Green ultra‐fast high‐performance liquid chromatographic method using a short narrow‐bore column packed with fully porous sub‐2 μm particles for the simultaneous determination of selected pharmaceuticals as surface water and wastewater pollutants

Fast separations are very desirable in laboratories that analyze large numbers of samples per day or those needing short turn‐around times. Traditional HPLC methods using conventional stationary phases and standard column dimensions require significant amounts of organic solvents and generate large volumes of waste. With growing awareness about the environment, the development of green technologies has been receiving increasing attention. In this work, a very fast green analytical method based on LC‐UV using a short narrow bore column packed with fully porous sub‐2 μm particles has been developed for simultaneous determination of nine pharmaceuticals in wastewater and surface water. The chromatographic separation was optimized in order to achieve short analysis time and good resolution for all analytes in a single run. All analytes could be separated in 1 min with good resolution. Sample preparation was executed by solid phase extraction using Oasis HLB cartridges. The method developed was validated based on parameters such as linearity, precision, accuracy, detection, and quantification limits. The recovery ranged from 70.9 to 92.5% with SDs not higher than 5.4%, except for acetaminophen and sulphanilamide. LODs ranged from 0.6–2.5 μg/L, while the LOQs were in the range 2–8 μg/L.     

Extension and application of multivariate curve resolution-alternating least squares to four-way quadrilinear data-obtained in the investigation of pollution patterns on Yamuna River,India—A case study

This study focuses on the development and extension of Multivariate Curve Resolution-Alternating Least Squares (MCR-ALS) to the analysis of four-way datasets. The proposed extension of the MCR-ALS method with non-negativity and the newly developed quadrilinear constraints can be exploited to summarize and manage huge multidimensional datasets and resolve their four way component profiles. In this study, its application is demonstrated by analyzing a four-way data set obtained in a long term environmental monitoring study (15 sampling sites × 9 variables × 12 months × 7 years) belonging to the Yamuna River, one of the most polluted rivers of India and the largest tributary of the Ganges river. MCR-ALS resolved pollution profiles described appropriately the major observed changes on pH, organic pollution, bacteriological pollution and temperature, along with their spatial and temporal distribution patterns for the studied stretch of Yamuna River. Results obtained by MCR-ALS have also been compared with those obtained by another multi-way method, PARAFAC. The methodology used in this study is completely general and it can be applied to other multi-way datasets.     

Vertical distribution of mercury in the Krka river estuary

The concentrations of reactive and total mercury (in the UV-irradiated samples) were measured in unfiltered and acidified samples by atomic absorption. The samples were collected in the vertical profile on one selected station in the Krka river estuary (Croatia) during 1997–2000. The estuary is permanently stratified and characterized by the subsurface temperature maxima. The maximum concentrations of reactive and total mercury range from 0.9 to 3.3?ng?L^?1, and from 1.3 to 6.0?ng?L^?1, respectively. The vertical transport of mercury across the picnocline is enhanced under the influence of a north wind.     

The Use of Various Chromatographic Techniques for the Determination of Phenylurea Herbicides and Their Corresponding Anilines in Environmental Samples,II. Applications

Abstract

In earlier work, various strategies have been developed for the trace-level determination of phenylurea herbicides and the anilines which are their main degradation products. They include catalytic hydrolysis of the phenylureas on silica, liquid chromatographic fractionation of complex mixtures of herbicides and anilines, derivatization of anilines and herbicides with electron-capture-sensitive reagents, and final analysis by means of capillary gas chromatography. In the present paper, the application of these principles to trace-level analysis of surface water, soil and crop samples is demonstrated.     

Biotransformation of musk xylene in trout haemoglobin: dose–response and toxicokinetics of musk xylene metabolites haemoglobin adducts by gas chromatography-mass spectrometry

Musk xylene (MX) is frequently used as a fragrance in commercial toiletries. Biotransformation of MX into 4-amino-MX (4-AMX) and 2-amino-MX (2-AMX) metabolites in rainbow trout haemoglobin (Hb) has been described. The dose–response relationship and toxicokinetics of the metabolites as adducts in the Hb were determined by gas chromatography (GC)–electron capture negative chemical ionization (NCI)–mass spectrometry (MS), and GC–electron ionization (EI)–MS/MS, using selected ion monitoring (SIM). The trout were subjected to a single exposure of 0.010, 0.030, 0.10, and/or 0.30?mg?MX/g of fish. Hb samples were collected from exposed and control fish, and analysed subsequent to exposure at intervals of 24, 72, and 168?h. Alkaline hydrolysis released 4-AMX and 2-AMX metabolites from the Hb, and the solutes were extracted into n-hexane. The extracts were preconcentrated and analysed. The presence of the metabolites in the Hb extracts was confirmed based on agreement of similar mass spectral features from NCI/MS and EI-MS/MS spectra, and retention times of the metabolites with standards. The NCI/MS results were used for dose–response and toxicokinetics measurements. For dose–response, the concentrations of adducts of the metabolites increased with dosage, and a maximum adduct formation was observed at 0.10?mg?g^?1, beyond which it decreased. The average concentrations of 4-AMX and 2-AMX at a dosage of 0.10?mg?g^?1 were 700 and 7.4?ng?g^?1, respectively. For toxicokinetics, the concentration of the metabolites in the Hb reached a maximum in the 3 day sample after administration of MX. Further elimination of the metabolites exhibited kinetics with a half-life estimated to be 1–2 days, assuming first-order kinetics. Quantitations were made based on an internal standard and a calibration plot. In control samples, non-hydrolysed Hb, and reagent blank extracts, the metabolites were not detected. The limits of detection for 4-AMX and 2-AMX in the Hb were approximately 1.7 and 1.4?µg?L^?1, respectively, based on a signal-to-noise ratio of 3 with NCI/MS.     

