Transport and Fate of Organic Compounds in the Global Environment

The role of chemistry in our soon-to-be global industrial society requires a global perspective for the discussion of the uptake, transport, and conversion of chemical compounds in the environment. The fate of organic compounds in the volume flow of the atmosphere and hydrosphere can be categorized into transport pathways and adjustments of equilibria in the multiphase system atmosphere-oceans-land surface. The global volume flow in the atmosphere (wind, areas of high and low pressure) and in the hydrosphere (rivers, circulation of water in lakes, ocean currents) alone would account for the transport of organic compounds if they were stable and if all these compounds were molecularly distributed in these phases. However, this particular case is observed only for volatile chlorofluorocarbons and tetrachloromethane. For most organic compounds, complex adsorption/desorption processes on finely dispersed particle phases in the air and water as well as abiotic and biotic transformations determine the transport behavior. The global fate of a compound includes its accumulation as well as its decomposition in defined environmental compartments. Both phenomenon may have long-term consequences in the af-fected areas; this is indicated by the accumulation of polychlorobiphenyls and analogous compounds in marine mammals and deep-sea fauna, and is evident in the decomposition of chlorofluorocarbons in the stratosphere. The accepted definition of the level of a risk, the product of the probability of an event and the potential amount of damage, takes on a new dimension when viewed from a global perspective-especially when one further connects the extent of the damage to the possible means of correction. It is the responsibility of scientists to point out the irreparable regional to global consequences directly and indirectly connected to the production of chemicals and to provide suggestions for prevention. Politicians can only react by applying their methods to limit the damage; however, they cannot generate any solutions based on science.     

A new adsorbent for trace level organic contaminants

Summary A preliminary study has been carried out to evaluate a new adsorbent, Thermosorb, for trace level organic contaminants. For this purpose, a comparison was made with a well-characterized adsorbent, Tenax GC, using a prepared aqueous solution of trace organic components. In addition, a comparison was made of chromatograms of air contaminants obtained using both of these adsorbents, under equivalent conditions. The results clearly indicated the potential of this thermally stable, inorganic adsorbent for many trace organic substances of environmental interest.     

Capillary electrochromatography-applicability to the analysis of pesticides and compounds of environmental concern and the theory of electroosmosis

Summary The applicability of capillary electrochromatography to the automated analysis of pesticides and phthalate esters that are of environmental concern was assessed. Reversed phase packing materials were compared. Column to column and run to run reproducibility was established. Peak height with an internal standard gave the best reproducibility. Faster analysis than alternative HPLC methods was demonstrated for a mixture of the insecticide pirimicarb and related pyrimidines. The relationship between the concentration of an analyte in a sample and at the detector was determined by the use of radio-labelled¹⁴C-pirimicarb. The volume fraction of the liquid zone was 0.64. The possibility of electroosmosis through the pores is discussed with reference to the Rice-Whitehead model for electroosmotic flow in a capillary. A new parameter, the effective pore size is used in equations for electroosmosis through porous packings.     

Permeation liquid membrane for trace metal speciation in natural waters. Transport of liposoluble Cu(II) complexes

In this paper, the transport of Cu(II) in the presence of lipophilic Cu(II) organic complexes through permeation liquid membranes (PLMs) have been investigated. In natural waters, small organic compounds, which form liposoluble neutral complexes with Cu(II), are potentially toxic and bioavailable. Hence, to understand the role of liposoluble Cu(II) complexes in natural waters, four organic ligands: phthalic acid, bipyridyl, pyrocatechol and hydroxyquinoline, which form uncharged or lipophilic Cu(II) complexes, were tested. The results showed that the transport of lipophilic Cu(II) complexes through PLM depends on the lipophilicity of the complex. Applications of PLMs in natural waters are presented.     

