and reproducibility is poor. Butyl chloroformate and dimethyl sulfite can also be used for derivatisation in water, and acetic anhydride can be used for in-situ derivatisation of phenolic herbicides. For increasing selectivity of GC detection pentafluorobenzyl bromide (for ECD) and (2-cyanethyl)dimethyl(diethylamino)silane (for NPD) have been applied. Very characteristic ions are produced in mass spectra if silyl groups are introduced, e.g. by using bis(trimethylsilyl)trifluoroacetamide. Tetramethylammonium, trimethylphenylammonium, tetraalkylammonium, and trimethylsulfonium hydroxides and salts can by used for derivatisation at elevated temperature in the GC injection port. Extractive alkylation is relatively efficient if tetraalkylammonium salts with long chain alkyl groups are used.     

Application of HPLC to measure vanadium in environmental,biological and clinical matrices

Vanadate and vanadium compounds exist in many environmental, biological and clinical matrices, and despite the need only limited progress has been made on the analysis of vanadium compounds. The vanadium coordination chemistry of different oxidation states is known, and the result of the characterization and speciation analysis depends on the subsequent chemistry and the methods of analysis. Many studies have used a range of methods for the characterization and determination of metal ions in a variety of materials. One successful technique is high performance liquid chromatography (HPLC) that has been used mainly for measuring total vanadium level and metal speciation. Some cases have been reported where complexes of different oxidation states of vanadium have been separated by HPLC. Specifically reversed phase (RP) HPLC has frequently been used for the measurement of vanadium. Other HPLC methods such as normal phase, anion-exchange, cation-exchange, size exclusion and other RP-HPLC modes such as, ion-pair and micellar have been used to separate selected vanadium compounds. We will present a review that summarizes and critically analyzes the reported methods for analysis of vanadium salts and vanadium compounds in different sample matrices. We will compare various HPLC methods and modes including sample preparation, chelating reagents, mobile phase and detection methods. The comparison will allow us to identify the best analytical HPLC method and mode for measuring vanadium levels and what information such methods provide with regard to speciation and quantitation of the vanadium compounds.