Assessment of mobility of heavy metals in two soil types by use of column leaching experiments and chemometric evaluation of elution curves

The objectives of this study were to evaluate the mobility of heavy metals (HMs) in two types of soils (acidic forest soil and neutral agricultural soil) by leaching with calcium chloride solution in column experiments. The screening properties of neutral agricultural soil towards pollution by heavy metals (Ni, Cu, Zn and Cd) are approximately 10 times higher than those of acid forest soil. The neutral agricultural soil, polluted artificially by one pore volume (PV) of an HMs solution of concentration 200 mg L^?1, can screen the leaching of these metals over several hundreds of years. The higher apparent desorption rate and per cent desorption of HMs (especially Cd) in acid forest soil indicated a higher potential of intensive migration of the metals across the profile and indicated potential risk of Cd pollution for this type of soil. The latest approach of artificial neural networks to describe transport of HMs in soil has been also evaluated. Using a simple three-layer perceptron topology with three hidden neurons, the experimental data could be simulated. The results suggested that the pH of soil is a major factor controlling the retention of the heavy metals in the soils.     

Lichens as biomonitors for the determination of polycyclic aromatic hydrocarbons (PAHs) in Caracas Valley,Venezuela

Biomonitoring of PAH air pollution using lichens was carried out. Sixteen PAHs were studied in 11 locations along the valley of Caracas (Venezuela). The results of this work indicate that 14 of the 16 analysed PAHs were highly accumulated into the lichen thalli of Pyxine coralligera Malme. PAH levels in the samples revealed that the several volatile PAHs (naphthalene, acenaphtylene, acenaphtene, and fluoranthene) have the highest levels in the majority of the studied locations. The fluoranthene/pyrene and phenantrene/antracene ratios suggested that the major sources of PAHs are anthropogenic, mainly associated with gasoline and diesel combustion (pyrolytic) and unburnt oil derivates (petrogenic). The total PAH concentrations obtained in the present study were in the range of 0.24 to 9.08?µg/g, similar to those reported by other works in European and Asian cities.     

Degradation of the antiviral drug oseltamivir carboxylate in surface water samples

Numerous studies have documented that a wide number of pharmaceuticals used in human and veterinary medicine have the potential to enter the aquatic ecosystem. The antiviral prodrug oseltamivir phosphate has received recent attention with regard to its possible use against the highly pathogenic H5N1 virus. This preliminary laboratory study investigated the persistence of the active antiviral drug, oseltamivir carboxylate (OSC), in water samples taken from an irrigation canal. After an initial rapid decrease, OSC concentrations slowly decreased during the remaining incubation period. Approximately 65% of the initial OSC amount remained in water at the end of the 36-day incubation period. A small amount of OSC was lost both from sterilized water and from sterilized water/sediment samples, suggesting a significant role for microbial degradation. Stimulating microbial processes by the addition of sediments resulted in reduced OSC persistence. Presence of OSC (1.5?µg?mL^?1) did not significantly affect the metabolic potential of the water microbial population, estimated by glyphosate and metolachlor mineralization. In contrast, OSC caused an initial transient decrease in the size of the indigenous microbial population of water samples.     

Challenge to ultra-trace analytical techniques of nuclear materials in environmental samples for safeguards at JAERI: methodologies for physical and chemical form estimation

From a viewpoint of physical and chemical form estimation, ultra-trace analytical techniques of nuclear materials in environmental samples for safeguards have been investigated at Japan Atomic Energy Research Institute. This article deals with (1) an outline of the developed techniques for bulk and particle analyses of uranium and plutonium in the safeguards environmental samples; (2) current R&D on techniques relating to estimation of the physical and chemical form, such as SEM images and EDX spectra for fine particles of nuclear materials and fission track observation applicable to fissile materials; and (3) possible analytical methodologies, as future works, applicable to ultra-trace amounts of nuclear materials in environmental samples.     

Source Apportionment for the Zinc—Containing Component of Air Particulate Matter using Automated Electron Probe Micro Analysis of Individual Particles

Abstract

A methodology is described for the apportionment of zinc-containing particulate matter sampled in the vicinity of a zinc smelter to their corresponding sources in the factory. Bulk samples of particulate matter from six potential emission sources were analysed by automated electron probe microanalysis (EPMA) in order to characterize the individual particles. Based on a data set of relative peak intensities and with the aid of a binary clustering method, the most important particle classes were identified. They were used as a basis for the development of a set of disjunct identification rules (decision rules), which were able to describe the classes in a unique manner. Applying these rules upon ambient particulate data enabled the estimation of relative contributions of different types of zinc-containing particles. Evidence was found that a large number of particles was modified by a soil component or by gas phase reactions.