Synthesis and Structure of Environmentally Relevant Perfluorinated Sulfonamides

Alkylated perfluorooctanesulfonamides are compounds of environmental concern. To make these compounds available for environmental and toxicological studies, a series of N-alkylated perfluorooctanesulfonamides and structurally related compounds were synthesized by reaction of the corresponding perfluoroalkanesulfonyl fluoride with a suitable primary or secondary amine. Perfluoroalkanesulfonamidoethanols were obtained from the N-alkyl perfluoroalkanesulfonamides either by direct alkylation with bromoethanol or alkylation with acetic acid 2-bromo-ethyl ester followed by hydrolysis of the acetate. N-Alkyl perfluorooctanesulfonamidoacetates were synthesized in an analogous way by alkylation of N-alkyl perfluoroalkanesulfonamides with a bromo acetic acid ester, followed by basic ester hydrolysis. Alternatively, N-alkyl perfluoroalkanesulfonamides can be alkylated with an appropriate alcohol using the Mitsunobu reaction. Perfluorooctanesulfonamide was synthesized from the perfluorooctanesulfonyl fluoride via the azide by reduction with Zn/HCl. All perfluorooctanesulfonamides contained linear as well as branched C₈F₁₇ isomers, typically in a 10:1 to 30:1 ratio. The crystal structures of N-ethyl and N,N-diethyl perfluorooctanesulfonamide show that the S-N bond has considerable double bond character. This double bond character results in a significant rotational barrier around the S-N bond (ΔG^≠ = 62-71 kJ mol⁻¹) and a preferred solid state and solution conformation in which the N-alkyl groups are oriented opposite to the perfluorooctyl group to minimize steric crowding around the S-N bond.     

Decomposition of Toluene and Acetone in Packed Dielectric Barrier Discharge Reactors

The influences of TiO₂ catalytic material and glass pellet packing on the decomposition efficiency of toluene and acetone in air by dielectric barrier discharge (DBD) reactors were experimentally investigated in this study. The effects of both packing materials on the formation of byproducts such as CO and CO₂ were also evaluated. Experimental results indicate that the introduction of glass materials into the plasma zone of a wire-tube reactor would improve the decomposition efficiency of toluene and acetone compared to a nonpacked reactor. The apparent decomposition rate constant of a glass packed-bed reactor was 4.5–4.8 times greater than that of a nonpacked reactor. The results also indicate that the decomposition rate constant of toluene was approximately 2.6 times higher than that of acetone no matter which type reactor was utilized. The application of TiO₂ coated pellets in DBD reactors will enforce the hydrocarbon byproducts to further be oxidized to CO₂, notwithstanding, it will not significantly improve the performance of the reactors in the decomposition of toluene and acetone, and in the formation of CO. The results show that the best selectivity of CO₂ for acetone decomposition in a TiO₂ coated pellets packed-bed reactor was approximately 40% higher than that in a glass packed-bed reactor.     

Multi-Residue Analysis of Some Polar Pesticides in Water Samples with SPE and LC–MS–MS

In the present study a multi-residue analytical method was developed for monitoring some polar pesticides such as acephate, methamidophos, carbofuran, isoproturon, dimethoate in water with SPE (solid-phase extraction) and LC–MS–MS. Acetochlor was taken as surrogate, and alachlor as internal standard. SPE with different types of columns was compared with LLE (liquid-liquid extraction). Further, the breakthrough volume for different pesticides was determined. The results showed that the selected pesticides can be determined very sensitively with LC–MS–MS. The minimum detectable quantity (MDQ) for each pesticide was about 1.0 ng. To date, SPE cartridge studies showed that the Oasis HLB cartridges were suitable for further studies. However, for Oasis HLB cartridge, different pesticide showed different breakthrough volume. The results showed that for acephate and methamidophos, the breakthrough volume was about 30 mL of water sample, much less than the breakthrough volume of other pesticides studied. Because of the higher vapor pressure and higher Henry's constant of methamidophos, dimethoate and carbofuran, much attention should be paid on their losses in the evaporation step of the experiment. This analytical method can be applied to determine pesticide contamination in environmental water samples. Revised: 12 September 2005 and 21 October 2005     

Regulation of plastic from a circular economy perspective

1. Download : Download high-res image (101KB)
2. Download : Download full-size image

     

Electroanalytical sensors for nonconducting media based on electrodes supported on perfluorinated ion-exchange membranes

Electroanalytical sensors, suitable for the analysis and monitoring of electroactive analytes present in gaseous phase or low-conductive liquid media, and based on electrodes in close contact with perfluorinated ion-exchange polymers are reviewed. The basic operative mechanism of these sensors, in which ion-exchange polymers act as solid polymer electrolytes (SPE's), is thoroughly discussed, while stressing the fundamental reasons why their behavior differs from that of conventional membrane electrodes. The procedures for preparing composite working electrodes by coating one side of ion-exchange membranes with stable porous films of conductive materials are described, along with the most common strategies followed to assemble this type of sensors. Useful examples of measurements in electrolyte-free media of inorganic and organic electroactive species of interest mainly for environmental analysis are given. Future prospects for the development of these sensors are also discussed.